恢复ext4文件系统superblock
1. Create ext4 文件系统。
[root@localhost ~]# mkfs.ext4 /dev/vdb1
[root@localhost ~]# partprobe /dev/vdb
2. 挂载文件系统
[root@localhost ~]# grep vdb2 /etc/fstab
/dev/vdb1 /ext4 ext4 defaults 0 0
[root@localhost ~]# mount -a
[root@localhost ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/vdb1 100G 1.7G 94G 2% /ext4
3. 卸载文件系统,并破坏super block
[root@localhost ~]# umount /ext4
[root@localhost ~]#
[root@localhost ~]# dd if=/dev/zero of=/dev/vdb1 bs=1024 count=5
5+0 records in
5+0 records out
5120 bytes (5.1 kB) copied, 0.00481915 s, 1.1 MB/s
[root@localhost ~]# partx /dev/vdb
partx: /dev/vdb: failed to read partition table
[root@localhost ~]#
[root@localhost ~]# mount /ext4
mount: wrong fs type, bad option, bad superblock on /dev/vdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
[root@localhost ~]# dmesg
[22600278.492089] EXT4-fs (vdb1): VFS: Can't find ext4 filesystem
4. 恢复superblock
[root@localhost ~]# fsck -t ext4 /dev/vdb1
fsck from util-linux 2.20.1
e2fsck 1.41.14 (22-Dec-2010)
fsck.ext4: Superblock invalid, trying backup blocks...
One or more block group descriptor checksums are invalid. Fix? yes
Group descriptor 0 checksum is invalid. FIXED.
Group descriptor 1 checksum is invalid. FIXED.
Group descriptor 2 checksum is invalid. FIXED.
...
Fix? yes
/dev/vdb1: ***** FILE SYSTEM WAS MODIFIED *****
/dev/vdb1: 11/6553600 files (0.0% non-contiguous), 459349/26214144 blocks
5. 测试是否恢复了。
[root@localhost ~]# mount -a
[root@localhost ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/vdb1 100G 1.7G 94G 2% /ext4
1. Create ext4 文件系统。
[root@localhost ~]# mkfs.ext4 /dev/vdb1
[root@localhost ~]# partprobe /dev/vdb
2. 挂载文件系统
[root@localhost ~]# grep vdb2 /etc/fstab
/dev/vdb1 /ext4 ext4 defaults 0 0
[root@localhost ~]# mount -a
[root@localhost ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/vdb1 100G 1.7G 94G 2% /ext4
3. 卸载文件系统,并破坏super block
[root@localhost ~]# umount /ext4
[root@localhost ~]#
[root@localhost ~]# dd if=/dev/zero of=/dev/vdb1 bs=1024 count=5
5+0 records in
5+0 records out
5120 bytes (5.1 kB) copied, 0.00481915 s, 1.1 MB/s
[root@localhost ~]# partx /dev/vdb
partx: /dev/vdb: failed to read partition table
[root@localhost ~]#
[root@localhost ~]# mount /ext4
mount: wrong fs type, bad option, bad superblock on /dev/vdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
[root@localhost ~]# dmesg
[22600278.492089] EXT4-fs (vdb1): VFS: Can't find ext4 filesystem
4. 恢复superblock
[root@localhost ~]# fsck -t ext4 /dev/vdb1
fsck from util-linux 2.20.1
e2fsck 1.41.14 (22-Dec-2010)
fsck.ext4: Superblock invalid, trying backup blocks...
One or more block group descriptor checksums are invalid. Fix? yes
Group descriptor 0 checksum is invalid. FIXED.
Group descriptor 1 checksum is invalid. FIXED.
Group descriptor 2 checksum is invalid. FIXED.
...
Fix? yes
/dev/vdb1: ***** FILE SYSTEM WAS MODIFIED *****
/dev/vdb1: 11/6553600 files (0.0% non-contiguous), 459349/26214144 blocks
5. 测试是否恢复了。
[root@localhost ~]# mount -a
[root@localhost ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/vdb1 100G 1.7G 94G 2% /ext4
来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/29048127/viewspace-1134127/,如需转载,请注明出处,否则将追究法律责任。
转载于:http://blog.itpub.net/29048127/viewspace-1134127/