You travel a lot by bus and the costs of all the seperate tickets are starting to add up.
Therefore you want to see if it might be advantageous for you to buy a bus pass.
The way the bus system works in your country (and also in the Netherlands) is as follows:
when you buy a bus pass, you have to indicate a center zone and a star value. You are allowed to travel freely in any zone which has a distance to your center zone which is less than your star value. For example, if you have a star value of one, you can only travel in your center zone. If you have a star value of two, you can also travel in all adjacent zones, et cetera.
You have a list of all bus trips you frequently make, and would like to determine the minimum star value you need to make all these trips using your buss pass. But this is not always an easy task. For example look at the following figure:
![](http://acm.zju.edu.cn/onlinejudge/showImage.do?name=0000%2F2913%2FBus_Pass_1.jpg)
Input
On the first line an integert(1 <=t<= 100): the number of test cases. Then for each test case:
One line with two integersnz(2 <=nz<= 9 999) andnr(1 <=nr<= 10): the number of zones and the number of bus trips, respectively.
nz lines starting with two integers idi (1 <= idi <= 9 999) and mzi (1 <= mzi <= 10), a number identifying the i-th zone and the number of zones adjacent to it, followed by mzi integers: the numbers of the adjacent zones.
nr lines starting with one integer mri (1 <= mri <= 20), indicating the number of zones the ith bus trip visits, followed by mri integers: the numbers of the zones through which the bus passes in the order in which they are visited.
All zones are connected, either directly or via other zones.
Output
For each test case:
One line with two integers, the minimum star value and the id of a center zone which achieves this minimum star value. If there are multiple possibilities, choose the zone with the lowest number.
Sample Input
1
17 2
7400 6 7401 7402 7403 7404 7405 7406
7401 6 7412 7402 7400 7406 7410 7411
7402 5 7412 7403 7400 7401 7411
7403 6 7413 7414 7404 7400 7402 7412
7404 5 7403 7414 7415 7405 7400
7405 6 7404 7415 7407 7408 7406 7400
7406 7 7400 7405 7407 7408 7409 7410 7401
7407 4 7408 7406 7405 7415
7408 4 7409 7406 7405 7407
7409 3 7410 7406 7408
7410 4 7411 7401 7406 7409
7411 5 7416 7412 7402 7401 7410
7412 6 7416 7411 7401 7402 7403 7413
7413 3 7412 7403 7414
7414 3 7413 7403 7404
7415 3 7404 7405 7407
7416 2 7411 7412
5 7409 7408 7407 7405 7415
6 7415 7404 7414 7413 7412 7416
Sample Output
4 7400
#include<iostream>
#include<cstdio>
#include<vector>
#include<queue>
#include<cstring>
#include<algorithm>
#define Maxn 10010
using namespace std;
vector<int> Map[Maxn];
queue<int> que[2];
int reach[Maxn]; //单个点访问次数记录
int ans[Maxn]; //记录某个区域到线路所有区域最大距离
int cur; //cur为当前已访问区域数量
void BFS(int zone)
{
int a=0,b=1,val=1; //val表示距离
if(reach[zone]<cur){ //未访问
reach[zone]=cur;
que[a].push(zone);
ans[zone]=max(ans[zone],val); //更新最大值
}
while(!que[a].empty()) {
swap(a,b);
val++; //深一层
while(!que[b].empty()){
int att=que[b].front();
que[b].pop();
for(vector<int>::iterator it=Map[att].begin();it!=Map[att].end();it++){
if(reach[*it]<cur){ //未访问
reach[*it]=cur;
que[a].push(*it);
ans[*it]=max(ans[*it],val); //更新最大值
}
}
}
}
}
int main()
{
int t;
int nz,nr,mr; //nz为区域数,nr为路线数,mr为每条线路的区域数
int id,mz,zone; //id为区号,mz为相邻区域数
int MIN,index; //MIN为最小距离,index为最小区域号
cin>>t;
while(t--){
cur=0;
memset(reach,-1,sizeof(reach));
memset(ans,0,sizeof(ans));
scanf("%d%d",&nz,&nr);
for(int i=0;i<nz;i++){ //构造邻接表
scanf("%d%d",&id,&mz);
Map[id].clear();
for(int j=0;j<mz;j++){
scanf("%d",&zone);
Map[id].push_back(zone);
}
}
for(int i=0;i<nr;i++){
scanf("%d",&mr);
for(int j=0;j<mr;j++){
scanf("%d",&zone);
BFS(zone);
cur++;
}
}
int MIN=0x3f3f3f3f;
for(int i=0;i<Maxn;i++)
if(reach[i]==cur-1&&ans[i]<MIN){
MIN=ans[i];
index=i;
}
printf("%d %d\n",MIN,index);
}
return 0;
}
非STL版:
#include<cstdio>
#include<iostream>
#include<cstring>
#define Maxn 10010
using namespace std;
int head[Maxn],next[Maxn*50];
int cnt[Maxn],ct[Maxn],q[2][Maxn],a[Maxn*10];
void bfs(int x,int cou){
int pa=0,pb=1,step=0;
int s1=0,e1=-1,s2,e2;
q[pa][++e1]=x;
ct[x]=cou;
while(s1<=e1){
step++;
s2=s1,e2=e1;
s1=0,e1=-1;
pa^=1,pb^=1;
while(s2<=e2){
int t=q[pb][s2++];
cnt[t]=step>cnt[t]?step:cnt[t];
for(int i=head[t];i!=-1;i=next[i])
if(ct[a[i]]!=cou){
q[pa][++e1]=a[i];
ct[a[i]]=cou;
}
}
}
}
int main()
{
int t,n,m,b,k,id;
scanf("%d",&t);
while(t--){
scanf("%d%d",&n,&m);
memset(head,-1,sizeof head);
memset(cnt,0,sizeof cnt);
memset(ct,0,sizeof ct);
int tot=-1;
for(int i=0;i<n;i++){
scanf("%d%d",&id,&k);
while(k--){
scanf("%d",&a[++tot]);
next[tot]=head[id];
head[id]=tot;
}
}
int cou=0;
for(int i=0;i<m;i++){
scanf("%d",&k);
while(k--){
scanf("%d",&b);
bfs(b,++cou);
}
}
int ans=1<<30;
for(int i=1;i<=9999;i++)
if(cnt[i]&&cnt[i]<ans){
ans=cnt[i];
id=i;
}
printf("%d %d\n",ans,id);
}
return 0;
}
依赖STL总不是一件好事,但自己写有个麻烦,next和a数组要开大,具体多大,取决于题目规模,可能会RE。