oculus go_如何强制重启Oculus Go（停止工作时）

oculus go

The Oculus Go headset is really great, but sometimes it just locks up and stops working. And when that happens, the easiest thing to do is reboot it. But what’s the best way to reboot it? Here’s what you need to know.

Oculus Go耳机确实很棒，但有时会锁定并停止工作。 并且当发生这种情况时，最简单的方法就是重新启动它。 但是重新启动它的最佳方法是什么？ 这是您需要知道的。

解决视图问题(如果这是问题) (Fixing View Issues (If That’s the Problem))

If your only problem is that the view is pointed the wrong way, there are two things you can do to fix this. The first is to just put the headset on, and then hold down the Oculus button while your controller is pointed forwards. But you knew that already, right?

如果您唯一的问题是视图指向错误的方向，则可以执行以下两项操作来解决此问题。 第一种是只戴上耳机，然后在控制器朝前的同时按住Oculus按钮。 但是你已经知道了吧？

The second way is to look through the settings for the app you’re in for a “Reset” or “Reset View” option. Not all apps have this feature built in, though. So, head to your Home screen, look down at the menu, and you’ll find a “Reset View” button under Settings. Click that and the headset will reset to where you are looking. It’s great for when you turn around, sit down, or stand up while in the middle of something.

第二种方法是浏览您所用应用程序的“重置”或“重置视图”选项的设置。 不过，并非所有应用程序都内置了此功能。 因此，转到主屏幕，向下浏览菜单，您会在“设置”下找到“重置视图”按钮。 单击该按钮，耳机将重置为您要寻找的位置。 当您在某物中间转身，坐下或站起来时，这非常有用。

以正常方式重启Oculus (Reboot Your Oculus Go the Normal Way)

Assuming that your view isn’t the problem—maybe your controller stopped working, or maybe something else locked up—you can reboot your Oculus Go by pressing down the power button on the front of the headset. When the Power Off menu shows up, click either the “Reboot” or “Power Off” options. We generally recommend powering off, and then waiting a few seconds before pressing power to turn it back on.

假设您的视图不成问题-也许控制器停止工作，或者其他原因被锁定-您可以通过按下耳机前面的电源按钮来重新启动Oculus Go。 当出现“关闭电源”菜单时，单击“重新启动”或“关闭电源”选项。 我们通常建议先关闭电源，然后等待几秒钟再按电源将其重新打开。

强制重新启动Oculus Go(正常方式无效时) (Force Reboot Your Oculus Go (When the Normal Way Doesn’t Work))

If your Oculus Go isn’t responding or the controller isn’t working—and the volume keys aren’t working on the Power Off menu—it’s time for a forced reboot. Yes, this actually happened to us a few times.

如果您的Oculus Go没有响应或控制器没有正常工作-并且“电源关闭”菜单上的音量键不起作用-是时候强制重新启动了。 是的，这实际上发生在我们身上几次。

Just hold down the power button for about 10 seconds, and the unit should turn off. If that doesn’t work, try holding it down for a little longer—it will definitely power it down.

只需按住电源按钮约10秒钟，即可关闭本机。 如果这不起作用，请尝试将其按住一小会儿，它肯定会使其关机。

When it’s fully powered down, you can hold the power button for a few seconds to turn your Oculus Go back on.

完全关闭电源后，您可以按住电源按钮几秒钟以重新打开Oculus Go。

翻译自: https://www.howtogeek.com/351841/how-to-force-reboot-your-oculus-go-when-it-stops-working/

oculus go