gcc:
-c 编译后汇编,不连接
-S 编译后停止,不进行汇编
-o 编译,汇编,连接
-g 生成调试信息
-gstabs
标识符 main
gdb
break *标识符 :设置断点
info register :参看寄存器
run :运行
list :列出函数行
objdump:
一般常用的是
objdump -x 显示文件头信息
objdump -d 反汇编代码段代码
objdump -D 反汇编所有代码
用法:objdump <选项> <文件>
显示来自目标 <文件> 的信息。
至少必须给出以下选项之一:
-a, –archive-headers Display archive header information
-f, –file-headers Display the contents of the overall file header
-p, –private-headers Display object format specific file header contents
-P, –private=OPT,OPT… Display object format specific contents
-h, –[section-]headers Display the contents of the section headers
-x, –all-headers Display the contents of all headers 显示头信息
-d, –disassemble Display assembler contents of executable sections 显示代码段代码
-D, –disassemble-all Display assembler contents of all sections 显示所有段代码
-S, –source Intermix source code with disassembly
-s, –full-contents Display the full contents of all sections requested
-g, –debugging Display debug information in object file
-e, –debugging-tags Display debug information using ctags style
-G, –stabs Display (in raw form) any STABS info in the file
-W[lLiaprmfFsoRt] or
–dwarf[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,
=frames-interp,=str,=loc,=Ranges,=pubtypes,
=gdb_index,=trace_info,=trace_abbrev,=trace_aranges,
=addr,=cu_index]
Display DWARF info in the file
-t, –syms Display the contents of the symbol table(s)
-T, –dynamic-syms Display the contents of the dynamic symbol table
-r, –reloc Display the relocation entries in the file
-R, –dynamic-reloc Display the dynamic relocation entries in the file
@ Read options from
-v, –version Display this program’s version number
-i, –info List object formats and architectures supported
-H, –help Display this information
以下选项是可选的:
-b, –target=BFDNAME 将标的目标文件格式指定为 BFDNAME
-m, –architecture=MACHINE 将标的体系结构指定为 MACHINE
-j, –section=NAME 只显示 NAME 节的信息
-M, –disassembler-options=OPT 将文本传递到 OPT 反汇编程序
-EB –endian=big 反汇编时假定高位字节在前
-EL –endian=little 反汇编时假定低位字节在前
–file-start-context 从文件的起点引入上下文 (带有 -S)
-l, –line-numbers 在输出中给出行号和文件名
-C, –demangle[=STYLE] 对修饰过的 (mangled) 符号名进行解码
如果给出了 STYLE,STYLE 可能为“auto”、“gnu”、
“lucid”、“arm”、“hp”、“edg”或“gnu-new-abi”
-w, –wide 以多于 80 列的宽度对输出进行格式化
-z, –disassemble-zeroes 反汇编时不要跳过为零的块
–start-address=ADDR 只有进程数据的地址 >= ADDR
–stop-address=ADDR 只有进程数据的地址 <= ADDR
–prefix-addresses 同反汇编代码并列显示完整的地址
–[no-]show-raw-insn 同符号反汇编并列显示十六进制值
–adjust-vma=OFFSET 为所有显示的节地址增加 OFFSET
--dwarf-depth=N Do not display DIEs at depth N or greater
--dwarf-start=N Display DIEs starting with N, at the same depth
or deeper
--dwarf-check Make additional dwarf internal consistency checks.
objdump:支持的目标: elf64-x86-64 elf32-i386 elf32-iamcu elf32-x86-64 a.out-i386-linux pei-i386 pei-x86-64 elf64-l1om elf64-k1om elf64-little elf64-big elf32-little elf32-big plugin srec symbolsrec verilog tekhex binary ihex
objdump:支持的体系结构: i386 i386:x86-64 i386:x64-32 i8086 i386:intel i386:x86-64:intel i386:x64-32:intel i386:nacl i386:x86-64:nacl i386:x64-32:nacl iamcu iamcu:intel l1om l1om:intel k1om k1om:intel plugin
下列 i386/x86-64 特定的反汇编器选项在使用 -M 开关时可用(使用逗号分隔多个选项):
x86-64 Disassemble in 64bit mode
i386 Disassemble in 32bit mode
i8086 在 16 位模式下反汇编
att 用 AT&T 语法显示指令
intel 用 Intel 语法显示指令
att-mnemonic
Display instruction in AT&T mnemonic
intel-mnemonic
Display instruction in Intel mnemonic
addr64 假定 64 位地址大小
addr32 假定 32 位地址大小
addr16 假定 16 位地址大小
data32 假定 32 位数据大小
data16 假定 16 位数据大小
suffix 在 AT&T 语法中始终显示指令后缀
amd64 Display instruction in AMD64 ISA
intel64 Display instruction in Intel64 ISA