FIO文件从一台linux copy到另一台

1. 在一台linux上面装好fio

2. 在目标主机做以下设定

$ ifconfig eth0 up # Enable the first port on the internal NIC
$ udhcpc -i eth0 # Get an IP via DHCP
$ ifconfig eth1 | awk '/inet/ { print $2 }' # Show the IP address

$ mount -o remount,rw /
$ ln -s /var/etc/resolv.conf /etc/resolv.conf

3. 将linux server上所以fio文件copy到u盘

fio files in Linux Server:

/usr/local/bin/fio

/usr/local/bin/fio_generate_plots

/usr/local/bin/fio2gnuplot

/usr/local/bin/genfio

4. 将linux server上lib64下面的一些文件copy到u盘

cp /usr/lib64/lib{ibverbs.so.*,nl-3.so.*,nl-route-3.so.*,nspr4.so,nss3.so,nssutil3.so,numa.so.*,plc4.so,plds4.so,pmem*,rados.so.*,rbd.so.*,rdmacm.so.*,smime3.so,ssl3.so}

/usb path

5. 在目标主机将以下文件通过u盘活网络copy过来

$ scp /usr/bin/fio root@<IP>:/usr/bin
$ scp scp /usr/lib64/lib{ibverbs.so.*,nl-3.so.*,nl-route-3.so.*,nspr4.so,nss3.so,nssutil3.so,numa.so.*,plc4.so,plds4.so,pmem*,rados.so.*,rbd.so.*,rdmacm.so.*,smime3.so,ssl3.so} root@<IP>:/usr/lib64