SAP MB21创建预留报错- 转换到可选度量单位期间的错误 - 之对策

SAP MM MB21创建预留单据报错- Error during conversion to alternative units of measure -

某日下午收到业务部门报错，说是创建预留单保存报错，

详细错误信息如下：

Error during conversion to alternative units of measure

Message no. XU001

Diagnosis

An error occurred during conversion of the quantity stored to

alternative units of measure or vice versa:

o the quantity stored could not be converted to an alternative unit of

measure to the correct decimal place

o or another conversion error occurred due to unsuitable transfer

parameters when the calling up the quantity conversion

System Response

The item cannot be entered

Procedure

o Check the batch classification

o Check the settings for the use of proportional/product units.

经查，该物料有启用批次双计量单位，除了基本计量单位PC，还有批次特定计量单位W/P (瓦/PC)。而批次特性里没有维护正确的批次特性值，

这样系统在202移动类型预留单据创建的时候，需要去换算将要收进来的120 PC该物料折合成多少功率，因为该特性值没有维护好，所以导致报错。

所以方案就是用MSC2N修改这个批次，维护好功率特性值，然后去创建预留。

2019-05-15 写于苏州市.

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/29829936/viewspace-2644473/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/29829936/viewspace-2644473/