如何临时禁用Lutron Caseta电灯开关

Lutron Caseta dimmer switches are typical smart light switches with on/off buttons and dimming controls. However, there’s also a hidden pull-out tab at the bottom for disabling the switch and cutting power when you need to.

路创Caseta调光器开关是典型的智能灯开关，带有开/关按钮和调光控件。 但是，底部还有一个隐藏的拉出选项卡，用于在需要时禁用开关和切断电源。

Lutron calls this feature “FASS” on its Caseta light switches, which stands for Front Accessible Service Switch. It’s there for “safe lamp replacement.” In other words, you use it whenever you need to change out the light bulbs in your light fixtures.

路创在其Caseta灯开关上称此功能为“ FASS”，它表示前可访问服务开关。 在那里是“安全灯的更换”。 换句话说，只要需要更换灯具中的灯泡，就可以使用它。

This little pull-out tab is located on the bottom of the light switch right below the off button.

这个小小的拉出选项卡位于电灯开关底部的关闭按钮正下方。

Place your fingernail underneath, and you’ll find a little notch that lets you pull the switch out.

将指甲放在下面，您会发现一个小缺口，可将开关拉出。

This turns the lights off, but it also cuts power to the light switch and light fixture entirely. So as long as that tab is pulled out, you won’t be able to turn the light on at all.

这会关闭灯，但也会完全切断电灯开关和灯具的电源。 因此，只要拉出该选项卡，您将根本无法打开灯。

So why is a feature like this necessary? I wouldn’t say that it’s absolutely necessary, but it’s a nice safety feature. When changing a light bulb, it’s always a good idea to cut the power completely. With this pull-out tab, you don’t have to go all the way down to the breaker box. Instead, you can just cut power to the light fixture.

那么为什么需要这样的功能呢？ 我不会说这是绝对必要的，但这是一个很好的安全功能。 更换灯泡时，最好完全切断电源。 使用此拉出式选项卡，您不必一直深入到断路器箱。 相反，您可以只切断灯具的电源。

Of course, most people change out bulbs while the power to the fixture is still turned on (which is true even when you turn off the lights at the switch). It doesn’t usually cause any problems, but it’s always better to be safe than sorry should a freak accident occur.

当然，大多数人在仍然打开灯具电源的情况下会更换灯泡(即使您关闭开关处的灯，这也是正确的)。 它通常不会引起任何问题，但是安全起来总比后悔发生意外事故要好。

翻译自: https://www.howtogeek.com/347576/how-to-temporarily-disable-your-lutron-caseta-light-switches/