保护c.t.通道的参考值由发电机的额定电流而非机组的额定电流确定
变压器
备选方案3:安装在机组变压器馈线中的C.t
在机组变压器的辅助设备侧(图3.5.2.4)
在这种情况下,c.t是根据的额定电流指定的
单元变压器。
优势:
明确界定的保护区
降低了c.t所需的性能,因此成本更低。
缺点:
插入c.t可能是必要的。
保护装置对受保护装置中故障的灵敏度降低
区域,但在机组变压器的辅助设备侧。
三相变压器的连接组s1、s2、s3
系数s1定义了三相绕组1的连接。
系数s2和s3定义绕组2的连接组
和绕组3,即它们首先定义了
绕组是连接的,其次是它们的相位角
至绕组1。
以下安排是两台发电机的示例
普通升压变压器:
Connection groups s1, s2, and s3 of three-phase transformers
The coefficient s1 defines the connection of three-phase winding 1.
The coefficients s2 and s3 define the connection group of winding 2
And winding 3, which first defined
The windings are connected, followed by their phase angle
To winding 1.
The following arrangement is an example of two generators
Ordinary step-up transformer: