lightGBM gpu环境配置

推荐先看一手官方的Installation Guide.我用的是ubuntu 16.04,一些要求如下图:

 

 

 主要是OpenCL以及libboost两个环境的要求.

(1) OpenCL的安装.我这里之前安装了NVIDA-395的驱动以及CUDA 9.0,只需要在编译的时候给出对应的path就可以了(这部分后面编译的时候会有解释).可以用clinfo查看OpenCL的信息.

Lenovo-Rescuer-15ISK:~$ clinfo
Number of platforms                               1
  Platform Name                                   NVIDIA CUDA
  Platform Vendor                                 NVIDIA Corporation
  Platform Version                                OpenCL 1.2 CUDA 9.1.84
  Platform Profile                                FULL_PROFILE
  Platform Extensions                             cl_khr_global_int32_base_atomics cl_khr_global_int32_extended_atomics cl_khr_local_int32_base_atomics cl_khr_local_int32_extended_atomics cl_khr_fp64 cl_khr_byte_addressable_store cl_khr_icd cl_khr_gl_sharing cl_nv_compiler_options cl_nv_device_attribute_query cl_nv_pragma_unroll cl_nv_copy_opts cl_nv_create_buffer
  Platform Extensions function suffix             NV

  Platform Name                                   NVIDIA CUDA
Number of devices                                 1
  Device Name                                     GeForce GTX 960M
  Device Vendor                                   NVIDIA Corporation
  Device Vendor ID                                0x10de
  Device Version                                  OpenCL 1.2 CUDA
  Driver Version                                  390.87
  Device OpenCL C Version                         OpenCL C 1.2 

(2)libboost安装.

> 从https://dl.bintray.com/boostorg/release/1.69.0/source/boost_1_69_0.tar.gz下载对应的压缩包

> 解压缩 tar -xzvf boost_1_69_0.tar.gz

> 切换到对应的文件目录下 sudo ./bootstrap.sh

> 根据提示 sudo ./b2 install 这样头文件就被默认安装在/usr/local/include头文件下，库文件就被默认安装在/usr/local/lib下

上述两个依赖搞定之后,安装官方给的安装方式(linux)如下:

git clone --recursive https://github.com/microsoft/LightGBM ; cd LightGBM
mkdir build ; cd build
cmake -DUSE_GPU=1 ..
# if you have installed NVIDIA CUDA to a customized location, you should specify paths to OpenCL headers and library like the following:
# cmake -DUSE_GPU=1 -DOpenCL_LIBRARY=/usr/local/cuda/lib64/libOpenCL.so -DOpenCL_INCLUDE_DIR=/usr/local/cuda/include/ ..
make -j4

注意,如果已经安装过cuda的要指出OpenCL所在的位置,之后正常编译就好了.

 

 

 

 　　

 

转载于:https://www.cnblogs.com/z1141000271/p/11510776.html