wince5.0 config.bib之128M SDRAM 修改

一、这个在4.2和5.0我想都必须on才行

AUTOSIZE

Send Feedback on this topic to the authors

See Also

CONFIG Section

Developing an Operating System > Build System > OS Design Configuration Files > Run-Time Image Configuration Files > Binary Image Builder File > CONFIG Section

For run-time images in RAM: This configuration option allows all unused run-time image RAM to be used as system RAM and object store RAM without modification of the .bib memory parameters. This configuration option can also be used to take more memory from the RAM section and provide it to the RAMIMAGE section.

This option uses the following syntax:

AUTOSIZE = OFF | ON 

Parameters

OFF

By default, Romimage.exe does not combine unused run-time image RAM.

ON

Romimage.exe combines the RAM and run-time image memory regions into one region, with the run-time image filled from the lowest address to the highest. The RAM parameters in the table of contents are modified to allow the system to use all remaining RAM.

See Also

 

 

===================================================

This configuration option specifies the size of the ROM.

This option uses the following syntax.

ROMSIZE = size

Parameters

size

The size, in bytes, of the ROM.

Remarks

This configuration option, along with ROMSTART and ROMWIDTH, defines the .abx data format.

The following code example shows how a CONFIG section can use configuration options to define the .abx format for a 4-MB target device.

ROMSTART=80000000 
ROMSIZE=400000  
ROMWIDTH=32 

In this example, Romimage.exe creates one 4-MB absolute binary data format file with extension .ab0.

CONFIG Section

==================================================================