H3C-MSR830版本丢失（通过BootWare升级）

• 现象:console登陆后一直在BootWare界面，且指示灯sys灯黄灯常亮！除g0/0口其他以太网口无法up
• 判断：版本丢失
• 解决方法：命令行BootWare菜单下上传软件版本
• 准备工具
  • 网线一根
  • console线一根
  • MSR830版本包（官网下载，公用用户名：yx800 密钥：01230123）
  • tftp软件（软件不唯一，这里用TftpServer.exe）
• 步骤：将网线连接到路由器g0/0,console也要连接上
  • 电脑打开TftpServer.exe
• 
• 注意：版本包要和软件在同一个目录下如下：
• 
  • 用终端软件（secureCRT）登入

• • 路由器上电和重新启动的过程中，在配置终端的屏幕上首先将显示：

    ****************************************************************************

    * *

    * H3C MSR930 BootWare, Version 5.02 *

    * *

    ****************************************************************************

    Copyright (c) 2004-2014 Hangzhou H3C Technologies Co., Ltd.

     

    Compiled Date : Dec 8 2014

    CPU Type : P1010

    CPU L1 Cache : 32KB

    CPU L2 Cache : 256KB

    CPU Clock Speed : 533MHz

    Memory Type : DDR3 SDRAM

    Memory Size : 256MB

    Memory Speed : 667MHz

    BootWare Size : 1024KB

    Flash Size : 128MB

    CPLD Version : 1.0

    PCB Version : 3.0

     

     

    BootWare Validating...

    Press Ctrl+B to enter extended boot menu... //当系统出现“Press Ctrl+B to enter extended boot menu...”时，马上按下<Ctrl+B>

    BootWare password: Not required. Please press Enter to continue. //按Enter键系统进入BootWare主菜单

     

    Password recovery capability is enabled.

    Note: The current operating device is flash

    Enter < Storage Device Operation > to select device.

     

    ===========================<EXTEND-BOOTWARE MENU>===========================

    |<1> Boot System

    |<2> Enter Serial SubMenu

    |<3> Enter Ethernet SubMenu

    |<4> File Control

    |<5> Restore to Factory Default Configuration

    |<6> Skip Current System Configuration

    |<7> BootWare Operation Menu

    |<8> Clear Super Password

    |<9> Storage Device Operation

    |<0> Reboot

    ============================================

    Ctrl+Z: Access EXTEND-ASSISTANT MENU

    Ctrl+F: Format File System

    Ctrl+C: Display Copyright

    Enter your choice(0-9): 3 //在BootWare菜单下键入<3>，可以进入以太网口子菜单

     

    ==========================<Enter Ethernet SubMenu>==========================

    |Note:the operating device is flash

    |<1> Download Application Program To SDRAM And Run

    |<2> Update Main Application File

    |<3> Update Backup Application File

    |<4> Update Secure Application File

    |<5> Modify Ethernet Parameter

    |<0> Exit To Main Menu

    |<Ensure The Parameter Be Modified Before Downloading!>

    ============================================

    Enter your choice(0-5): 5 //键入<5>，修改以太网口参数

     

    ==========================<ETHERNET PARAMETER SET>==========================

    |Note: '.' = Clear field.

    | '-' = Go to previous field.

    | Ctrl+D = Quit.

    ============================================

    Protocol (FTP or TFTP) :ftp tftp //选择传输协议，根据实际情况选择，本案例使用tftp协议进行传输

    Load File Name :zpceshi.bin

    :MSR800-CMW520-R2516P24.BIN //下载文件名，要与下载的实际文件名一致

    Target File Name :zpceshi.bin

    :MSR800-CMW520-R2516P24.BIN //存储的目标文件名。缺省情况下与服务器端文件名一致

    Server IP Address :192.168.1.1 192.168.1.10 //TFTP/FTP服务器的IP地址

    Local IP Address :192.168.1.2 192.168.1.1 //本地IP地址，为TFTP/FTP客户端设置的IP地址

    Gateway IP Address :0.0.0.0 //网关IP地址。当与服务器不在同一网段时需要配置网关地址，否则直接键入<enter>即可

     

     

    ==========================<Enter Ethernet SubMenu>==========================

    |Note:the operating device is flash

    |<1> Download Application Program To SDRAM And Run

    |<2> Update Main Application File

    |<3> Update Backup Application File

    |<4> Update Secure Application File

    |<5> Modify Ethernet Parameter

    |<0> Exit To Main Menu

    |<Ensure The Parameter Be Modified Before Downloading!>

    ============================================================================

    Enter your choice(0-5): 2 //键入<2>为升级主启动文件

    Loading.....................................................................

    ............................................................................

    ............................................................................

    ............................................................................

    ............................................................................

    ............................................................................

    ............................................................................

    ............................................................................

    ......................................Done!

    32570368 bytes downloaded!

    Updating File flash:/MSR93X-CMW520-R2514P14.BIN.............................

    ............................................................................

    ............................................................................

    ......................................................................Done!

     

    ==========================<Enter Ethernet SubMenu>==========================

    |Note:the operating device is flash

    |<1> Download Application Program To SDRAM And Run

    |<2> Update Main Application File

    |<3> Update Backup Application File

    |<4> Update Secure Application File

    |<5> Modify Ethernet Parameter

    |<0> Exit To Main Menu

    |<Ensure The Parameter Be Modified Before Downloading!>

    ============================================================================

    Enter your choice(0-5): 0 //选择<0>，返回BootWare主菜单

     

    ===========================<EXTEND-BOOTWARE MENU>===========================

    |<1> Boot System

    |<2> Enter Serial SubMenu

    |<3> Enter Ethernet SubMenu

    |<4> File Control

    |<5> Restore to Factory Default Configuration

    |<6> Skip Current System Configuration

    |<7> BootWare Operation Menu

    |<8> Clear Super Password

    |<9> Storage Device Operation

    |<0> Reboot

    ============================================================================

    Ctrl+Z: Access EXTEND-ASSISTANT MENU

    Ctrl+F: Format File System

    Ctrl+C: Display Copyright

    Enter your choice(0-9): 1 //选择<1>，启动系统即可完成版本升级

  •