日志位置:/opt/netcool/log/ism
配置文件位置:/opt/netcool/etc/ism/props
objectserver.props 最后添加两行,(第一行安装时指定)
Server : "HEJUN"
AuthUserName : "root"
如果配置HTTP Server profile 注意以下
In case your monitor does not show anything (the status is displayed as
unknown), make sure that all the components, like license server, ITCAM for
Internet Service Monitoring server, and datalog component, are running.
Check the log files in the $NCHOME/log/ism folder to see whether there is any
error while starting bridge, ismserver, or http monitor. Also make sure that the
DATALOG entry in $NCHOME/etc/ism/props/ http.props is enabled. You can
enable it by adding the DATALOG : 1 line, if its not there already.
启动命令路径/opt/netcool/ism/bin
./ism_startup.sh start 启动如果报错:
nco_m_bridge: error while loading shared libraries: libpthread.so.0: cannot open shared object file"
修改文件nco_monitor,把LD_ASSUME_KERNEL置为空
if [ "$ARCH" = "linux2x86" ]
then
LD_ASSUME_KERNEL=
export LD_ASSUME_KERNEL
fi
可以用以下命令找出共享库
[root@hejun /opt/netcool/ism/bin]# whereis libpthread
libpthread: /usr/lib/libpthread.so /usr/lib/libpthread.a
[root@hejun /opt/netcool/ism/bin]#
databridge 是连接objectserver和ismserver的桥梁.其它像http,icmp等与bridge相连接.因为此如果要http工作正常.必须要nco_m_bridge运行正常.
来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/22775238/viewspace-620996/,如需转载,请注明出处,否则将追究法律责任。
转载于:http://blog.itpub.net/22775238/viewspace-620996/