LVS_home目录扩容

实验环境

                虚拟机软件：VMware Workstation

                操作系统：Read Hat Enteprise 6.3

1.查看/dev/sdb硬盘信息 
[ root@template ~]# fdisk /dev/sdb 
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel 
Building a new DOS disklabel with disk identifier 0xcb3a6101. 
Changes will remain in memory only, until you decide to write them. 
After that, of course, the previous content won't be recoverable. 

Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite) 

WARNING: DOS-compatible mode is deprecated. It's strongly recommended to 
switch off the mode (command 'c') and change display units to 
sectors (command 'u'). 

Command (m for help): n 
Command action 
e extended 
p primary partition (1-4) 
p 
Partition number (1-4): 
Value out of range. 
Partition number (1-4): 1 
First cylinder (1-13054, default 1): 
Using default value 1 
Last cylinder, +cylinders or +size{K,M,G} (1-13054, default 13054): 
Using default value 13054 

Command (m for help): t 
Selected partition 1 
Hex code (type L to list codes): p 
Hex code (type L to list codes): 8e 
Changed system type of partition 1 to 8e (Linux LVM) 

Command (m for help): p 

Disk /dev/sdb: 107.4 GB, 107374182400 bytes 
255 heads, 63 sectors/track, 13054 cylinders 
Units = cylinders of 16065 * 512 = 8225280 bytes 
Sector size (logical/physical): 512 bytes / 512 bytes 
I/O size (minimum/optimal): 512 bytes / 512 bytes 
Disk identifier: 0xcb3a6101 

Device Boot Start End Blocks Id System 
/dev/sdb1 1 13054 104856223+ 8e Linux LVM 

Command (m for help): w 
The partition table has been altered! 

Calling ioctl() to re-read partition table. 
Syncing disks. 
2.创建PV 
[ root@template ~]# pvcreate /dev/sdb1 
Writing physical volume data to disk "/dev/sdb1" 
Physical volume "/dev/sdb1" successfully created 
3.查看pv大小 
[ root@template ~]# pvs 
PV VG Fmt Attr PSize PFree 
/dev/sda2 vg_template lvm2 a-- 199.51g 141.57g 
/dev/sdb1 lvm2 a-- 100.00g 100.00g 
4.查看vg大小 
[ root@template ~]# vgs 
VG #PV #LV #SN Attr VSize VFree 
vg_template 1 3 0 wz--n- 199.51g 141.57g 
5.vg扩展 
[ root@template ~]# vgextend vg_template /dev/sdb1 
Volume group "vg_template" successfully extended 
6.查看vg 
[ root@template ~]# vgs 
VG #PV #LV #SN Attr VSize VFree 
vg_template 2 3 0 wz--n- 299.50g 241.57g 
[ root@template ~]# vgdisplay 
--- Volume group --- 
VG Name vg_template 
System ID 
Format lvm2 
Metadata Areas 2 
Metadata Sequence No 9 
VG Access read/write 
VG Status resizable 
MAX LV 0 
Cur LV 3 
Open LV 3 
Max PV 0 
Cur PV 2 
Act PV 2 
VG Size 299.50 GiB 
PE Size 4.00 MiB 
Total PE 76673 
Alloc PE / Size 14832 / 57.94 GiB 
Free PE / Size 61841 / 241.57 GiB 
VG UUID Iaj2et-jkB2-aQbc-pvNo-nKcK-EUnZ-4ituwL 

/dev/mapper/vg_template-lv_root 
50G 1.4G 46G 3% / 
tmpfs 242M 0 242M 0% /dev/shm 
/dev/sda1 485M 32M 429M 7% /boot 
/dev/sr0 3.5G 3.5G 0 100% /media 
/dev/mapper/vg_template-lv_home 
5.0G 160M 4.6G 4% /home 
7.增加home目录的lv至6G 
[ root@template ~]# lvextend -L 6G /dev/mapper/vg_template-lv_home 
Extending logical volume lv_home to 6.00 GiB 
Logical volume lv_home successfully resized 
[ root@template ~]# resize2fs -f /dev/mapper/vg_template-lv_home 
resize2fs 1.41.12 (17-May-2010) 
Filesystem at /dev/mapper/vg_template-lv_home is mounted on /home; on-line resizing required 
old desc_blocks = 1, new_desc_blocks = 1 
Performing an on-line resize of /dev/mapper/vg_template-lv_home to 1572864 (4k) blocks. 
The filesystem on /dev/mapper/vg_template-lv_home is now 1572864 blocks long. 
8.查看home的lv大小 
[ root@template ~]# df -h 
Filesystem Size Used Avail Use% Mounted on 
/dev/mapper/vg_template-lv_root 
50G 1.4G 46G 3% / 
tmpfs 242M 0 242M 0% /dev/shm 
/dev/sda1 485M 32M 429M 7% /boot 
/dev/sr0 3.5G 3.5G 0 100% /media 
/dev/mapper/vg_template-lv_home 
6.0G 160M 5.5G 3% /home 

来自为知笔记(Wiz)

转载于:https://my.oschina.net/Saviorsyang/blog/297596