下图为NXOpen Python的参考指南
代码如下
import NXOpen.UF as UF
ufsession=UF.UFSession.GetUFSession()
t=ufsession.ModlFeatures.CreateSimpleHole([46.0,102.0,100.0],[0.0,0.0,-1.0],'10','10','0',51076,0)
效果如下
下图为NXOpen Python的参考指南
代码如下
import NXOpen.UF as UF
ufsession=UF.UFSession.GetUFSession()
t=ufsession.ModlFeatures.CreateSimpleHole([46.0,102.0,100.0],[0.0,0.0,-1.0],'10','10','0',51076,0)
效果如下