重新安装 Ubuntu 16.04 - Force UEFI Installation?
1. Preparing to install Ubuntu
Force UEFI Installation?
This machine’s firmware has started the installer in UEFI mode but it looks like there may be existing operating systems already installed using “BIOS compatibility mode”. If you continue to install Debian in UEFI mode, it might be difficult to reboot the machine into any BIOS-mode operating systems later.
If you wish to install in UEFI mode and don’t care about keeping the ability to boot one of the existing systems, you have the option to force that here. If you wish to keep the option to boot an existing operating system, you should choose NOT to force UEFI installation here.
2. UEFI BIOS Utility
Advanced Mode -> Boot -> CSM (Compatibility Support Module)
Compatibility Support Module Configuration
Launch CSM -> Disabled
CSM (兼容性支持模块)
【自动】:系统自动侦测启动设备与附加设备。
【开启】:为获得更好的兼容性,开启 CSM 以完全支持非 UEFI 驱动附加设备,或 Windows UEFI 模式。
【关闭】:关闭 CSM 以完全支持 Windows 安全更新与安全启动。
3. Force UEFI Installation?
Continue in UEFI mode
4. Something else
The partition table format in use on your disks normally requires you to create a separate partition for boot loader code. This partition should be marked for use as an “EFI boot partition” and should be at least 35MB in size. Note that this is not the same as a partition mounted on /boot.
Go Back
EFI System Partition
可以直接选择 1024 MB
Type: efi
Write the changes to disks?
5. Restart Now
Restart Now -> 重启完成之后再退出安装盘