ILOM escalation mode下的管理命令用法几输出

进入ILOM的escalation mode后就如果获得了ILOM Linux系统的root权限，收集了一些管理命令的作用及其输出
/usr/local/bin
bash-2.05b# ls
ChassisCtrl capichsupporttest capislottest fmadm luproxy showdiagstatus
IPMIMain capicompcounttest capistrerrortest fmdump memstore showpsnc
JTAG_CPUSelect capicustfrutest capisunfrutest fmstat mtd slic_test
JTAG_CapDR_To_Exit1DR capidirectd capiswcaptest fpga ncsi-check-links.sh snapshot
JTAG_IRPath capiflttest capitcontroltest fpgahb ncsid snapshot.bin
JTAG_LoadDR capifruidtest capitctrltest fru ncsitool snapshot.cli
JTAG_LoadIR capifruinfotest capitpmtest fru_hotplug_actions newflasher snmpd
JTAG_MacroDump capifrulktest cdserver fru_update nf_upgrade sp_trace_ctl
JTAG_ReadCreg capifrutest check_jffs2_mtd_parts fruadmcmd ntpd sp_trace_view
JTAG_ReadMem capigetbrandingtest clearfru fruimagedump ntpdate spdformat
JTAG_Reset capigetfruinfotest collectDebugInfo.sh fruupdate oembrand spsh
JTAG_ScanDR_Path capigetplattest consd fw_printenv package spshexec
JTAG_ScanDump capigetremplatinfo copypsnc fw_setenv parse_sensors sptest
JTAG_ScanIR_Path capihostidtest count_fds getilomint plat sscan
JTAG_Shift capihostnmitest cover_closed_actions getty.sh platinit statistics
JTAG_TMS capihpeventtest dasboot gmilomtest pmbus stdiscoverer
JTAG_Tck capiidentifytest dbgLevelUpdater gmtest pmon stdowngrade
JTAG_WriteCreg capiinvtest defaulthost gpio pnp-jtag-server stlistener
JTAG_WriteMem capildomtest dhclient gpio21 pod stopdiag
JTAG_ZAMSelect capiledtest dhcpparam.sh gpiodrvcmd poke sunserviceacct
JTAG_ZamClockStop capimgmtporttest dnssearch gpiotool post_restore swinj
JTAG_ZamScanDump capimttest dumpregs handle_major_change post_upgrade syslogd
LAN capinemportmodetest dynafrud health pre_conf_check testconn
MsgHndlr capinemreinserttest dynafrud_stop hidserver prtfru timexec
PEF capinemusertest ealertd hostd psn-change-handler tlip
Timer capinetworktest early_ereports htsignond rbashcmd togglefpgahb
VbscIfc capiopdatatest elogs hw rbashcmd_script tokend
ac_off_sp capiopsinfotest envtest hwclock resetdiagstatus ubenv
adviserd capipingtest erase-mtd i2ctest restoreConfOnDngrade ubip
amiupdate capipmbudgettest erase_ilom_fs i2ctool restore_tli unload_floppy
astutil capipmruntimebudgettest erase_plat_fs idtutil.sh rshell update-psn-cache
autofwupdate capipmtest erptlog ipblocking rshell_utils upgrade_conf
bbrd capipolicytest etcd ipmiint rundiag usrmgt_downgrade
bbrd_logger capipowermtest eventmgr ipmikill saveConfOnUpgrade usrmgt_upgrade
boot_timer capiprep2rmtest fanctrl ipmitool save_tli vbsc_test
capi capipropstest fans.sh ipv6_cfg_dad sbash watchdogd
capi_assoc_test capipwrtest fdclient jedi_clis scc_check webgo
capi_entities capirdy2rmtest fdd klogd seriald webgo_log.sh
capi_indicator capiresetkwh fdserver ledtest seriallink xcp
capi_inventory_direct capiresettest featurecheck load_floppy servicetool xir
capi_sensor capirespsutest find_blob_in_flash log-injector setbaud.sh xscp
capi_sensor_data_test capiscalabilitytest fishwrapd logmgr setdiagopt
capiasrtest capisensortest flashfpga losetup setpsnc
capibiostest capisim flashupdateFPGA luapiquery setsc
capichslottest capisimload flashversion lumain setup_ldapuser.sh
bash-2.05b# cd …/sbin
bash-2.05b# ls
health_watch.sh keep_alive.sh openwsmand reboot sfcbd

b. 可用命令

bash-2.05b# flashversion
Primary flash version : 3.0.16.7
Primary flash details:
VERSION : 3.0.16.7
DATE : Fri May 11 06:56:33 PDT 2012
BUILD : r72431
REPOSITORY : http://ilomsvn.us.oracle.com/svnht/platform/hotamale/branches/3.0.16.7
USER : cboland@sanpen-rh5-0
COMMENT : @(#) Sun System Firmware 8.2.0.a 2012/05/11 06:56
PLATFORM : sparc_rf3

Secondary flash version : 3.0.16.1.b
Secondary flash details:
VERSION : 3.0.16.1.b
DATE : Thu Jun 9 12:37:44 PDT 2011
BUILD : r65028
REPOSITORY : http://ilomsvn.east/svnht/platform/hotamale/branches/3.0.16.1
USER : cb75630@sanpen-rh5-0
COMMENT : @(#) Sun System Firmware 8.1.0.c 2011/06/09 12:38
PLATFORM : sparc_rf3

bash-2.05b# clearfru -h
Usage:

Clear FRUs by deleting selected elements:

clearfru [-d elem[, elem…]] [-f file]
clearfru [-d elem[, elem…]] [-f file] [-y] [container_nac_name]

-h: prints help information on the tool.
-d: delete given (rather than default) elements
-f: read “file” (instead of /usr/include/deinfo.xml) for elements
-y: do not prompt for confirmation

List frutree clearfru -l
clearfru -l [container_nac_name]

Print elements that would be deleted (non-destructive):

clearfru -p [-d elem[, elem…]] [-f file]

To see the version information [-V]

clearfru -V

bash-2.05b# clearfru -V

Version: 3.0 2008/10/14
bash-2.05b# clearfru -l
/SYS/PM0 (container)
/SYS/PM0/CMP0/BOB0/CH0/D0 (container)
/SYS/PM0/CMP0/BOB0/CH1/D0 (container)
/SYS/PM0/CMP0/BOB1/CH0/D0 (container)
/SYS/PM0/CMP0/BOB1/CH1/D0 (container)
/SYS/PM0/CMP0/BOB2/CH0/D0 (container)
/SYS/PM0/CMP0/BOB2/CH1/D0 (container)
/SYS/PM0/CMP0/BOB3/CH0/D0 (container)
/SYS/PM0/CMP0/BOB3/CH1/D0 (container)
/SYS/PM0/CMP1/BOB0/CH0/D0 (container)
/SYS/PM0/CMP1/BOB0/CH1/D0 (container)
/SYS/PM0/CMP1/BOB1/CH0/D0 (container)
/SYS/PM0/CMP1/BOB1/CH1/D0 (container)
/SYS/PM0/CMP1/BOB2/CH0/D0 (container)
/SYS/PM0/CMP1/BOB2/CH1/D0 (container)
/SYS/PM0/CMP1/BOB3/CH0/D0 (container)
/SYS/PM0/CMP1/BOB3/CH1/D0 (container)
/SYS/PM1 (container)
/SYS/PM1/CMP0/BOB0/CH0/D0 (container)
/SYS/PM1/CMP0/BOB0/CH1/D0 (container)
/SYS/PM1/CMP0/BOB1/CH0/D0 (container)
/SYS/PM1/CMP0/BOB1/CH1/D0 (container)
/SYS/PM1/CMP0/BOB2/CH0/D0 (container)
/SYS/PM1/CMP0/BOB2/CH1/D0 (container)
/SYS/PM1/CMP0/BOB3/CH0/D0 (container)
/SYS/PM1/CMP0/BOB3/CH1/D0 (container)
/SYS/PM1/CMP1/BOB0/CH0/D0 (container)
/SYS/PM1/CMP1/BOB0/CH1/D0 (container)
/SYS/PM1/CMP1/BOB1/CH0/D0 (container)
/SYS/PM1/CMP1/BOB1/CH1/D0 (container)
/SYS/PM1/CMP1/BOB2/CH0/D0 (container)
/SYS/PM1/CMP1/BOB2/CH1/D0 (container)
/SYS/PM1/CMP1/BOB3/CH0/D0 (container)
/SYS/PM1/CMP1/BOB3/CH1/D0 (container)
/SYS/MB (container)
/SYS/MB/SP (container)
/SYS/MB/FIO (container)
/SYS/MB/REM0 (container)
/SYS/MB/REM1 (container)
/SYS/MB/SASBP0 (container)
/SYS/MB/SASBP1 (container)
/SYS/MB_ENV (container)
/SYS/RIO (container)
/SYS/PS0 (container)
/SYS/PS1 (container)
/SYS/PS2 (container)
/SYS/PS3 (container)
/SYS/PDB (container)

bash-2.05b# copypsnc -h
Number of arguments is incorrect.
Usage:
copypsnc [-n]
where is PRIMARY|BACKUP1|BACKUP2
is PRIMARY|BACKUP1|BACKUP2
-n: If src is a bilingual FRU, copy from new-style record.
PRIMARY: fruid:///SYS/PDB
BACKUP1: file:///persist/psnc_backup1.xml
BACKUP2: fruid:///SYS/MB/FIO

bash-2.05b# count_fds -h
/proc/1/fd 1
/proc/10/fd 0
/proc/1030/fd 2
/proc/1032/fd 2
/proc/1035/fd 23
/proc/1041/fd 11
/proc/1046/fd 5
/proc/1051/fd 4
/proc/1053/fd 11
/proc/1055/fd 11
/proc/1056/fd 11

bash-2.05b# defaulthost
ORACLESP-1108BDRA12

bash-2.05b# dhclient -h
Internet Systems Consortium DHCP Client V3.0.1
Copyright 2004 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/products/DHCP
Usage: dhclient [-1dqr] [-nw] [-p ] [-s server]
[-cf config-file] [-lf lease-file][-pf pid-file] [-e VAR=val]
[-sf script-file] [interface]

bash-2.05b# elogs
Usage: elogs [-eh1lcV] [-u uuid]
-e display the complete error logs
-h display log of actions (suspect lists etc)
-1 display the first error log (initial errors, fixed max size)
-l display the current error log (current errors, rotated)
-u select events that match the specified uuid
-c clear the ereport logs
-V set very verbose mode: display complete event contents
bash-2.05b# elogs -e
Jan 26 05:38:45
Class: ereport.cpu.generic-sparc.l2data
ENA=0x141e2ba85dbd0402
Failed to open /persist/ereports/ereports.lastlog. Ereport log may not exist.
bash-2.05b# elogs -h
Failed to open /persist/faults/faults.history. FM history log may not exist.
bash-2.05b# elogs -l
Failed to open /persist/ereports/ereports.lastlog. Ereport log may not exist.
bash-2.05b# elogs -Ve
Jan 26 05:38:45
nvlist version: 0
class = ereport.cpu.generic-sparc.l2data
ena = 0x141e2ba85dbd0402
detector = (embedded nvlist)
nvlist version: 0
version = 0x0
scheme = hc
hc-root =
hc-list-sz = 3
hc-list = (array of embedded nvlists)
(start hc-list[0])
nvlist version: 0
hc-name = chassis
hc-id = 0
(end hc-list[0])
(start hc-list[1])
nvlist version: 0
hc-name = cpuboard
hc-id = 1
(end hc-list[1])
(start hc-list[2])
nvlist version: 0
hc-name = chip
hc-id = 2
(end hc-list[2])

 (end detector)

 __tod = 0x388e8865 0x16bcc940
 diagnose = 1
 tstate = 0x4400001604
 htstate = 0x0
 tpc = 0x134d2cc
 tl = 0x1
 tt = 0x40
 d-esr = 0x80000000000000
 index = 0xcdb
 way = 0x13
 clr = 0x1
 l2-esr = 0x100000800000000
 l2-esr2 = 0x5f
 l2-ear = 0x1301ff70b36e0
 l2-v-bits = 0x1b00001effffff
 l2-a-bits = 0x1b000000000000
 l2-d-bits = 0x1b000001f3a2d4
 l2-s-bits = 0x1b000007484808
 l2-U-bits = 0x1b000000fffffd
 platform-specific = (embedded nvlist)
 nvlist version: 0
 (end platform-specific)

 error-train-errtype = 0x0
 error-train-queue-time = 0x3211c5ea0

Failed to open /persist/ereports/ereports.lastlog. Ereport log may not exist.
bash-2.05b#

bash-2.05b# envtest -h

This command tests the Environmental Subsystem of the Service Processor.

Usage: envtest [-v] [led=enable|disable] [fan=enable|disable] [status=enable|disable]

Options Available:
led=enable|disable Enable or Disable led test (default enabled).
fan=enable|disable Enable or Disable fan test (default enabled).
status=enable|disable Enable or Disable status check test (default enabled).
bash-2.05b# envtest -v led=enable fan=enable status=enable
Starting Environmental Subsystem Test (envtest)…
Starting Led Headlights Test…
/SYS/PM0/CMP0/BOB0/CH0/D0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM0/CMP0/BOB0/CH1/D0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM0/CMP0/BOB1/CH0/D0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM0/CMP0/BOB1/CH1/D0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM0/CMP0/BOB2/CH0/D0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM0/CMP0/BOB2/CH1/D0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM0/CMP0/BOB3/CH0/D0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM0/CMP0/BOB3/CH1/D0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM0/CMP1/BOB0/CH0/D0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM0/CMP1/BOB0/CH1/D0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM0/CMP1/BOB1/CH0/D0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM0/CMP1/BOB1/CH1/D0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM0/CMP1/BOB2/CH0/D0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM0/CMP1/BOB2/CH1/D0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM0/CMP1/BOB3/CH0/D0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM0/CMP1/BOB3/CH1/D0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM1/CMP0/BOB0/CH0/D0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM1/CMP0/BOB0/CH1/D0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM1/CMP0/BOB1/CH0/D0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM1/CMP0/BOB1/CH1/D0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM1/CMP0/BOB2/CH0/D0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM1/CMP0/BOB2/CH1/D0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM1/CMP0/BOB3/CH0/D0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM1/CMP0/BOB3/CH1/D0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM1/CMP1/BOB0/CH0/D0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM1/CMP1/BOB0/CH1/D0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM1/CMP1/BOB1/CH0/D0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM1/CMP1/BOB1/CH1/D0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM1/CMP1/BOB2/CH0/D0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM1/CMP1/BOB2/CH1/D0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM1/CMP1/BOB3/CH0/D0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM1/CMP1/BOB3/CH1/D0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM0/OK TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM0/OK2RM TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM1/OK TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM1/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/PM1/OK2RM TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/FM0/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/FM1/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/FM2/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/FM3/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/FM4/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/MB/HDD2/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/MB/HDD2/OK2RM TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/MB/HDD3/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/MB/HDD3/OK2RM TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/MB/HDD4/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/MB/HDD4/OK2RM TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/MB/HDD5/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/MB/HDD5/OK2RM TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/OK TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/LOCATE TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/SP_OK TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/SP_FAULT TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/TEMP_FAULT TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/FAN_FAULT TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/MB/OK TURN_ON_SUCCESS TURN_OFF_SUCCESS
/SYS/MB/SERVICE TURN_ON_SUCCESS TURN_OFF_SUCCESS
Led Headlights Test PASSED
Starting Environmental Status Check Test…
System Temperatures Status Check…
/SYS/PM0/DVRM_CMP0/T_EXT Status: OK Temp: 39 (Celsius)
/SYS/PM0/DVRM_CMP1/T_EXT Status: OK Temp: 40 (Celsius)
/SYS/PM1/DVRM_CMP0/T_EXT Status: OK Temp: 39 (Celsius)
/SYS/PM1/DVRM_CMP1/T_EXT Status: OK Temp: 42 (Celsius)
/SYS/PM0/DVRM_CMP0/T_INT Status: OK Temp: 46 (Celsius)
/SYS/PM0/DVRM_CMP1/T_INT Status: OK Temp: 45 (Celsius)
/SYS/PM1/DVRM_CMP0/T_INT Status: OK Temp: 43 (Celsius)
/SYS/PM1/DVRM_CMP1/T_INT Status: OK Temp: 45 (Celsius)
/SYS/PM0/DVRM_CMP0/TEMP_FAULT Status: OK
/SYS/PM0/DVRM_CMP1/TEMP_FAULT Status: OK
/SYS/PM1/DVRM_CMP0/TEMP_FAULT Status: OK
/SYS/PM1/DVRM_CMP1/TEMP_FAULT Status: OK
/SYS/PM0/CMP0/DVRM_M0/T_EXT Status: OK Temp: 37 (Celsius)
/SYS/PM0/CMP0/DVRM_M1/T_EXT Status: OK Temp: 33 (Celsius)
/SYS/PM0/CMP1/DVRM_M0/T_EXT Status: OK Temp: 31 (Celsius)
/SYS/PM0/CMP1/DVRM_M1/T_EXT Status: OK Temp: 36 (Celsius)
/SYS/PM0/CMP0/DVRM_M0/T_INT Status: OK Temp: 39 (Celsius)
/SYS/PM0/CMP0/DVRM_M1/T_INT Status: OK Temp: 37 (Celsius)
/SYS/PM0/CMP1/DVRM_M0/T_INT Status: OK Temp: 41 (Celsius)
/SYS/PM0/CMP1/DVRM_M1/T_INT Status: OK Temp: 40 (Celsius)
/SYS/PM0/CMP0/DVRM_M0/TEMP_FAULT Status: OK
/SYS/PM0/CMP0/DVRM_M1/TEMP_FAULT Status: OK
/SYS/PM0/CMP1/DVRM_M0/TEMP_FAULT Status: OK
/SYS/PM0/CMP1/DVRM_M1/TEMP_FAULT Status: OK
/SYS/PM1/CMP0/DVRM_M0/T_EXT Status: OK Temp: 37 (Celsius)
/SYS/PM1/CMP0/DVRM_M1/T_EXT Status: OK Temp: 31 (Celsius)
/SYS/PM1/CMP1/DVRM_M0/T_EXT Status: OK Temp: 37 (Celsius)
/SYS/PM1/CMP1/DVRM_M1/T_EXT Status: OK Temp: 39 (Celsius)
/SYS/PM1/CMP0/DVRM_M0/T_INT Status: OK Temp: 36 (Celsius)
/SYS/PM1/CMP0/DVRM_M1/T_INT Status: OK Temp: 38 (Celsius)
/SYS/PM1/CMP1/DVRM_M0/T_INT Status: OK Temp: 39 (Celsius)
/SYS/PM1/CMP1/DVRM_M1/T_INT Status: OK Temp: 40 (Celsius)
/SYS/PM1/CMP0/DVRM_M0/TEMP_FAULT Status: OK
/SYS/PM1/CMP0/DVRM_M1/TEMP_FAULT Status: OK
/SYS/PM1/CMP1/DVRM_M0/TEMP_FAULT Status: OK
/SYS/PM1/CMP1/DVRM_M1/TEMP_FAULT Status: OK
/SYS/PM0/CMP0/BOB0/CH0/D0/T_AMB Status: OK Temp: 33 (Celsius)
/SYS/PM0/CMP0/BOB0/CH1/D0/T_AMB Status: OK Temp: 36 (Celsius)
/SYS/PM0/CMP0/BOB1/CH0/D0/T_AMB Status: OK Temp: 33 (Celsius)
/SYS/PM0/CMP0/BOB1/CH1/D0/T_AMB Status: OK Temp: 33 (Celsius)
/SYS/PM0/CMP0/BOB2/CH0/D0/T_AMB Status: OK Temp: 32 (Celsius)
/SYS/PM0/CMP0/BOB2/CH1/D0/T_AMB Status: OK Temp: 32 (Celsius)
/SYS/PM0/CMP0/BOB3/CH0/D0/T_AMB Status: OK Temp: 33 (Celsius)
/SYS/PM0/CMP0/BOB3/CH1/D0/T_AMB Status: OK Temp: 35 (Celsius)
/SYS/PM0/CMP1/BOB0/CH0/D0/T_AMB Status: OK Temp: 36 (Celsius)
/SYS/PM0/CMP1/BOB0/CH1/D0/T_AMB Status: OK Temp: 37 (Celsius)
/SYS/PM0/CMP1/BOB1/CH0/D0/T_AMB Status: OK Temp: 34 (Celsius)
/SYS/PM0/CMP1/BOB1/CH1/D0/T_AMB Status: OK Temp: 34 (Celsius)
/SYS/PM0/CMP1/BOB2/CH0/D0/T_AMB Status: OK Temp: 33 (Celsius)
/SYS/PM0/CMP1/BOB2/CH1/D0/T_AMB Status: OK Temp: 34 (Celsius)
/SYS/PM0/CMP1/BOB3/CH0/D0/T_AMB Status: OK Temp: 35 (Celsius)
/SYS/PM0/CMP1/BOB3/CH1/D0/T_AMB Status: OK Temp: 38 (Celsius)
/SYS/PM1/CMP0/BOB0/CH0/D0/T_AMB Status: OK Temp: 35 (Celsius)
/SYS/PM1/CMP0/BOB0/CH1/D0/T_AMB Status: OK Temp: 37 (Celsius)
/SYS/PM1/CMP0/BOB1/CH0/D0/T_AMB Status: OK Temp: 34 (Celsius)
/SYS/PM1/CMP0/BOB1/CH1/D0/T_AMB Status: OK Temp: 34 (Celsius)
/SYS/PM1/CMP0/BOB2/CH0/D0/T_AMB Status: OK Temp: 33 (Celsius)
/SYS/PM1/CMP0/BOB2/CH1/D0/T_AMB Status: OK Temp: 33 (Celsius)
/SYS/PM1/CMP0/BOB3/CH0/D0/T_AMB Status: OK Temp: 35 (Celsius)
/SYS/PM1/CMP0/BOB3/CH1/D0/T_AMB Status: OK Temp: 36 (Celsius)
/SYS/PM1/CMP1/BOB0/CH0/D0/T_AMB Status: OK Temp: 36 (Celsius)
/SYS/PM1/CMP1/BOB0/CH1/D0/T_AMB Status: OK Temp: 37 (Celsius)
/SYS/PM1/CMP1/BOB1/CH0/D0/T_AMB Status: OK Temp: 35 (Celsius)
/SYS/PM1/CMP1/BOB1/CH1/D0/T_AMB Status: OK Temp: 35 (Celsius)
/SYS/PM1/CMP1/BOB2/CH0/D0/T_AMB Status: OK Temp: 35 (Celsius)
/SYS/PM1/CMP1/BOB2/CH1/D0/T_AMB Status: OK Temp: 35 (Celsius)
/SYS/PM1/CMP1/BOB3/CH0/D0/T_AMB Status: OK Temp: 36 (Celsius)
/SYS/PM1/CMP1/BOB3/CH1/D0/T_AMB Status: OK Temp: 38 (Celsius)
/SYS/PM0/CMP0/T_TCORE Status: OK Temp: 52 (Celsius)
/SYS/PM0/CMP0/T_BCORE Status: OK Temp: 56 (Celsius)
/SYS/PM0/CMP1/T_TCORE Status: OK Temp: 54 (Celsius)
/SYS/PM0/CMP1/T_BCORE Status: OK Temp: 54 (Celsius)
/SYS/PM1/CMP0/T_TCORE Status: OK Temp: 55 (Celsius)
/SYS/PM1/CMP0/T_BCORE Status: OK Temp: 58 (Celsius)
/SYS/PM1/CMP1/T_TCORE Status: OK Temp: 54 (Celsius)
/SYS/PM1/CMP1/T_BCORE Status: OK Temp: 55 (Celsius)
/SYS/PM0/T_INLET Status: OK Temp: 16 (Celsius)
/SYS/PM1/T_INLET Status: OK Temp: 16 (Celsius)
/SYS/T_AMB Status: OK Temp: 16 (Celsius)
/SYS/MB/T_INLET Status: OK Temp: 32 (Celsius)
/SYS/PS0/T_AMB Status: OK Temp: 26 (Celsius)
/SYS/PS1/T_AMB Status: OK Temp: 26 (Celsius)
/SYS/PS2/T_AMB Status: OK Temp: 23 (Celsius)
/SYS/PS3/T_AMB Status: OK Temp: 23 (Celsius)
/SYS/RIO/T_OUTLET Status: OK Temp: 35 (Celsius)
System Temperatures Status Check PASSED
Power Supplies Status Check…
Power Supply (PS0): OK
Power Supply (PS1): OK
Power Supply (PS2): OK
Power Supply (PS3): OK
Power Supplies Status Check PASSED
Voltage Rails Status Check…
/SYS/PM0/DVRM_CMP0/V_VCORE : Status: OK
/SYS/PM0/DVRM_CMP1/V_VCORE : Status: OK
/SYS/PM1/DVRM_CMP0/V_VCORE : Status: OK
/SYS/PM1/DVRM_CMP1/V_VCORE : Status: OK
/SYS/PM0/DVRM_CMP0/OV_FAULT : Status: OK
/SYS/PM0/DVRM_CMP1/OV_FAULT : Status: OK
/SYS/PM1/DVRM_CMP0/OV_FAULT : Status: OK
/SYS/PM1/DVRM_CMP1/OV_FAULT : Status: OK
/SYS/PM0/DVRM_CMP0/IUV_FAULT : Status: OK
/SYS/PM0/DVRM_CMP1/IUV_FAULT : Status: OK
/SYS/PM1/DVRM_CMP0/IUV_FAULT : Status: OK
/SYS/PM1/DVRM_CMP1/IUV_FAULT : Status: OK
/SYS/PM0/DVRM_CMP0/OOV_FAULT : Status: OK
/SYS/PM0/DVRM_CMP1/OOV_FAULT : Status: OK
/SYS/