3 Aspects for Crusher Maintenance in Stone Crushing Plant

Crusher equipment is widely used in Stone Crushing Plant, including jaw crusher for stone coarse crushing, impact crusher for secondary crushing, , or a heavy stone crusher. Sometimes it need to configure the impact crusher equipment according to process requirements. Where the Stone Crushing Plant, equipment maintenance is broken machine and equipment maintenance, well this part of the work will make the Stone Crushing Plant maintenance work to the successful completion. DASWELL technology experts will give some advices from three aspects of the crusher equipment maintenance.

1. Crusher device bearing maintenance

Bearing parts of the crusher is the most easily broken, wear and tear in the use of relatively large so they need regular maintenance, often refueling in order to increase the bearing life.

2.The daily maintenance of the crusher equipment

Crusher prepared in good technical condition for the guarantee, ready to be put into operation, reduce downtime, improve the integrity of the crusher rate, utilization, reduce the wear of the crusher, to extend the life of the crusher; do the regular maintenance force, the right deal with maintenance and repair is not allowed to use to raise or repair is not raised.

3. Crusher equipment lubrication maintenance

Constant attention and a timely lubrication of the friction surface can guarantee the normal operation of the jaw crusher and extend its equipment life. Lubrication grease added to the bearing should be 50-70% of the volume, and it must be replaced every three months. When change the oil one should carefully clean the bearing roller runway with gasoline or kerosene. If the bracket is in contact with the bracket pad, one must inject grease before starting the crusher.

http://www.dwcrusher.com/

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/27663704/viewspace-744445/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/27663704/viewspace-744445/