K-Touch W700刷机失败



Fri, November 18, 2011:  18:17.47 PM  ======[nvflash_main] Context ---> 0x12ed98 ,



Fri, November 18, 2011:  18:17.47 PM  
======nvflash_dispatch -- ConfigFile : D:\k-touch_w700\SunnyKale-w700-rom\flash.cfg


Fri, November 18, 2011:  18:17.47 PM  
======nvflash_dispatch -- BctFile : D:\k-touch_w700\SunnyKale-w700-rom\flash.bct


Fri, November 18, 2011:  18:17.47 PM  
======nvflash_dispatch -- bootloader_file : D:\k-touch_w700\SunnyKale-w700-rom\bootloader.bin


Fri, November 18, 2011:  18:17.47 PM  
 ====== nvflash_configfile --D:\k-touch_w700\SunnyKale-w700-rom\flash.cfg


Fri, November 18, 2011:  18:17.47 PM  
 ====== nvflash_configfile --NvFlashConfigFileParse ok


Fri, November 18, 2011:  18:17.47 PM  
 ====== nvflash_configfile --NvFlashConfigListDevices ok


Fri, November 18, 2011:  18:17.47 PM  
Fri, November 18, 2011:  18:17.47 PM     dk burned: false


Fri, November 18, 2011:  18:17.47 PM     boot device: emmc


Fri, November 18, 2011:  18:17.47 PM  sending file: D:\k-touch_w700\SunnyKale-w700-rom\flash.bct


Fri, November 18, 2011:  18:17.47 PM  load address: 0x108000 entry point: 0x108000


Fri, November 18, 2011:  18:17.47 PM  sending file: D:\k-touch_w700\SunnyKale-w700-rom\bootloader.bin


Fri, November 18, 2011:  18:17.48 PM  waiting for bootloader to initialize


Fri, November 18, 2011:  18:17.49 PM  bootloader downloaded successfully


Fri, November 18, 2011:  18:17.49 PM  
======nvflash_cmd_create -- 


Fri, November 18, 2011:  18:17.49 PM  
======nvflash_cmd_create -- Nv3pCommand_StartPartitionConfiguration


Fri, November 18, 2011:  18:17.49 PM  setting device: 2 3


Fri, November 18, 2011:  18:17.49 PM  Creating partition: BCT


Fri, November 18, 2011:  18:17.49 PM  ======[nvflash_cmd_create] Fail : CreatePartition failure


Fri, November 18, 2011:  18:17.49 PM  command failure: create failed
Fri, November 18, 2011:  18:17.49 PM  command failure: bad data
Fri, November 18, 2011:  18:17.50 PM  bootloader status: failed to create the partition (code: 10) message: nverror:0x42008 (0x6042008) flags: 0


Fri, November 18, 2011:  18:17.50 PM  ======[nvflash_main] Fail :(


然后机器就显示

 


网上搜了一下也有人碰到同样的问题


http://www.592zn.net/viewthread.php?action=printable&tid=139532


我将手机电池拆下来放了一个周末,再把电池装回去,奇迹出现了,W700又能够正常启动了。不过不稳定,很容易死机,死机之后直接拔电池不能马上启动,还要将电池取下来放一段时间,可能是需要放电,才能将机器恢复到正常状态。是不是我装了什么软件导致死机,还需要进一步确认一下。



阅读更多
换一批

没有更多推荐了,返回首页