mongoDB-db.collection.bulkWrite()

db.collection.bulkWrite()

On this page

• Definition
• Behavior
• Examples

Definition

db.collection.bulkWrite()

MONGO SHELL METHOD

This page documents the mongo shell method, and does not refer to the MongoDB Node.js driver (or any other driver) method. For corresponding MongoDB driver API, refer to your specific MongoDB driver documentation instead.

New in version 3.2.

Performs multiple write operations with controls for order of execution.

db.collection.bulkWrite() has the following syntax:

copy

copied

db.collection.bulkWrite(
   [ <operation 1>, <operation 2>, ... ],
   {
      writeConcern : <document>,
      ordered : <boolean>
   }
)

Parameter	Type	Description
operations	array	An array of bulkWrite() write operations. Valid operations are: insertOne updateOne updateMany deleteOne deleteMany replaceOne See Write Operations for usage of each operation.
writeConcern	document	Optional. A document expressing the write concern. Omit to use the default write concern. Do not explicitly set the write concern for the operation if run in a transaction. To use write concern with transactions, see Transactions and Write Concern.
ordered	boolean	Optional. A boolean specifying whether the mongod instance should perform an ordered or unordered operation execution. Defaults to true. See Execution of Operations

Returns:	A boolean acknowledged as true if the operation ran with write concern or false if write concern was disabled. A count for each write operation. An array containing an _id for each successfully inserted or upserted documents.

Behavior

bulkWrite() takes an array of write operations and executes each of them. By default operations are executed in order. See Execution of Operations for controlling the order of write operation execution.

Write Operations

insertOne

Inserts a single document into the collection.

copy

copied

db.collection.bulkWrite( [
   { insertOne : { "document" : <document> } }
] )

See db.collection.insertOne().

updateOne and updateMany

• updateOne
• updateMany

updateOne updates a single document in the collection that matches the filter. If multiple documents match, updateOne will update the first matching document only.

copy

copied

db.collection.bulkWrite( [
   { updateOne :
      {
         "filter": <document>,
         "update": <document or pipeline>,            // Changed in 4.2
         "upsert": <boolean>,
         "collation": <document>,                     // Available starting in 3.4
         "arrayFilters": [ <filterdocument1>, ... ],  // Available starting in 3.6
         "hint": <document|string>                    // Available starting in 4.2.1
      }
   }
] )

Field	Notes
filter	The selection criteria for the update. The same query selectors as in the db.collection.find() method are available.
update	The update operation to perform. Can specify either: A document that only contains update operator expressions. An aggregation pipeline [ <stage1>, <stage2>, ... ] that specifies the modifications to perform.
upsert	Optional. A boolean to indicate whether to perform an upsert. By default, upsert is false.
arrayFilters	Optional. An array of filter documents that determine which array elements to modify for an update operation on an array field.
collation	Optional. Specifies the collation to use for the operation.
hint	Optional. The index to use to support the update filter. If you specify an index that does not exist, the operation errors. New in version 4.2.1.

For details, see db.collection.updateOne() and db.collection.updateMany().

replaceOne

replaceOne replaces a single document in the collection that matches the filter. If multiple documents match, replaceOne will replace the first matching document only.

copy

copied

db.collection.bulkWrite([
   { replaceOne :
      {
         "filter" : <document>,
         "replacement" : <document>,
         "upsert" : <boolean>,
         "collation": <document>,                    // Available starting in 3.4
         "hint": <document|string>                   // Available starting in 4.2.1
      }
   }
] )

Field	Notes
filter	The selection criteria for the replacement operation. The same query selectors as in the db.collection.find() method are available.
replacement	The replacement document. The document cannot contain update operators.
upsert	Optional. A boolean to indicate whether to perform an upsert. By default, upsert is false.
collation	Optional. Specifies the collation to use for the operation.
hint	Optional. The index to use to support the update filter. If you specify an index that does not exist, the operation errors. New in version 4.2.1.

For details, see to db.collection.replaceOne().

deleteOne and deleteMany

• deleteOne
• deleteMany

deleteOne deletes a single document in the collection that match the filter. If multiple documents match, deleteOne will delete the first matching document only.

copy

copied

db.collection.bulkWrite([
   { deleteOne : {
      "filter" : <document>,
      "collation" : <document>                   // Available starting in 3.4
   } }
] )

Field	Notes
filter	The selection criteria for the delete operation. The same query selectors as in the db.collection.find() method are available.
collation	Optional. Specifies the collation to use for the operation.

For details, see db.collection.deleteOne() and db.collection.deleteMany().

_id Field

If the document does not specify an _id field, then mongod adds the _id field and assign a unique ObjectId for the document before inserting or upserting it. Most drivers create an ObjectId and insert the _id field, but the mongod will create and populate the _id if the driver or application does not.

If the document contains an _id field, the _id value must be unique within the collection to avoid duplicate key error.

Update or replace operations cannot specify an _id value that differs from the original document.

Execution of Operations

The ordered parameter specifies whether bulkWrite() will execute operations in order or not. By default, operations are executed in order.

The following code represents a bulkWrite() with five operations.

copy

copied

db.collection.bulkWrite(
   [
      { insertOne : <document> },
      { updateOne : <document> },
      { updateMany : <document> },
      { replaceOne : <document> },
      { deleteOne : <document> },
      { deleteMany : <document> }
   ]
)

In the default ordered : true state, each operation will be executed in order, from the first operation insertOne to the last operation deleteMany.

If ordered is set to false, operations may be reordered by mongod to increase performance. Applications should not depend on order of operation execution.

The following code represents an unordered bulkWrite() with six operations:

copy

copied

db.collection.bulkWrite(
   [
      { insertOne : <document> },
      { updateOne : <document> },
      { updateMany : <document> },
      { replaceOne : <document> },
      { deleteOne : <document> },
      { deleteMany : <document> }
   ],
   { ordered : false }
)

With ordered : false, the results of the operation may vary. For example, the deleteOne or deleteMany may remove more or fewer documents depending on whether the run before or after the insertOne, updateOne, updateMany, or replaceOne operations.

The number of operations in each group cannot exceed the value of the maxWriteBatchSize of the database. As of MongoDB 3.6, this value is 100,000. This value is shown in the isMaster.maxWriteBatchSize field.

This limit prevents issues with oversized error messages. If a group exceeds this limit, the client driver divides the group into smaller groups with counts less than or equal to the value of the limit. For example, with the maxWriteBatchSize value of 100,000, if the queue consists of 200,000 operations, the driver creates 2 groups, each with 100,000 operations.

NOTE

The driver only divides the group into smaller groups when using the high-level API. If using db.runCommand() directly (for example, when writing a driver), MongoDB throws an error when attempting to execute a write batch which exceeds the limit.

Starting in MongoDB 3.6, once the error report for a single batch grows too large, MongoDB truncates all remaining error messages to the empty string. Currently, begins once there are at least 2 error messages with total size greater than 1MB.

The sizes and grouping mechanics are internal performance details and are subject to change in future versions.

Executing an ordered list of operations on a sharded collection will generally be slower than executing an unordered list since with an ordered list, each operation must wait for the previous operation to finish.

Capped Collections

bulkWrite() write operations have restrictions when used on a capped collection.

updateOne and updateMany throw a WriteError if the update criteria increases the size of the document being modified.

replaceOne throws a WriteError if the replacement document has a larger size than the original document.

deleteOne and deleteMany throw a WriteError if used on a capped collection.

Transactions

db.collection.bulkWrite() can be used inside multi-document transactions.

If run inside a transaction, the collection must already exist for insert and upsert: true operations.

Do not explicitly set the write concern for the operation if run in a transaction. To use write concern with transactions, see Transactions and Write Concern.

IMPORTANT

In most cases, multi-document transaction incurs a greater performance cost over single document writes, and the availability of multi-document transactions should not be a replacement for effective schema design. For many scenarios, the denormalized data model (embedded documents and arrays) will continue to be optimal for your data and use cases. That is, for many scenarios, modeling your data appropriately will minimize the need for multi-document transactions.

For additional transactions usage considerations (such as runtime limit and oplog size limit), see also Production Considerations.

For error handling inside a transaction, see Error Handling inside Transactions.

Error Handling

db.collection.bulkWrite() throws a BulkWriteError exception on errors (unless the operation is part of a transaction on MongoDB 4.0). See Error Handling inside Transactions.

Excluding Write Concern errors, ordered operations stop after an error, while unordered operations continue to process any remaining write operations in the queue, unless when run inside a transaction. See Error Handling inside Transactions.

Write concern errors are displayed in the writeConcernErrors field, while all other errors are displayed in the writeErrors field. If an error is encountered, the number of successful write operations are displayed instead of the inserted _id values. Ordered operations display the single error encountered while unordered operations display each error in an array.

Transactions

db.collection.bulkWrite() can be used inside multi-document transactions.

If run inside a transaction, the collection must already exist for insert and upsert: true operations.

Do not explicitly set the write concern for the operation if run in a transaction. To use write concern with transactions, see Transactions and Write Concern.

IMPORTANT

In most cases, multi-document transaction incurs a greater performance cost over single document writes, and the availability of multi-document transactions should not be a replacement for effective schema design. For many scenarios, the denormalized data model (embedded documents and arrays) will continue to be optimal for your data and use cases. That is, for many scenarios, modeling your data appropriately will minimize the need for multi-document transactions.

For additional transactions usage considerations (such as runtime limit and oplog size limit), see also Production Considerations.

Error Handling inside Transactions

Starting in MongoDB 4.2, if a db.collection.bulkWrite() operation encounters an error inside a transaction, the method throws a BulkWriteException (same as outside a transaction).

In 4.0, if the bulkWrite operation encounters an error inside a transaction, the error thrown is not wrapped as a BulkWriteException.

Inside a transaction, the first error in a bulk write causes the entire bulk write to fail and aborts the transaction, even if the bulk write is unordered.

Examples

Bulk Write Operations

The characters collection in the guidebook database contains the following documents:

copy

copied

{ "_id" : 1, "char" : "Brisbane", "class" : "monk", "lvl" : 4 },
{ "_id" : 2, "char" : "Eldon", "class" : "alchemist", "lvl" : 3 },
{ "_id" : 3, "char" : "Meldane", "class" : "ranger", "lvl" : 3 }

The following bulkWrite() performs multiple operations on the collection:

copy

copied

try {
   db.characters.bulkWrite([
      { insertOne: { "document": { "_id": 4, "char": "Dithras", "class": "barbarian", "lvl": 4 } } },
      { insertOne: { "document": { "_id": 5, "char": "Taeln", "class": "fighter", "lvl": 3 } } },
      { updateOne : {
         "filter" : { "char" : "Eldon" },
         "update" : { $set : { "status" : "Critical Injury" } }
      } },
      { deleteOne : { "filter" : { "char" : "Brisbane"} } },
      { replaceOne : {
         "filter" : { "char" : "Meldane" },
         "replacement" : { "char" : "Tanys", "class" : "oracle", "lvl": 4 }
      } }
   ]);
} catch (e) {
   print(e);
}

The operation returns the following:

copy

copied

{
   "acknowledged" : true,
   "deletedCount" : 1,
   "insertedCount" : 2,
   "matchedCount" : 2,
   "upsertedCount" : 0,
   "insertedIds" : {
      "0" : 4,
      "1" : 5
   },
   "upsertedIds" : {

   }
}

If the collection had contained a document with "_id" : 5" before executing the bulk write, then when the bulk write is executed, the following duplicate key exception would be thrown for the second insertOne:

copy

copied

BulkWriteError({
   "writeErrors" : [
      {
         "index" : 1,
         "code" : 11000,
         "errmsg" : "E11000 duplicate key error collection: guidebook.characters index: _id_ dup key: { _id: 5.0 }",
         "op" : {
            "_id" : 5,
            "char" : "Taeln",
            "class" : "fighter",
            "lvl" : 3
         }
      }
   ],
   "writeConcernErrors" : [ ],
   "nInserted" : 1,
   "nUpserted" : 0,
   "nMatched" : 0,
   "nModified" : 0,
   "nRemoved" : 0,
   "upserted" : [ ]
})

Since ordered is true by default, only the first operation completes successfully. The rest are not executed. Running the bulkWrite() with ordered : false would allow the remaining operations to complete despite the error.

Unordered Bulk Write

The characters collection in the guidebook database contains the following documents:

copy

copied

{ "_id" : 1, "char" : "Brisbane", "class" : "monk", "lvl" : 4 },
{ "_id" : 2, "char" : "Eldon", "class" : "alchemist", "lvl" : 3 },
{ "_id" : 3, "char" : "Meldane", "class" : "ranger", "lvl" : 3 }

The following bulkWrite() performs multiple unordered operations on the characters collection. Note that one of the insertOne stages has a duplicate _id value:

copy

copied

try {
   db.characters.bulkWrite([
      { insertOne: { "document": { "_id": 4, "char": "Dithras", "class": "barbarian", "lvl": 4 } } },
      { insertOne: { "document": { "_id": 4, "char": "Taeln", "class": "fighter", "lvl": 3 } } },
      { updateOne : {
         "filter" : { "char" : "Eldon" },
         "update" : { $set : { "status" : "Critical Injury" } }
      } },
      { deleteOne : { "filter" : { "char" : "Brisbane"} } },
      { replaceOne : {
         "filter" : { "char" : "Meldane" },
         "replacement" : { "char" : "Tanys", "class" : "oracle", "lvl": 4 }
      } }
   ], { ordered : false } );
} catch (e) {
   print(e);
}

The operation returns the following:

copy

copied

BulkWriteError({
   "writeErrors" : [
      {
         "index" : 1,
         "code" : 11000,
         "errmsg" : "E11000 duplicate key error collection: guidebook.characters index: _id_ dup key: { _id: 4.0 }",
         "op" : {
            "_id" : 4,
            "char" : "Taeln",
            "class" : "fighter",
            "lvl" : 3
         }
      }
   ],
   "writeConcernErrors" : [ ],
   "nInserted" : 1,
   "nUpserted" : 0,
   "nMatched" : 2,
   "nModified" : 2,
   "nRemoved" : 1,
   "upserted" : [ ]
})

Since this was an unordered operation, the writes remaining in the queue were processed despite the exception.

Bulk Write with Write Concern

The enemies collection contains the following documents:

copy

copied

{ "_id" : 1, "char" : "goblin", "rating" : 1, "encounter" : 0.24 },
{ "_id" : 2, "char" : "hobgoblin", "rating" : 1.5, "encounter" : 0.30 },
{ "_id" : 3, "char" : "ogre", "rating" : 3, "encounter" : 0.2 },
{ "_id" : 4, "char" : "ogre berserker" , "rating" : 3.5, "encounter" : 0.12}

The following bulkWrite() performs multiple operations on the collection using a write concern value of "majority" and timeout value of 100 milliseconds:

copy

copied

try {
   db.enemies.bulkWrite(
      [
         { updateMany :
            {
               "filter" : { "rating" : { $gte : 3} },
               "update" : { $inc : { "encounter" : 0.1 } }
            },

         },
         { updateMany :
            {
               "filter" : { "rating" : { $lt : 2} },
               "update" : { $inc : { "encounter" : -0.25 } }
            },
         },
         { deleteMany : { "filter" : { "encounter": { $lt : 0 } } } },
         { insertOne :
            {
               "document" :
                  {
                     "_id" :5, "char" : "ogrekin" , "rating" : 2, "encounter" : 0.31
                  }
            }
         }
      ],
      { writeConcern : { w : "majority", wtimeout : 100 } }
   );
} catch (e) {
   print(e);
}

If the total time required for all required nodes in the replica set to acknowledge the write operation is greater than wtimeout, the following writeConcernError is displayed when the wtimeout period has passed.

copy

copied

BulkWriteError({
   "writeErrors" : [ ],
   "writeConcernErrors" : [
      {
         "code" : 64,
         "codeName" : "WriteConcernFailed",
         "errmsg" : "waiting for replication timed out",
         "errInfo" : {
            "wtimeout" : true
         }
      },
      {
         "code" : 64,
         "codeName" : "WriteConcernFailed",
         "errmsg" : "waiting for replication timed out",
         "errInfo" : {
            "wtimeout" : true
         }
      },
      {
         "code" : 64,
         "codeName" : "WriteConcernFailed",
         "errmsg" : "waiting for replication timed out",
         "errInfo" : {
            "wtimeout" : true
         }
      }
   ],
   "nInserted" : 1,
   "nUpserted" : 0,
   "nMatched" : 4,
   "nModified" : 4,
   "nRemoved" : 1,
   "upserted" : [ ]
})

The result set shows the operations executed since writeConcernErrors errors are not an indicator that any write operations failed.