cmd启用edge_如何在Microsoft Edge中启用暗模式

cmd启用edge

cmd启用edge

Dark mode enabled in the new Chromium-based Microsoft Edge.

Microsoft Edge has a dark theme, but you have to enable it in Edge’s application settings. Even if you enable Windows 10’s dark theme, Edge will keep using its light app mode until you go out of your way to select dark mode.

Microsoft Edge具有深色主题,但是您必须在Edge的应用程序设置中启用它。 即使启用Windows 10的深色主题 ,Edge仍将继续使用其浅色应用程序模式,直到您完全选择深色模式为止。

如何在Microsoft Edge中启用深色主题 (How to Enable the Dark Theme in Microsoft Edge)

To enable the dark theme in the new, Chromium-based Microsoft Edge browser, click the menu button and select “Settings.”

要在新的基于Chromium的Microsoft Edge浏览器中启用深色主题,请单击菜单按钮,然后选择“设置”。

Opening the Settings screen in Microsoft Edge.

Select the “Appearance” category on the left side of the Settings page.

选择“设置”页面左侧的“外观”类别。

Finding the new Microsoft Edge's appearance options.

Click the “Theme” box under Customize browser and select “Dark.”

单击自定义浏览器下的“主题”框,然后选择“暗”。

By default,

  • 1
    点赞
  • 3
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
在STM32使用SPI串口通信,具体配置如下: 1. 确保所需的GPIO端口已设置为SPI功能,并分配SPI的外设时钟。 2. 对SPI进行基本设置,包括Bit数据帧格式,时钟速率等。 3. 配置SPI的断(如果需要)。 4. 配置SPI的NSS(片选)引脚,以在SPI数据传输之前和之后打开和关闭从设备的使能信号。 5. 配置DMA(如果需要)以进行高速SPI数据传输。 下面是一个SPI配置的示例代码段: ```c RCC_APB2PeriphClockCmd(RCC_APB2Periph_SPI1, ENABLE); //使能SPI1时钟 GPIO_PinAFConfig(GPIOA, GPIO_PinSource5, GPIO_AF_SPI1); //PA5映射到SPI1 GPIO_PinAFConfig(GPIOA, GPIO_PinSource6, GPIO_AF_SPI1); //PA6映射到SPI1 GPIO_PinAFConfig(GPIOA, GPIO_PinSource7, GPIO_AF_SPI1); //PA7映射到SPI1 GPIO_InitStructure.GPIO_Pin = GPIO_Pin_5 | GPIO_Pin_6 | GPIO_Pin_7; //配置PA5-PA7为SPI1功能 GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF; //复用功能 GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; GPIO_InitStructure.GPIO_OType = GPIO_OType_PP; GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL; GPIO_Init(GPIOA, &GPIO_InitStructure); SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex; //SPI全双工模式 SPI_InitStructure.SPI_Mode = SPI_Mode_Master; //主设备模式 SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b; //8位数据帧 SPI_InitStructure.SPI_CPOL = SPI_CPOL_Low; //时钟为低电平时有效 SPI_InitStructure.SPI_CPHA = SPI_CPHA_1Edge; //行为标准 SPI_InitStructure.SPI_NSS = SPI_NSS_Soft; //软件控制NSS引脚 SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_16; //波特率预分频器 SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB; //高位先传输 SPI_InitStructure.SPI_CRCPolynomial = 7; SPI_Init(SPI1, &SPI_InitStructure); //初始化SPI1 SPI_Cmd(SPI1, ENABLE); //启用SPI1 ``` 需要根据具体的应用程序进行调整和优化以上设置。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值