linux重置防火墙_如何将Windows防火墙规则重置为默认值

linux重置防火墙

The built-in Windows firewall is an important part of your system security, but over time, more and more applications end up being allowed through the firewall. Luckily there’s an easy way to reset all the settings to default again.

内置的Windows防火墙是系统安全的重要组成部分，但是随着时间的流逝，最终越来越多的应用程序被允许通过防火墙。 幸运的是，有一种简单的方法可以将所有设置重新重置为默认设置。

It’s worth noting that contrary to popular opinion, you don’t really need to install a third-party firewall most of the time, as the built-in firewall is a lot more powerful than you might realize. And if you don’t know the first thing about firewalls, read our primer on how firewalls actually work.

值得注意的是，与流行观点相反，大多数时候您实际上不需要安装第三方防火墙，因为内置防火墙的功能比您想象的要强大得多。 如果您对防火墙一无所知，请阅读有关防火墙实际工作原理的入门文章。

将防火墙规则重置为默认值 (Reset the Firewall Rules to Default)

It could not be more easy to reset the firewall rules to default, in fact, it’s so easy that it’s as if we hardly needed to write this article at all. Just open up the Windows Firewall by searching your Start Menu or screen for it (don’t choose the advanced firewall panel), open it up, and then click the Restore defaults item on the left side.

将防火墙规则重置为默认值并非易事，事实上，它是如此简单，以至于我们几乎根本不需要编写本文。 只需通过搜索“开始”菜单或屏幕上的Windows防火墙来打开Windows防火墙(不要选择高级防火墙面板)，将其打开，然后单击左侧的“还原默认值”项。

Once there, click the button.

在那里，单击按钮。

That’s pretty much all there is to it.

这几乎就是它的全部。

从命令提示符重置防火墙规则 (Reset the Firewall Rules from the Command Prompt)

You can also reset the firewall rules from the command prompt — search for command prompt in your Start menu, and then instead of hitting the Enter key, right-click on it and choose “Run as administrator” from the context menu. This screenshot is from Windows 10, but it works the same in Vista, 7, 8, or 8.1.

您也可以从命令提示符处重置防火墙规则-在“开始”菜单中搜索命令提示符，然后单击“ Enter”(右键)并从上下文菜单中选择“以管理员身份运行”，而不是按Enter键。 此屏幕截图来自Windows 10，但在Vista，7、8或8.1中也可以使用。

Now that you’ve got the Administrator command prompt open, type in this command:

现在您已经打开了Administrator命令提示符，键入以下命令：

netsh advfirewall reset

netsh advfirewall reset

You’ll see an “Ok.” when you are done.

您会看到一个“确定”。 完成后。

Of course, if you really wanted to be slick you could type that command into the start menu search and then use CTRL + SHIFT + ENTER to run it as administrator.

当然，如果您真的很想打滑，可以在开始菜单搜索中键入该命令，然后使用CTRL + SHIFT + ENTER以管理员身份运行它。

翻译自: https://www.howtogeek.com/201658/how-to-reset-the-windows-firewall-rules-to-default/

linux重置防火墙