crt远程登录后光标闪烁_XP：调整CRT监视器上的屏幕闪烁

crt远程登录后光标闪烁

Let’s face it … CRT monitors are still out there in the office environment.  Where I work we are slowly phasing them out as our budget allows.  The other day I was troubleshooting an issue with an older computer with a CRT monitor and when I looked at it I almost got sick from the flickering screen.  Fixing that issue is easy, here is how.

让我们面对现实吧……CRT显示器仍然在办公室环境中。 在我工作的地方，我们会在预算允许的范围内逐步淘汰它们。 前几天，我正在对一台带有CRT显示器的旧计算机进行故障排除，当我看着它时，我几乎从闪烁的屏幕中感到不适。 解决该问题很容易，这就是方法。

Right Click any open are on the desktop and go to Properties.  This will bring up the Display Properties window.  Now click the Settings tab and then the Advanced button.

右键单击桌面上的任何打开的区域，然后转到“属性”。 这将显示“显示属性”窗口。 现在单击设置选项卡，然后单击高级按钮。

In the Advanced options click the Monitor tab and choose the highest setting the monitor is capable of displaying for Screen refresh rate.  Then click Apply and OK. 

在“高级”选项中，单击“监视器”选项卡，然后选择监视器能够显示的最高屏幕刷新率设置。 然后单击“应用”，然后单击“确定”。

You will notice a great difference in the display as it will be smoother and not flicker crazily.

您会注意到显示屏的巨大差异，因为它更平滑且不会疯狂闪烁。

翻译自: https://www.howtogeek.com/79869/xp-adjust-screen-flickering-on-crt-monitors/

crt远程登录后光标闪烁