RPM链路探测

---

前言

该功能使网络运营商及其客户能够准确测量两个端点之间的网络性能。

---

一、拓扑如下：

二、配置

1.ISP配置如下：

set interfaces ge-0/0/2 unit 0 family inet address 10.1.1.2/30
set interfaces lo0 unit 0 family inet address 10.63.251.33/24
set routing-options static route 0.0.0.0/0 next-hop 10.1.1.1

2.路由器MX104配置如下：

root@SIG-G-YZ-F2-J-RT-MX104-3th-2> show configuration |display set 
set services rpm probe TZ-MX104-3th-2-New test ge-0/0/2-CTC-MSTPBJ1002807848 probe-type icmp-ping
set services rpm probe TZ-MX104-3th-2-New test ge-0/0/2-CTC-MSTPBJ1002807848 target address 10.1.1.2
set services rpm probe TZ-MX104-3th-2-New test ge-0/0/2-CTC-MSTPBJ1002807848 probe-count 3
set services rpm probe TZ-MX104-3th-2-New test ge-0/0/2-CTC-MSTPBJ1002807848 probe-interval 10
set services rpm probe TZ-MX104-3th-2-New test ge-0/0/2-CTC-MSTPBJ1002807848 test-interval 10
set services rpm probe TZ-MX104-3th-2-New test ge-0/0/2-CTC-MSTPBJ1002807848 source-address 10.1.1.1
set services rpm probe TZ-MX104-3th-2-New test ge-0/0/2-CTC-MSTPBJ1002807848 thresholds successive-loss 3
set services rpm probe TZ-MX104-3th-2-New test ge-0/0/2-CTC-MSTPBJ1002807848 thresholds total-loss 3
set services rpm probe TZ-MX104-3th-2-New test ge-0/0/2-CTC-MSTPBJ1002807848 traps test-completion
set services rpm probe TZ-MX104-3th-2-New test ge-0/0/2-CTC-MSTPBJ1002807848 traps test-failure
set services rpm probe TZ-MX104-3th-2-New test ge-0/0/2-CTC-MSTPBJ1002807848 destination-interface ge-1/0/0.0
set interfaces ge-1/0/0 unit 0 family inet address 10.1.1.1/30
set interfaces ge-1/1/0 unit 0 family inet address 192.168.1.1/30
set policy-options policy-statement import-3th-StaticRoute term LH-YBT-HengFeng-Bank from protocol static 
set policy-options policy-statement import-3th-StaticRoute term LH-YBT-HengFeng-Bank from route-filter 10.63.251.33/24 exact
set policy-options policy-statement import-3th-StaticRoute term LH-YBT-HengFeng-Bank then metric 100
set policy-options policy-statement import-3th-StaticRoute term LH-YBT-HengFeng-Bank then tag 100
set policy-options policy-statement import-3th-StaticRoute term LH-YBT-HengFeng-Bank then external type 1
set policy-options policy-statement import-3th-StaticRoute term LH-YBT-HengFeng-Bank then accept
set routing-options rpm-tracking route 10.63.251.0/24 next-hop 10.1.1.2
set routing-options rpm-tracking route 10.63.251.0/24 rpm-probe TZ-MX104-3th-2-New rpm-test ge-0/0/2-CTC-MSTPBJ1002807848
set protocols ospf area 0.0.0.0 interface ge-1/1/0.0
set protocols ospf export import-3th-StaticRoute

3.交换机配置如下：

set interfaces ge-0/0/0 unit 0 family inet address 192.168.1.2/30
set protocols ospf area 0.0.0.0 interface ge-0/0/0.0

---

三、验证

1.MX104正常情况下 RPM探测状态及路由表：

2.交换机正常情况下OSPF状态及路由表：

3.交换机ping ISP lo0.0接口：

4.当与ISP互联接口UP但路由不通，RPM icmp-ping探测timeout，同时重分发路由失效：

5.交换机的10.63.251.0/24的路由失效：

6.当路由器与ISP互联接口恢复，重分发路由恢复：

7.交换机重新学习到10.63.251.0/24的路由：