静态路由综合实验

R1的配置：

Please press enter to start cmd line!

<Huawei>sys    
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R1
[R1]interface LoopBack 0
[R1-LoopBack0]ip address 192.168.1.33 28
[R1-LoopBack0]int lo 1
[R1-LoopBack1]ip address 192.168.1.49 28
[R1-LoopBack1]int g0/0/0
[R1-GigabitEthernet0/0/0]ip add 192.168.1.5 30
Jan 11 2022 22:13:47-08:00 R1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R1-GigabitEthernet0/0/0]int g0/0/1
[R1-GigabitEthernet0/0/1]ip add 192.168.1.1 30
Jan 11 2022 22:14:06-08:00 R1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[R1-GigabitEthernet0/0/1]q
[R1]ip route-static 0.0.0.0 0 192.168.1.2
[R1]ip route-static 0.0.0.0 0 192.168.1.6
[R1]ip route-static 192.168.1.64 27 192.168.1.2
[R1]ip route-static 192.168.1.8 30 192.168.1.2
[R1]ip route-static 192.168.1.96 27 192.168.1.6
[R1]ip route-static 192.168.1.12 30 192.168.1.2

[R1]display ip routing-table 
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
         Destinations : 22       Routes : 23       

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

        0.0.0.0/0   Static  60   0          RD   192.168.1.2     GigabitEthernet
0/0/1
                    Static  60   0          RD   192.168.1.6     GigabitEthernet
0/0/0
      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0
      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0
127.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0
    192.168.1.0/30  Direct  0    0           D   192.168.1.1     GigabitEthernet
0/0/1
    192.168.1.1/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/1
    192.168.1.3/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/1
    192.168.1.4/30  Direct  0    0           D   192.168.1.5     GigabitEthernet
0/0/0
    192.168.1.5/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0
    192.168.1.7/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0
    192.168.1.8/30  Static  60   0          RD   192.168.1.2     GigabitEthernet
0/0/1
   192.168.1.12/30  Static  60   0          RD   192.168.1.2     GigabitEthernet
0/0/1
   192.168.1.16/30  Static  60   0          RD   192.168.1.2     GigabitEthernet
0/0/1
   192.168.1.32/28  Direct  0    0           D   192.168.1.33    LoopBack0
   192.168.1.33/32  Direct  0    0           D   127.0.0.1       LoopBack0
   192.168.1.47/32  Direct  0    0           D   127.0.0.1       LoopBack0
   192.168.1.48/28  Direct  0    0           D   192.168.1.49    LoopBack1
   192.168.1.49/32  Direct  0    0           D   127.0.0.1       LoopBack1
   192.168.1.63/32  Direct  0    0           D   127.0.0.1       LoopBack1
   192.168.1.64/27  Static  60   0          RD   192.168.1.2     GigabitEthernet
0/0/1
   192.168.1.96/27  Static  60   0          RD   192.168.1.6     GigabitEthernet
0/0/0
255.255.255.255/32  Direct  0    0           D   127.0.0.1       InLoopBack0
[R1]undo ip route-static 192.168.1.12 30
[R1]ip route-static 192.168.1.12 30 192.168.1.6
[R1]ip route-static 192.168.1.32 27 NULL 0
[R1]aaa
[R1-aaa]local-user wdj privilege level 15 password cipher 123456

Info: Add a new user.

[R1-aaa]q
[R1]user-interface vt    
[R1]user-interface vty 0
[R1-ui-vty0]au    
[R1-ui-vty0]authentication-mode aaa
[R1-ui-vty0]q

R2的配置：

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys    
[Huawei]sysname R2
[R2]int lo 0
[R2-LoopBack0]ip address 192.168.1.65 28
[R2-LoopBack0]int lo 1
[R2-LoopBack1]ip address 192.168.1.81 28
[R2-LoopBack1]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R2>sys
Enter system view, return user view with Ctrl+Z.
[R2]int g0/0/0
[R2-GigabitEthernet0/0/0]ip add 192.168.1.2 30
Jan 11 2022 22:15:45-08:00 R2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R2-GigabitEthernet0/0/0]int g0/0/1
[R2-GigabitEthernet0/0/1]ip add 192.168.1.9 30
Jan 11 2022 22:16:01-08:00 R2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[R2-GigabitEthernet0/0/1]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R2>sys
Enter system view, return user view with Ctrl+Z.
[R2]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R2>sys
Enter system view, return user view with Ctrl+Z.
[R2]ip ro    
[R2]ip route-    
[R2]ip route-static  0.0.0.0 0 192.168.1.10
[R2]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R2>sys
Enter system view, return user view with Ctrl+Z.
[R2]ip rou    
[R2]ip route-     
[R2]ip route-static 192.168.1.32 27 192.168.1.1
[R2]ip route-static 192.168.1.4 30 192.168.1.1
[R2]ip route-static 192.168.1.96 27 192.168.1.1
[R2]ip route-static 192.168.1.96 27 192.168.1.10
[R2]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R2>sys
Enter system view, return user view with Ctrl+Z.
[R2]ip rou    
[R2]ip route-    
[R2]ip route-static 192.168.1.64 27 n    
[R2]ip route-static 192.168.1.64 27 NULL 0
[R2]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on
 

R3的配置：

Please press enter to start cmd line!

<Huawei>
Jan 11 2022 21:52:15-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEt
hernet0/0/0 has turned into UP state.
<Huawei>
Jan 11 2022 21:53:22-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[1]:Interface GigabitEt
hernet0/0/2 has turned into UP state.
<Huawei>

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys    
[Huawei]sysname R3 
[R3]int lo 0
[R3-LoopBack0]ip address 192.168.1.97 27
[R3-LoopBack0]undo ip add    
[R3-LoopBack0]undo ip add
[R3-LoopBack0]int g0/0/2
[R3-GigabitEthernet0/0/2]ip add 192.168.1.97 27
Jan 11 2022 22:09:33-08:00 R3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/2 has entered the UP state. 
[R3-GigabitEthernet0/0/2]
[R3-GigabitEthernet0/0/2]int g0/0/1
[R3-GigabitEthernet0/0/1]ip add 192.168.1.6 30
Jan 11 2022 22:16:51-08:00 R3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[R3-GigabitEthernet0/0/1]int g0/0/0
[R3-GigabitEthernet0/0/0]ip add 192.168.1.13 30
Jan 11 2022 22:17:43-08:00 R3 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R3-GigabitEthernet0/0/0]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R3>sys
Enter system view, return user view with Ctrl+Z.
[R3]dhcp en    
[R3]dhcp enable 
Info: The operation may take a few seconds. Please wait for a moment.done.
[R3]ip pool a
Info: It's successful to create an IP address pool.
[R3-ip-pool-a]net w    
[R3-ip-pool-a]net wo    
[R3-ip-pool-a]netwo    
[R3-ip-pool-a]network 192.168.1.96 mask 27
[R3-ip-pool-a]gatew    
[R3-ip-pool-a]gateway-list 192.168.1.97
[R3-ip-pool-a]dns    
[R3-ip-pool-a]dns-list 114.114.114.114 8.8.8.8
[R3-ip-pool-a]q
[R3]int g0/0/2
[R3-GigabitEthernet0/0/2]dhcp s    
[R3-GigabitEthernet0/0/2]dhcp select g    
[R3-GigabitEthernet0/0/2]dhcp select global 
[R3-GigabitEthernet0/0/2]q
[R3]ip rou    
[R3]ip route-    
[R3]ip route-static 0.0.0.0 0 192.168.1.14
[R3]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R3>sys
Enter system view, return user view with Ctrl+Z.
[R3]ip r0u    
[R3]ip rou    
[R3]ip route-    
[R3]ip route-static 192.168.1.32 27 192.168.1.5
[R3]ip route-static 192.168.1.0 30 192.168.1.5
[R3]ip route-static 192.168.1.64 27 192.168.1.5
[R3]ip route-static 192.168.1.64 27 192.168.1.14
[R3]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

R4的配置：

Please press enter to start cmd line!
##
<Huawei>
Jan 11 2022 21:52:14-08:00 Huawei %%01IFNET/4/BOARD_ENABLE(l)[0]:Board 4 has bee
n available. 
<Huawei>
Jan 11 2022 21:52:14-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[1]:Interface GigabitE
thernet4/0/0 has been available. 
<Huawei>
Jan 11 2022 21:52:15-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[2]:Interface GigabitEt
hernet0/0/0 has turned into UP state.
<Huawei>
Jan 11 2022 21:52:15-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[3]:Interface GigabitEt
hernet0/0/1 has turned into UP state.
<Huawei>
Jan 11 2022 21:52:15-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[4]:Interface GigabitEt
hernet0/0/2 has turned into UP state.
<Huawei>
Jan 11 2022 21:52:16-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[5]:Interface GigabitEt
hernet4/0/0 has turned into UP state.
<Huawei>

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys    
[Huawei]sysname R4
[R4]int lo0
[R4-LoopBack0]ip address 192.168.1.129 28
[R4-LoopBack0]int lo1
[R4-LoopBack1]ip address 192.168.1.145 28
[R4-LoopBack1]
[R4-LoopBack1]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R4>sys
Enter system view, return user view with Ctrl+Z.
[R4]int g0/0/0
[R4-GigabitEthernet0/0/0]ip add 192.168.1.10 30
Jan 11 2022 22:18:50-08:00 R4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R4-GigabitEthernet0/0/0]int g0/0/1
[R4-GigabitEthernet0/0/1]ip add 192.168.1.14 30
[R4-GigabitEthernet0/0/1]
Jan 11 2022 22:19:06-08:00 R4 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[R4-GigabitEthernet0/0/1]int g4/0/0
[R4-GigabitEthernet4/0/0]ip add 192.168.1.17 30
Jan 11 2022 22:19:33-08:00 R4 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP 
on the interface GigabitEthernet4/0/0 has entered the UP state. 
[R4-GigabitEthernet4/0/0]int g0/0/2
[R4-GigabitEthernet0/0/2]ip add 192.168.1.21 30
Jan 11 2022 22:20:04-08:00 R4 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP 
on the interface GigabitEthernet0/0/2 has entered the UP state. 
[R4-GigabitEthernet0/0/2]q
[R4]ping 192.168.1.9
  PING 192.168.1.9: 56  data bytes, press CTRL_C to break
    Reply from 192.168.1.9: bytes=56 Sequence=1 ttl=255 time=80 ms
    Reply from 192.168.1.9: bytes=56 Sequence=2 ttl=255 time=20 ms
    Reply from 192.168.1.9: bytes=56 Sequence=3 ttl=255 time=20 ms
    Reply from 192.168.1.9: bytes=56 Sequence=4 ttl=255 time=20 ms
    Reply from 192.168.1.9: bytes=56 Sequence=5 ttl=255 time=30 ms

  --- 192.168.1.9 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 20/34/80 ms

[R4]ping 192.168.1.13
  PING 192.168.1.13: 56  data bytes, press CTRL_C to break
    Reply from 192.168.1.13: bytes=56 Sequence=1 ttl=255 time=70 ms
    Reply from 192.168.1.13: bytes=56 Sequence=2 ttl=255 time=40 ms
    Reply from 192.168.1.13: bytes=56 Sequence=3 ttl=255 time=10 ms
    Reply from 192.168.1.13: bytes=56 Sequence=4 ttl=255 time=30 ms
    Reply from 192.168.1.13: bytes=56 Sequence=5 ttl=255 time=20 ms

  --- 192.168.1.13 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 10/34/70 ms

[R4]ping 192.168.1.18
  PING 192.168.1.18: 56  data bytes, press CTRL_C to break
    Reply from 192.168.1.18: bytes=56 Sequence=1 ttl=255 time=90 ms
    Reply from 192.168.1.18: bytes=56 Sequence=2 ttl=255 time=30 ms
    Reply from 192.168.1.18: bytes=56 Sequence=3 ttl=255 time=20 ms
    Reply from 192.168.1.18: bytes=56 Sequence=4 ttl=255 time=10 ms
    Reply from 192.168.1.18: bytes=56 Sequence=5 ttl=255 time=40 ms

  --- 192.168.1.18 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 10/38/90 ms

[R4]ping 192.168.1.22
  PING 192.168.1.22: 56  data bytes, press CTRL_C to break
    Reply from 192.168.1.22: bytes=56 Sequence=1 ttl=255 time=50 ms
    Reply from 192.168.1.22: bytes=56 Sequence=2 ttl=255 time=20 ms
    Reply from 192.168.1.22: bytes=56 Sequence=3 ttl=255 time=20 ms
    Reply from 192.168.1.22: bytes=56 Sequence=4 ttl=255 time=30 ms
    Reply from 192.168.1.22: bytes=56 Sequence=5 ttl=255 time=20 ms

  --- 192.168.1.22 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 20/28/50 ms

[R4]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R4>sys
Enter system view, return user view with Ctrl+Z.
[R4]ip ro    
[R4]ip route-s    
[R4]ip route-static 0.0.0.0 0 192.168.1.18
[R4]int g0/0/2
[R4-GigabitEthernet0/0/2]shu    
[R4-GigabitEthernet0/0/2]shutdown 
Jan 11 2022 22:34:57-08:00 R4 %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEthern
et0/0/2 has turned into DOWN state.
[R4-GigabitEthernet0/0/2]
[R4-GigabitEthernet0/0/2]
Jan 11 2022 22:34:57-08:00 R4 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/2 has entered the DOWN state. 
[R4-GigabitEthernet0/0/2]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R4>sys
Enter system view, return user view with Ctrl+Z.
[R4]ip rou    
[R4]ip route-    
[R4]ip route-static 192.168.1.64 27 192.168.1.9
[R4]ip route-static 192.168.1.0 30 192.168.1.9
[R4]ip route-static 192.168.1.4 30 192.168.1.13
[R4]ip route-static 192.168.1.96 27 192.168.1.13
[R4]ip route-static 192.168.1.32 27 192.168.1.13
[R4]ip route-static 192.168.1.32 27 192.168.1.9
[R4]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R4>sys
Enter system view, return user view with Ctrl+Z.
[R4]int g0/0/2
[R4-GigabitEthernet0/0/2]undo shu    
[R4-GigabitEthernet0/0/2]undo shutdown 
[R4-GigabitEthernet0/0/2]
Jan 11 2022 22:59:01-08:00 R4 %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEthern
et0/0/2 has turned into UP state.
[R4-GigabitEthernet0/0/2]
Jan 11 2022 22:59:01-08:00 R4 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/2 has entered the UP state. 
[R4-GigabitEthernet0/0/2]q
[R4]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R4>sys
Enter system view, return user view with Ctrl+Z.
[R4]ip tou    
[R4]ip rou    
[R4]ip route-    
[R4]ip route-static 192.168.128 27 n    
[R4]ip route-static 192.168.1.            
[R4]ip route-static 192.168.1.128 27 n    
[R4]ip route-static 192.168.1.128 27 NULL 0
[R4]te    
[R4]twl    
[R4]tel    
[R4]telnet 192.168.1.1
           ^
Error: Unrecognized command found at '^' position.
[R4]tel    
[R4]telnet 192.168.1.1
           ^
Error: Unrecognized command found at '^' position.
[R4]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

R5的配置：

Please press enter to start cmd line!

<Huawei>
Jan 11 2022 21:52:15-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEt
hernet0/0/2 has turned into UP state.
<Huawei>
Jan 11 2022 21:52:16-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[1]:Interface GigabitEt
hernet0/0/0 has turned into UP state.
<Huawei>
Jan 11 2022 21:52:31-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[2]:Interface GigabitEt
hernet0/0/1 has turned into UP state.
<Huawei>

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys    
[Huawei]sysname R5
[R5]int lo0
[R5-LoopBack0]ip add 192.168.161 27
                     ^
Error: Wrong parameter found at '^' position.
[R5-LoopBack0]ip add 192.168.1.161 27
[R5-LoopBack0]
[R5-LoopBack0]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R5>sys
Enter system view, return user view with Ctrl+Z.
[R5]int g0/0/0
[R5-GigabitEthernet0/0/0]ip add 192.168.1.18 30
Jan 11 2022 22:20:53-08:00 R5 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R5-GigabitEthernet0/0/0]int g0/0/2
[R5-GigabitEthernet0/0/2]ip add 192.168.1.22 30
Jan 11 2022 22:21:05-08:00 R5 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/2 has entered the UP state. 
[R5-GigabitEthernet0/0/2]int g0/0/1
[R5-GigabitEthernet0/0/1]ip add 56.1.1.1 24
[R5-GigabitEthernet0/0/1]
Jan 11 2022 22:21:32-08:00 R5 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[R5-GigabitEthernet0/0/1]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R5>sys
Enter system view, return user view with Ctrl+Z.
[R5]ip r    
[R5]ip ro    
[R5]ip route-static 0.0.0.0 0 56.1.1.2
[R5]
Jan 11 2022 22:34:58-08:00 R5 %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEthern
et0/0/2 has turned into DOWN state.
[R5]
Jan 11 2022 22:34:58-08:00 R5 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/2 has entered the DOWN state. 
[R5]
Jan 11 2022 22:34:59-08:00 R5 %%01IFPDT/4/IF_STATE(l)[2]:Interface GigabitEthern
et0/0/2 has turned into UP state.
[R5]
Jan 11 2022 22:34:59-08:00 R5 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP 
on the interface GigabitEthernet0/0/2 has entered the UP state. 
[R5]
Jan 11 2022 22:35:03-08:00 R5 %%01IFPDT/4/IF_STATE(l)[4]:Interface GigabitEthern
et0/0/2 has turned into DOWN state.
[R5]
Jan 11 2022 22:35:03-08:00 R5 %%01IFNET/4/LINK_STATE(l)[5]:The line protocol IP 
on the interface GigabitEthernet0/0/2 has entered the DOWN state. 
[R5]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R5>sys
Enter system view, return user view with Ctrl+Z.
[R5]ip ro    
[R5]ip route-    
[R5]ip route-static 192.168.1.32 27 192.168.1.17
[R5]ip route-static 192.168.1.64 27 192.168.1.17
[R5]ip route-static 192.168.1.96 27 192.168.1.17
[R5]ip route-static 192.168.1.128 27 192.168.1.17
[R5]ip route-static 192.168.1.0 30 192.168.1.17
[R5]ip route-static 192.168.1.4 30 192.168.1.17
[R5]ip route-static 192.168.1.8 30 192.168.1.17
[R5]ip route-static 192.168.1.12 30 192.168.1.17
[R5]
Jan 11 2022 22:59:01-08:00 R5 %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEthern
et0/0/2 has turned into UP state.
[R5]
Jan 11 2022 22:59:01-08:00 R5 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/2 has entered the UP state. 
[R5]ip route-static 192.168.1.32 27 192.168.1.21 pr 61
[R5]ip route-static 192.168.1.64 27 192.168.1.21 pr 61
[R5]ip route-static 192.168.1.96 27 192.168.1.21 pr 61
[R5]ip route-static 192.168.1.128 27 192.168.1.21 pr 61
[R5]ip route-static 192.168.1.0 30 192.168.1.21 pr 61
[R5]ip route-static 192.168.1.4 30 192.168.1.21 pr 61
[R5]ip route-static 192.168.1.8 30 192.168.1.21 pr 61
[R5]ip route-static 192.168.1.12 30 192.168.1.21 pr 61
[R5]acl 2000
[R5-acl-basic-2000]ru    
[R5-acl-basic-2000]rule per    
[R5-acl-basic-2000]rule permit s    
[R5-acl-basic-2000]rule permit source 192.168.1.0 0.0.0.255
[R5-acl-basic-2000]q
[R5]int g0/0/1
[R5-GigabitEthernet0/0/1]nat ou    
[R5-GigabitEthernet0/0/1]nat outbound 2000
[R5-GigabitEthernet0/0/1]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R5>tel    
<R5>telnet 192.168.1.1
  Press CTRL_] to quit telnet mode
  Trying 192.168.1.1 ...
  Connected to 192.168.1.1 ...

Login authentication

Username:wdj
Password:
<R1>q

  Configuration console exit, please retry to log on

  The connection was closed by the remote host
<R5>sys
Enter system view, return user view with Ctrl+Z.
[R5]int g0/0/1
[R5-GigabitEthernet0/0/1]nat ser    
[R5-GigabitEthernet0/0/1]nat server pro    
[R5-GigabitEthernet0/0/1]nat server protocol tcp g    
[R5-GigabitEthernet0/0/1]nat server protocol tcp global c    
[R5-GigabitEthernet0/0/1]nat server protocol tcp global current-interface 23 in    

[R5-GigabitEthernet0/0/1]nat server protocol tcp global current-interface 23 ins
ide 192.168.1.1 23
Warning:The port 23 is well-known port. If you continue it may cause function fa
ilure.
Are you sure to continue?[Y/N]:y
[R5-GigabitEthernet0/0/1]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

R6的配置：

Please press enter to start cmd line!
############################################################
<Huawei>
Jan 11 2022 21:52:32-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEt
hernet0/0/0 has turned into UP state.
<Huawei>

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R6
[R6]int lo0
[R6-LoopBack0]ip add 6.6.6.6 24
[R6-LoopBack0]
[R6-LoopBack0]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R6>sys
Enter system view, return user view with Ctrl+Z.
[R6]int g0/0/0
[R6-GigabitEthernet0/0/0]ip add 56.1.1.2 24
Jan 11 2022 22:22:59-08:00 R6 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R6-GigabitEthernet0/0/0]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<R6>tel    
<R6>telnet 56.1.1.1
  Press CTRL_] to quit telnet mode
  Trying 56.1.1.1 ...
  Connected to 56.1.1.1 ...

Login authentication

Username:wdj
Password:
  ----------------------------------------------------------------------------- 
    
  User last login information:     
  -----------------------------------------------------------------------------
  Access Type: Telnet      
  IP-Address : 192.168.1.18     
  Time       : 2022-01-11 23:15:01-08:00     
  -----------------------------------------------------------------------------
<R1>
<R1>
<R1>
<R1>qq
    ^
Error: Unrecognized command found at '^' position.
<R1>q

  Configuration console exit, please retry to log on

  The connection was closed by the remote host
<R6>save
  The current configuration will be written to the device. 
  Are you sure to continue? (y/n)[n]:y
  It will take several minutes to save configuration file, please wait........
  Configuration file had been saved successfully
  Note: The configuration file will take effect after being activated
<R6>

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on