<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r1
[r1]user-interface console 0
[r1-ui-console0]idle-timeout 0 0
[r1-ui-console0]quit
[r1]user-interface console 0
[r1-ui-console0]authentication-mode password
Please configure the login password (maximum length 16):jincheng
[r1-ui-console0]quit
[r1]interface g0/0/0
[r1-GigabitEthernet0/0/0]ip address 192.168.1.1 24
[r1-GigabitEthernet0/0/0]ping 192.168.1.2
PING 192.168.1.2: 56 data bytes, press CTRL_C to break
Reply from 192.168.1.2: bytes=56 Sequence=1 ttl=255 time=60 ms
Reply from 192.168.1.2: bytes=56 Sequence=2 ttl=255 time=20 ms
Reply from 192.168.1.2: bytes=56 Sequence=3 ttl=255 time=10 ms
Reply from 192.168.1.2: bytes=56 Sequence=4 ttl=255 time=20 ms
Reply from 192.168.1.2: bytes=56 Sequence=5 ttl=255 time=30 ms
--- 192.168.1.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 10/28/60 ms
[r1-GigabitEthernet0/0/0]quit
[r1]display ip interface brief
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 2
The number of interface that is DOWN in Physical is 2
The number of interface that is UP in Protocol is 2
The number of interface that is DOWN in Protocol is 2
Interface IP Address/Mask Physical Protocol
GigabitEthernet0/0/0 192.168.1.1/24 up up
GigabitEthernet0/0/1 unassigned down down
GigabitEthernet0/0/2 unassigned down down
NULL0 unassigned up up(s)
[r1]quit
<r1>save
The current configuration will be written to the device.
Are you sure to continue? (y/n)[n]:y
It will take several minutes to save configuration file, please wait.......
Configuration file had been saved successfully
Note: The configuration file will take effect after being activated
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r2
[r2]user-interface console 0
[r2-ui-console0]idle-timeout 0 0
[r2-ui-console0]quit
[r2]aaa
[r2-aaa]local-user jincheng privilege level 15 password cipher xueyuan
Info: Add a new user.
[r2-aaa]local-user jincheng service-type terminal
[r2-aaa]local-user xuesheng privilege level 0 password cipher 123
Info: Add a new user.
[r2-aaa]quit
[r2]user-interface console 0
[r2-ui-console0]authentication-mode aaa
[r2-ui-console0]quit
[r2]quit
<r2>quit
Configuration console exit, please press any key to log on
Login authentication
Username:xuesheng
Password:
<r2>?
User view commands:
display Display information
hwtacacs-user HWTACACS user
local-user Add/Delete/Set user(s)
ping Ping function
quit Exit from current mode and enter prior mode
save Save file
super Modify super password parameters
telnet Open a telnet connection
tracert <Group> tracert command group
<r2>quit
Configuration console exit, please press any key to log on
Login authentication
Username:jincheng
Password:
<r2>?
User view commands:
arp-ping ARP-ping
autosave <Group> autosave command group
backup Backup information
cd Change current directory
clear <Group> clear command group
clock Specify the system clock
cls Clear screen
compare Compare configuration file
copy Copy from one file to another
debugging <Group> debugging command group
delete Delete a file
dialer Dialer
dir List files on a filesystem
display Display information
factory-configuration Factory configuration
fixdisk Try to restory disk
format Format file system
free Release a user terminal interface
ftp Establish an FTP connection
help Description of the interactive help system
hwtacacs-user HWTACACS user
license <Group> license command group
lldp Link Layer Discovery Protocol
local-user Add/Delete/Set user(s)
lock Lock the current user terminal interface
mkdir Create a new directory
more Display the contents of a file
move Move from one file to another
mpls MPLS parameters
mtrace Trace route to multicast source
pad Establish one PAD connection
patch Patch operation
ping <Group> ping command group
power Power on or off operate
pwd Display current working directory
quit Exit from current mode and enter prior mode
reboot Reboot system
refresh Do soft reset
rename Rename a file or directory
reset <Group> reset command group
resource System resources(mem,message,cpu)
return Enter the privileged mode
rmdir Remove an existing directory
rollback Active/standby mainboard rollback command
save <Group> save command group
schedule Schedule system task
screen-length Set the number of lines displayed on a screen
send Send information to other user terminal interfaces
set <Group> set command group
sslvpn Sslvpn
startup Config parameter for system to startup
super Modify super password parameters
system-view SystemView from terminal
telnet Open a telnet connection
terminal Set the terminal line characteristics
test-aaa Accounts test
tftp Establish a TFTP connection
tracert <Group> tracert command group
undelete Restore deleted files or directory
undo Negate a command or set its defaults
unzip Unzip files or directory
upgrade Upgrade
xdsl Display board temperature
zip Zip files or directory
<r2>system-view
Enter system view, return user view with Ctrl+Z.
[r2]interface g0/0/0
[r2-GigabitEthernet0/0/0]ip address 192.168.1.2 24
Nov 2 2022 14:19:55-08:00 r2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r2-GigabitEthernet0/0/0]quit
[r2]quit
<r2>save
The current configuration will be written to the device.
Are you sure to continue? (y/n)[n]:y
It will take several minutes to save configuration file, please wait.......
Configuration file had been saved successfully
Note: The configuration file will take effect after being activated