Hydraulic coupler features are: to eliminate shock and vibration; output speed is lower than the input speed, increases with increasing the speed difference between the two shafts with load; overload performance and good starting performance,
single girder underslung crane the load is too large to stop input rpm still rotating shaft, without causing damage to the power machine; when the load is reduced, the rotational speed of output shaft speed increases until close to the input shaft. Transmission fluid coupling efficiency is equal to the output shaft speed multiplied by the output torque (output power) and the input shaft speed multiplied by the input torque (input power) ratio.
General fluid coupling normal condition when the rotational speed of 0.95 obtain higher than efficiency. Hydraulic coupling characteristics due to the working chamber of the pump wheel, turbine shapes differ. Such as the coupling of oil vent, coupler is in the disengaged state, single girder gantry crane can play a role in the clutch.
General fluid coupling normal condition when the rotational speed of 0.95 obtain higher than efficiency. Hydraulic coupling characteristics due to the working chamber of the pump wheel, turbine shapes differ. Such as the coupling of oil vent, coupler is in the disengaged state, single girder gantry crane can play a role in the clutch.
来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/30085872/viewspace-1385137/,如需转载,请注明出处,否则将追究法律责任。
转载于:http://blog.itpub.net/30085872/viewspace-1385137/