Display interface的显示信息
本次工作希望统一Ethernet接口的信息,建议如下:
[1] GigabitEthernet3/0/1 current state : DOWN
[2] IP Sending Frames Format is PKTFMT_ETHNT_2, Hardware address is 00e0-fc00-0010
[3] The Maximum Tra <script language="javascript" src="/CMS/JS/newsad.js" type="text/javascript"></script> nsmit Unit is 1500
[4] Media type is not sure, loopback not set
[5] Port hardware type is No Connector
[6] Unknown-speed mode, unknown-duplex mode
[7] Link speed type is autonegotiation, link duplex type is autonegotiation
[8] Flow-control is not supported
[9] The Maximum Frame Length is 1536
[10] Broadcast MAX-ratio: 100%
[11] Allow jumbo frame to pass
[12] PVID: 1
[13] Port link-type: access
[14] Tagged VLAN ID : none
[15] Untagged VLAN ID : 504
[16] Last 5 minutes input rate 229 bytes/sec, 2 packets/sec
Last 5 minutes output rate 25 bytes/sec, 0 packets/sec
[17] Input(total): 34764 packets, 14212713 bytes
1021 broadcasts, 0 multicasts, 0 pauses
[18] Input(normal): 34764 packets, 14212713 bytes
1021 broadcasts, 0 multicasts, 0 pauses
[19] Input(error): 0 input errors, 0 runts, 0 giants, 0 throttles, 0 CRC, 0 frame, 0 overruns,
0 aborts, 0 ignored, 0 parity errors
[20] Output(total): 1630514 packets, 52
华为Display interface的显示信息详解
最新推荐文章于 2024-07-31 14:53:27 发布
本文详述了华为Display interface显示的接口信息,包括接口状态、MAC地址、MTU、连接线类型、速度双工模式、流控、广播抑制比、PVID、VLAN设置以及输入输出速率和错误统计等关键参数。
摘要由CSDN通过智能技术生成