自定义行距的宏_自定义Word 2007和2010中的默认行距

自定义行距的宏

If you’ve switched to MS Word 2007 or 2010 from an earlier version, you’ll undoubtedly notice there is more space between lines of text by default. Here we’ll take a look at how to customize the line spacing in Word 2007 & 2010.

如果您已从早期版本切换到MS Word 2007或2010，则无疑会注意到默认情况下文本行之间的空间更大。 在这里，我们将研究如何在Word 2007和2010中自定义行距。

Spacing in Word 2003

Word 2003中的间距

In Word 2003 the default line spacing is 1.0 which might be to compressed for some users.

在Word 2003中，默认行距为1.0，某些用户可能会对其进行压缩。

Change Line Spacing in Word 2007 & 2010

在Word 2007和2010中更改行距

In Word 2007 & 2010 Microsoft changed the default line spacing to 1.15. Which might be ok for some users because the sentences don’t seem so crammed together, but you might want to customize it.

在Word 2007和2010中，Microsoft将默认行距更改为1.15。 对于某些用户来说这可能没问题，因为这些句子似乎并不太挤在一起，但是您可能需要自定义它。

If you want to change the spacing of an entire document, under the Home tab in the Styles group select Change Styles then Style Set.

如果要更改整个文档的间距，请在“样式”组的“主页”选项卡下，选择“更改样式”，然后选择“样式集”。

Then you can hover the pointer over different Style Sets in the list, you can see how it will look with Live Preview. For example here we set it to Word 2003…

然后，您可以将指针悬停在列表中的不同样式集上，可以看到它在实时预览中的外观。 例如，在这里我们将其设置为Word 2003…

And here is an example of the Manuscript Style Set. Hover over any of the Sets in the list and the entire document will change. Once you find one you like just click on it.

这是“原稿样式集”的示例。 将鼠标悬停在列表中的任何Set上，整个文档都会更改。 找到喜欢的人后，只需单击它。

Make a Style Set the Default

将样式设为默认

You might want to the Style Set to default to the one you choose every time you start a new document. To set it as default go to Change Styles then Set as Default.

您可能希望将样式集默认设置为每次启动新文档时选择的样式集。 要将其设置为默认设置，请转到更改样式，然后设置为默认设置。

Here we set it to Word 2003 and anytime we start a new document, it will default to this Style Set with Spacing set to 1.0.

在这里，我们将其设置为Word 2003，并且每当我们启动一个新文档时，它将默认为此样式集，并且“间距”设置为1.0。

Change Line Spacing in Selected Portions of Documents

更改文档中选定部分的行距

If you only want to change the line spacing in select parts of a document, highlight the text to change. Then on the Ribbon in the Paragraph group click on the Line and Paragraph Spacing button.

如果只想更改文档中选定部分的行距，请突出显示要更改的文本。 然后在“段落”组中的“功能区”上，单击“行和段落间距”按钮。

Then select the spacing you want. Again with Live Preview you’ll be able to hover over the different spacing options and see how it will look.

然后选择所需的间距。 再次使用Live Preview，您可以将鼠标悬停在不同的间距选项上，并查看其外观。

If you select Line Spacing Options you can tweak it even more. It shows a small preview screen so you get a general idea of how it will look.

如果选择“行距选项”，则可以进行更多调整。 它显示了一个小的预览屏幕，因此您可以大致了解它的外观。

If you want to change it back you can easily go back to the default. Just click go to Change Styles \ Style Set \ Reset Document Quick Styles.

如果您想将其改回，则可以轻松地返回到默认值。 只需单击转到更改样式\样式集\重置文档快速样式。

If you’re moving from an earlier version of Word to 2007 or 2010, you might want to change the line spacing and set it as default for all new documents. This will help you change the line spacing in specific parts of your documents as well.

如果您是从早期版本的Word迁移到2007或2010，则可能需要更改行距并将其设置为所有新文档的默认值。 这也将帮助您更改文档特定部分的行距。

Here are some other articles that will help you out if you’re moving from Office 2003 to a new version.

如果您要从Office 2003迁移到新版本，这些其他文章将为您提供帮助。

• Bring Office 2003 Menus Back to 2010 & 2010

  将Office 2003菜单返回到2010和2010

• Upgrade Office 2003 to 2010 or Run them Side by Side

  将Office 2003升级到2010或并排运行

• How to Find Office 2003 Commands in Office 2010

  如何在Office 2010中查找Office 2003命令

• Make Learning Office 2007 & 2010 Fun with Ribbon Hero

  借助功能区英雄使Learning Office 2007和2010变得有趣

翻译自: https://www.howtogeek.com/howto/25206/customize-the-default-line-spacing-in-word-2007-2010/

自定义行距的宏