一、要求与拓补图
二、配置IP地址
[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]ip add 192.168.1.1 24
[R1-GigabitEthernet0/0/0]int s4/0/0
[R1-Serial4/0/0]ip add 12.1.1.1 24
[R3]int g0/0/0
[R3-GigabitEthernet0/0/0]ip add 192.168.2.1 24
[R3-GigabitEthernet0/0/0]int s4/0/0
[R3-Serial4/0/0]ip add 32.1.1.1 24
[R4]int g0/0/0
[R4-GigabitEthernet0/0/0]ip add 192.168.3.1 24
[R4-GigabitEthernet0/0/0]int s4/0/0
[R4-Serial4/0/0]ip add 42.1.1.1 24
[R2]int l0
[R2-LoopBack0]ip add 5.5.5.5 24
[R2-LoopBack0]q [R2]int s4/0/0
[R2-Serial4/0/0]ip add 12.1.1.2 24
[R2-Serial4/0/0]int s4/0/1
[R2-Serial4/0/1]ip add 32.1.1.2 24
[R2-Serial4/0/1]int s3/0/0
[R2-Serial3/0/0]ip add 42.1.1.2 24
[R1]ip route-static 0.0.0.0 0 12.1.1.2
[R3]ip route-static 0.0.0.0 0 32.1.1.2
[R4]ip route-static 0.0.0.0 0 42.1.1.2
三、HDLC封装
[R1]int s4/0/0
[R1-Serial4/0/0]link-protocol hdlc
[R2]int s4/0/0
[R2-Serial4/0/0]link-protocol hdlc
四、PAP认证
主认证方配置
[R2]aaa
[R2-aaa]local-user huawei password cipher huawei
[R2-aaa]local-user huawei service-type ppp
[R2]int s4/0/1
[R2-Serial4/0/1]ppp authentication-mode pap
被认证方配置
[R3]int s4/0/0
[R3-Serial4/0/0]ppp pap local-user huawei password cipher huawei
五、chap认证
主认证方配置
[R2]aaa
[R2-aaa]local-user huawei password cipher huawei
[R2-aaa]local-user huawei service-type ppp
[R2]int s3/0/0
[R2-Serial3/0/0]ppp authentication-mode chap
被认证方配置
[R4]int s4/0/0
[R4-Serial4/0/0]ppp chap user huawei
[R4-Serial4/0/0]ppp chap password cipher huawei
六、NAT
[R1]acl 2000 [R1-acl-basic-2000]rule 1 permit source any
[R1-acl-basic-2000]q [R1]int s4/0/0
[R1-Serial4/0/0]nat outbound 2000
[R3]acl 2000
[R3-acl-basic-2000]rule 1 permit source any
[R3-acl-basic-2000]q [R3]int s4/0/0
[R3-Serial4/0/0]nat outbound 2000
[R4]acl 2000
[R4-acl-basic-2000]rule 1 permit source any
[R4-acl-basic-2000]q
[R4]int s4/0/0
[R4-Serial4/0/0]nat outbound 2000
七、搭建MGRE环境
R1配置
[R1]int Tunnel 0/0/0
[R1-Tunnel0/0/0]ip add 10.1.1.1 24
[R1-Tunnel0/0/0]tunnel-protocol gre p2mp
[R1-Tunnel0/0/0]source 12.1.1.1
[R1-Tunnel0/0/0]nhrp network-id 100
R3配置
[R3]int Tunnel 0/0/0
[R3-Tunnel0/0/0]ip add 10.1.1.3 24
[R3-Tunnel0/0/0]tunnel-protocol gre p2mp
[R3-Tunnel0/0/0]source s4/0/0
[R3-Tunnel0/0/0]nhrp network-id 100
[R3-Tunnel0/0/0]nhrp entry 10.1.1.1 12.1.1.1 register
R4配置
[R4]int Tunnel 0/0/0
[R4-Tunnel0/0/0]ip add 10.1.1.4 24
[R4-Tunnel0/0/0]tunnel-protocol gre p2mp
[R4-Tunnel0/0/0]source s4/0/0
[R4-Tunnel0/0/0]nhrp network-id 100
[R4-Tunnel0/0/0]nhrp entry 10.1.1.1 12.1.1.1 register
八、RIP配置
[R1]rip 1
[R1-rip-1]version 2
[R1-rip-1]network 192.168.1.0
[R1-rip-1]network 10.0.0.0
[R1-rip-1]q [R1]int Tunnel 0/0/0
[R1-Tunnel0/0/0]nhrp entry multicast dynamic
[R1-Tunnel0/0/0]undo rip split-horizon
[R3]rip 1
[R3-rip-1]version 2
[R3-rip-1]network 192.168.2.0
[R3-rip-1]network 10.0.0.0
[R4]rip 1
[R4-rip-1]version 2
[R4-rip-1]network 192.168.3.0
[R4-rip-1]network 10.0.0.0