1、关闭虚拟机，增加2张磁盘，模拟新增2块物理硬盘
根据需求修改磁盘大小
添加完成后如图所示
2、启动服务器，以root登录
3、查看磁盘信息
[root@localhost /]# fdisk -l
Disk /dev/sda: 37.6 GB, 37580963840 bytes, 73400320 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000ae75e
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 2099199 1048576 83 Linux
/dev/sda2 2099200 62914559 30407680 8e Linux LVM
Disk /dev/sdb: 1073 MB, 1073741824 bytes, 2097152 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sdc: 2147 MB, 2147483648 bytes, 4194304 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes4、分别对每个磁盘进行分区
[root@localhost /]# fdisk /dev/sdb
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0xa8bf9e37.
Command (m for help): m
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
g create a new empty GPT partition table
G create an IRIX (SGI) partition table
l list known partition types
m print this menu
n add a new partition #增加新分区
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)
Command (m for help): n
Partition type:
p primary (0 primary, 0 extended, 4 free) #逻辑分区
e extended #扩展分区
Select (default p): p
Partition number (1-4, default 1): #按回车取默认值
First sector (2048-2097151, default 2048): #按回车取默认值
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-2097151, default 2097151):
Using default value 2097151
Partition 1 of type Linux and of size 1023 MiB is set
Command (m for help): w #w回车保存设置
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.[root@localhost /]# fdisk /dev/sdc
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0xe7c0c272.
Command (m for help): n
Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): p
Partition number (1-4, default 1):
First sector (2048-4194303, default 2048):
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-4194303, default 4194303):
Using default value 4194303
Partition 1 of type Linux and of size 2 GiB is set
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.5、新增分区后再次查看磁盘信息
[root@localhost /]# fdisk -l
Disk /dev/sda: 37.6 GB, 37580963840 bytes, 73400320 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000ae75e
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 2099199 1048576 83 Linux
/dev/sda2 2099200 62914559 30407680 8e Linux LVM
Disk /dev/sdb: 1073 MB, 1073741824 bytes, 2097152 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0xa8bf9e37
Device Boot Start End Blocks Id System
/dev/sdb1 2048 2097151 1047552 83 Linux
Disk /dev/sdc: 2147 MB, 2147483648 bytes, 4194304 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0xe7c0c272
Device Boot Start End Blocks Id System
/dev/sdc1 2048 4194303 2096128 83 Linux6、格式化分区
[root@localhost /]# mkfs -t ext4 /dev/sdb1
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
65536 inodes, 261888 blocks
13094 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=268435456
8 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376
Allocating group tables: done
Writing inode tables: done
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done[root@localhost /]# mkfs -t xfs /dev/sdc1
meta-data=/dev/sdc1 isize=512 agcount=4, agsize=131008 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=0, sparse=0
data = bsize=4096 blocks=524032, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=1
log =internal log bsize=4096 blocks=2560, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=08、格式化后再次查看磁盘信息
[root@localhost /]# lsblk -f
NAME FSTYPE LABEL UUID MOUNTPOINT
sda
├─sda1 xfs e008266f-d10b-4b54-b2ce-902e28f1f8fe /boot
└─sda2 LVM2_member pCRmuu-Qdz1-BGnm-Z4hZ-3Eic-4uRx-CeEL5o
├─cl-root xfs 82e0dbc6-4e34-4ce3-8c51-2a37779e1041 /
└─cl-swap swap a9fdb3a2-c3be-4d58-9aca-d5308dd24c63 [SWAP]
sdb
└─sdb1 ext4 4698d481-b50d-433c-8476-855fe7ff5f64
sdc
└─sdc1 xfs 790ed65d-110d-40ee-b997-4a74274c5c70
sr0 iso9660 CentOS 7 x86_64 2016-12-05-13-55-45-009、新建文件夹并挂载分区
mkdir /data1/
mkdir /data2/[root@localhost /]# mount /dev/sdb1 /data1/
[root@localhost /]# mount /dev/sdc1 /data2/10、查看硬盘大小及挂载分区
[root@localhost /]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/cl-root 26G 8.1G 18G 32% /
devtmpfs 473M 0 473M 0% /dev
tmpfs 489M 84K 489M 1% /dev/shm
tmpfs 489M 7.1M 482M 2% /run
tmpfs 489M 0 489M 0% /sys/fs/cgroup
/dev/sda1 1014M 173M 842M 18% /boot
tmpfs 98M 0 98M 0% /run/user/0
tmpfs 98M 16K 98M 1% /run/user/42
/dev/sdb1 991M 2.6M 922M 1% /data1
/dev/sdc1 2.0G 33M 2.0G 2% /data2[root@localhost /]# lsblk -f
NAME FSTYPE LABEL UUID MOUNTPOINT
sda
├─sda1 xfs e008266f-d10b-4b54-b2ce-902e28f1f8fe /boot
└─sda2 LVM2_member pCRmuu-Qdz1-BGnm-Z4hZ-3Eic-4uRx-CeEL5o
├─cl-root xfs 82e0dbc6-4e34-4ce3-8c51-2a37779e1041 /
└─cl-swap swap a9fdb3a2-c3be-4d58-9aca-d5308dd24c63 [SWAP]
sdb
└─sdb1 ext4 4698d481-b50d-433c-8476-855fe7ff5f64 /data1
sdc
└─sdc1 xfs 790ed65d-110d-40ee-b997-4a74274c5c70 /data2
sr0 iso9660 CentOS 7 x86_64 2016-12-05-13-55-45-00
11、配置开机自动挂载
[root@localhost /]# vim /etc/fstab在最后加入下面内容
/dev/sdb1 /data1 ext4 defaults 0 0
/dev/sdc2 /data2 xfs defaults 0 0
扫一扫
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
