WLAM(无线局域网),家庭版无线设备及企业AP，怎么办？

1、WLAM的介绍

2、家庭版的WIFI调试方式

3、企业AP使用方式

    一、为什么我们离不开WLAM，WLAN广义上是指以无线电波、激光、红外线等无线信号来代替有线局域网中的部分或全部传输介质所构成的网络。

   二、不同家庭版的WIFI配置界面不同，但是配置方式都是一样的。

         (1)上电之后，观察是否有新的wifi出现，一般设备的背面有标识，检查SSID及管理地址或者网址（登录配置界面）
         (2)常见的wifi路由器把wan  lan  接口分的清晰，但是也有不仅可以做WAN也可以做LAN的型号设备。
         (3)登录配置界面，常规配置上网方式选择dhcp  PPPOE 静态根据实际选择，设置WIFI名称（SSID）及密码即可实现上网。

     三、企业常用的AP接入方式

企业中常用的AC+AP等设备来实现AC旁挂接入、串行接入，下面使用旁挂接入测试。

配置信息：

[AC] dhcp enable
[AC] interface vlanif 100
[AC-Vlanif100] ip address 10.23.100.1 24
[AC-Vlanif100] dhcp select interface

[S2] dhcp enable
[S2] interface vlanif 101
[S2-Vlanif101] ip address 10.23.101.1 24
[S2-Vlanif101] dhcp select interface

S1配置：
[S1] vlan batch 100
[S1] interface gigabitethernet 0/0/1
[S1-GigabitEthernet0/0/1] port link-type trunk
[S1-GigabitEthernet0/0/1] port trunk pvid vlan 100
[S1-GigabitEthernet0/0/1] port trunk allow-pass vlan 100
[S1-GigabitEthernet0/0/1] quit
[S1] interface gigabitethernet 0/0/2
[S1-GigabitEthernet0/0/2] port link-type trunk
[S1-GigabitEthernet0/0/2] port trunk allow-pass vlan 100
[S1-GigabitEthernet0/0/2] quit

S2配置：
[S2] vlan batch 100 101
[S2] interface gigabitethernet 0/0/1
[S2-GigabitEthernet0/0/1] port link-type trunk
[S2-GigabitEthernet0/0/1] port trunk allow-pass vlan 100
[S2-GigabitEthernet0/0/1] quit
[S2] interface gigabitethernet 0/0/2
[S2-GigabitEthernet0/0/2] port link-type trunk
[S2-GigabitEthernet0/0/2] port trunk allow-pass vlan 100 101
[S2-GigabitEthernet0/0/2] quit
[S2] interface gigabitethernet 0/0/3
[S2-GigabitEthernet0/0/3] port link-type trunk
[S2-GigabitEthernet0/0/3] port trunk allow-pass vlan 101
[S2-GigabitEthernet0/0/3] quit

▫ AC配置
[AC] vlan batch 100 101
[AC] interface gigabitethernet 0/0/1
[AC-GigabitEthernet0/0/1] port link-type trunk
[AC-GigabitEthernet0/0/1] port trunk allow-pass vlan 100 101
[AC-GigabitEthernet0/0/1] quit

[AC] wlan
[AC-wlan-view] ap-group name ap-group1
[AC-wlan-ap-group-ap-group1] quit

AC-wlan-view] regulatory-domain-profile name default
[AC-wlan-regulate-domain-default] country-code cn
[AC-wlan-regulate-domain-default] quit
[AC-wlan-view] ap-group name ap-group1
[AC-wlan-ap-group-ap-group1] regulatory-domain-profile default
Warning: Modifying the country code will clear channel, power and 
antenna gain configurations of the radio and reset the AP. Continu
e?[Y/N]:y 
[AC-wlan-ap-group-ap-group1] quit
[AC-wlan-view] quit

[AC] capwap source interface vlanif 100

[AC] wlan
[AC-wlan-view] ap auth-mode mac-auth
[AC-wlan-view] ap-id 0 ap-mac 60de-4476-e360
[AC-wlan-ap-0] ap-name area_1
Warning: This operation may cause AP reset. Continue? [Y/N]:y 
[AC-wlan-ap-0] ap-group ap-group1
Warning: This operation may cause AP reset. If the country code 
changes, it will clear channel, power and antenna gain 
configurations of the radio, Whether to continue? [Y/N]:y 
[AC-wlan-ap-0] quit

[AC-wlan-view] security-profile name wlan-net
[AC-wlan-sec-prof-wlan-net] security wpa-wpa2 psk pass-phrase 
a1234567 aes
[AC-wlan-sec-prof-wlan-net] quit

[AC-wlan-view] ssid-profile name wlan-net
[AC-wlan-ssid-prof-wlan-net] ssid wlan-net
[AC-wlan-ssid-prof-wlan-net] quit

[AC-wlan-view] vap-profile name wlan-net
[AC-wlan-vap-prof-wlan-net] forward-mode tunnel    //转发模式为隧道模式
[AC-wlan-vap-prof-wlan-net] service-vlan vlan-id 101
[AC-wlan-vap-prof-wlan-net] security-profile wlan-net
[AC-wlan-vap-prof-wlan-net] ssid-profile wlan-net
[AC-wlan-vap-prof-wlan-net] quit

[AC-wlan-view] ap-group name ap-group1
[AC-wlan-ap-group-ap-group1] vap-profile wlan-net wlan 1 radio 0
[AC-wlan-ap-group-ap-group1] vap-profile wlan-net wlan 1 radio 1
[AC-wlan-ap-group-ap-group1] quit

转发模式的区别，可以参考无线基础知识：直接转发和隧道转发有何区别？ - 知乎