Technicall information:***stop:ox0000000A

A problem has been detected and windows has been shut down

to prevent damage to you computer

I RQL-NOT-LESS-OR-EQUAL

If this is the first time you've seen this stop error screen,restart you computer.If this screen appears again,

follow these steps:

Check to make sure any new hardware or software is properly

installed

If this is a new installed,ask your hardware or software

manufacturer for any windows updates you might need

If problems continue,disable ro remove any newly installed

hardware or software.Disable BOIS memory options such as

caching or shadowing

If you need to use saft mode to remove or disable components,restart you computer,press F8 to select Advanced

startup options,and then select saft mode

Technicall information:***stop:ox0000000A(oxFTTEC718,ox00000002,ox00000001,ox804ED96E)

Beginning dump of physical memory physical memory dump complete contact you system administrator or technical support group for further assistance

可能有个别错漏的地方，请见谅[/QUOTE]

东方快车2003

一个问题已经被检测并且窗户已经被关闭

阻止你的损坏计算机

IRQL-NOT-LESS-OR-EQUAL

如果这是，那么第一次你已经看见这个站错误屏幕,重新开始你计算机.如果这个屏幕再出现，

跟随这些步骤:

检查确信任何新硬件或软件适当是

安装

如果这是一新安装,问你的硬件或软件

为任何窗户的制造商更新你可能需要

如果问题继续，停用ro最新移开任何东西安装

硬件或软件.停用BOIS存储器选择例如

缓冲或shadowing

如果你需要使用saft模式搬迁或停用部件,重新开始你计算机,选择的出版社F8先进

起初选择,然后精选的saft模式

Technicall信息:***停止:ox0000000A(oxFTTEC718,ox00000002,ox00000001,ox804ED96E)

开始物理的存储器的倾卸物理的存储器倾卸完全的接触你为更深的帮助的系统管理人或技术支持团体

 

0000: 53 79 73 74 65 6d 20 45   System E 0008: 72 72 6f 72 20 20 45 72   rror  Er 0010: 72 6f 72 20 63 6f 64 65   ror code 0018: 20 30 30 30 30 30 30 30    0000000 0020: 61 20 20 50 61 72 61 6d   a  Param 0028: 65 74 65 72 73 20 38 36   eters 86 0030: 64 62 31 31 32 30 2c 20   db1120, 0038: 30 30 30 30 30 30 30 32   00000002 0040: 2c 20 30 30 30 30 30 30   , 000000 0048: 30 31 2c 20 38 30 34 66   01, 804f 0050: 30 62 62 61               0bba    Code:

Stop 0x0000000A or IRQL_NOT_LESS_OR_EQUALThe Stop 0xA message indicates that a kernel-mode process or driver attempted to access a memory location to which it did not have permission, or at a kernel interrupt request level (IRQL) that was too high. A kernel-mode process can access only other processes that have an IRQL lower than, or equal to, its own. This Stop message is typically due to faulty or incompatible hardware or software. Interpreting the Message This Stop message has four parameters: Memory address that was improperly referenced. IRQL that was required to access the memory. Type of access (0x00000000 = read operation, 0x00000001 = write operation). Address of the instruction that attempted to reference memory specified in parameter 1. If the last parameter is within the address range of a device driver used on your system, you can determine which device driver was running when the memory access occurred. You can typically determine the driver name by reading the line that begins with: **Address 0xZZZZZZZZ has base at <address>- <driver name> If the third parameter is the same as the first parameter, a special condition exists in which a system worker routine, carried out by a worker thread to handle background tasks known as work items, returned at a higher IRQL. In that case, some of the four parameters take on new meanings: Address of the worker routine. Kernel interrupt request level (IRQL). Address of the worker routine. Address of the work item. Resolving the Problem The following suggestions are specific to Stop 0xA errors. For additional troubleshooting suggestions that apply to all Stop errors, see "Stop Message Checklist" later in this appendix. A Stop 0xA message might occur after installing a faulty device driver, system service, or firmware. If a Stop message lists a driver by name, disable, remove, or roll back the driver to correct the problem. If disabling or removing drivers resolves the issues, contact the manufacturer about a possible update. Using updated software is especially important for multimedia applications, antivirus scanners, and CD mastering tools. A Stop 0xA message might also be due to failing or defective hardware. If a Stop message points to a category of devices (video or disk adapters, for example), try removing or replacing the hardware to determine if it is causing the problem. If you encounter a Stop 0xA message while upgrading to Windows XP Professional, the problem might be due to an incompatible driver, system service, virus scanner, or backup. To avoid problems while upgrading, simplify your hardware configuration and remove all third-party device drivers and system services (including virus scanners) prior to running setup. After you have successfully installed Windows XP Professional, contact the hardware manufacturer to obtain compatible updates. For more information about simplifying your system for troubleshooting purposes, see " Troubleshooting Concepts and Strategies" and "Troubleshooting Startup" in this book. For more information about Stop 0xA messages, see the Microsoft Knowledge Base link on the Web Resources page at [URL=http://www.microsoft.com/windows/reskits/webresources]http://www.microsoft.com/windows/reskits/webresources[/URL]. Search using keywords winnt, 0x0000000A, and 0xA.

[/QUOTE]
停止0x0000000A或IRQL_NOT_LESS_OR_EQUALThe停止消息显示一个核模式过程或司机尝试了它没有许可到其的一个记忆地点到存取的0xA，或在核旁打断请求水平(IRQL)是太高的。
一个核模式过程能有一IRQL的另外的过程仅仅降低的存取与比，或平等者,它的自己的。
这停止消息典型地由于不完美或矛盾的硬件或软件。
解释消息
这停止消息有4个参数:
是的记忆地址不适当地引用了。
被要求到存取的IRQL存储器。
存取的类型(0x00000000 =读手术,0x00000001 =写手术)。
在参数那尝试了到参考书存储器的指令的地址规定了
1.如果最后参数在在你的系统上被使用了的一个设备驱动程序的地址范围以内，你能决定当记忆存取发生了时驱动程序正在运行哪个设备。
由读从开始的行你能典型地决定司机名字:
**在<地址地址0xZZZZZZZZ已经基于>-<司机名字>
如果第3个参数同第一个参数一样，在哪个一个特殊的条件存在系统工人例程,由一条工人线程实行了处理作为工作条款被知道的背景任务,在一更高的IRQL返回了。
那么,一些4个参数呈现新意思:
工人常规的地址。
核中断请求水平(IRQL)。
工人常规的地址。
工作条款的地址。
解决这个问题
下列建议是详细的停止0xA错误。
因为适用于所有的附加的问题解答建议停止错误，看“停止消息清单”以后在这个附录。
一停止在安装一个不完美的设备驱动程序，系统服务，或韧件以后消息可能发生的0xA。
如果一停止消息列表用名字的一个司机，停用，搬迁，或卷司机回来改正这个问题。
如果停用或移开司机解决问题,联系制造商关于一可能更新。
为多媒体应用程序，抗病毒扫描仪，并且掌握工具的CD使用最新的软件是特别重要的。
一停止消息可能由于也正在没有通过的0xA或有缺陷的硬件。
如果一停止消息意义到设备的一个范畴(视频或磁盘改编者,例如),试着搬迁或如果它正在引起这个问题，那么代替硬件决定。
如果你遇到一当升级到职业的Windows XP时停止0xA消息,问题可能是由于一个矛盾的驱动程序，系统服务，病毒扫描仪，或备份。
避免问题当升级时，简单化你的硬件构造并且移开所有的第3宴会设备驱动程序和系统服务(包括病毒扫描仪)在运行安装以前。
在你成功地已经安装职业的Windows XP以后，联系硬件制造商获得兼容的校正。
为为问题解答目的简单化你的系统的更多的信息，看“问题解答概念和策略”并且“问题解答起初”在这本书。
为更多的信息大约停止0xA消息,看见微软知识库在网资源页上在http连接://www.microsoft.com/windows/reskits/webresources。寻找使用关键词winnt，0x0000000A，并且0xA。