fdisk -l 查看分区:
[root@OVMM1~]# fdisk /dev/sdc
Thenumber of cylinders for this disk is set to 1566.
There isnothing wrong with that, but this is larger than 1024,
andcould in certain setups cause problems with:
1)software that runs at boot time (e.g., old versions of LILO)
2)booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command(m for help): d
Selectedpartition 1
Command(m for help): 1
1:unknown command
Commandaction
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
l list known partition types
m print this menu
n add a new partition
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)
Command(m for help): n
Commandaction
e extended
p primary partition (1-4)
p
Partitionnumber (1-4): 1
Firstcylinder (1-1566, default 1):
Usingdefault value 1
Lastcylinder or +size or +sizeM or +sizeK (1-1566, default 1566):
Usingdefault value 1566
Command(m for help): w
Thepartition table has been altered!
Callingioctl() to re-read partition table.
Syncingdisks.
[root@OVMM1~]# mke2fs -j -L mypool1 /dev/sdc1
mke2fs1.39 (29-May-2006)
Filesystemlabel=mypool1
OS type:Linux
Blocksize=4096 (log=2)
Fragmentsize=4096 (log=2)
1572864inodes, 3144715 blocks
157235blocks (5.00%) reserved for the super user
Firstdata block=0
Maximumfilesystem blocks=3221225472
96 blockgroups
32768blocks per group, 32768 fragments per group
16384inodes per group
Superblockbackups stored on blocks:
32768, 98304, 163840, 229376, 294912,819200, 884736, 1605632, 2654208
Writinginode tables: done
Creatingjournal (32768 blocks): done
Writingsuperblocks and filesystem accounting information: done
Thisfilesystem will be automatically checked every 23 mounts or
180days, whichever comes first. Use tune2fs-c or -i to override.
[root@OVMM1poolfs]# vi /etc/fstab
[root@OVMM1poolfs]# more /etc/fstab
/dev/VolGroup00/LogVol00/ ext3 defaults 1 1
LABEL=/boot /boot ext3 defaults 1 2
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
/dev/sdb1 /u01 ext3 defaults 1 1
/dev/VolGroup00/LogVol01swap swap defaults 0 0
#LABEL=osimages/ovm3/osimages ext3 defaults 1 1
LABEL=mypool1/ovm3/mypool1/poolfs ext3 defaults 1 1
[root@OVMM1poolfs]# mount -a
[root@OVMM1poolfs]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
19G 2.9G 15G 17% /
/dev/sda1 99M 17M 78M 18% /boot
tmpfs 2.0G 0 2.0G 0% /dev/shm
/dev/sdb1 9.9G 2.9G 6.5G 31% /u01
/dev/sdc1 12G 159M 12G 2% /ovm3/mypool1/poolfs
[root@OVMM1html]# service nfs start
[root@OVMM1 ~]# mount 192.168.1.110:/ovm3/mypool1/poolfs/ /mnt
[root@OVMM1 ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
19G 2.9G 15G 17% /
/dev/sda1 99M 17M 78M 18% /boot
tmpfs 2.0G 0 2.0G 0% /dev/shm
/dev/sdb1 9.9G 2.9G 6.5G 31% /u01
/dev/sdc1 12G 159M 12G 2% /ovm3/mypool1/poolfs
192.168.1.110:/ovm3/mypool1/poolfs/
12G 158M 12G 2% /mnt
[root@OVMM1 ~]# more /etc/exports
#/home/nfs/ovmcluster myserver(no_root_squash,rw)
#/home/nfs/ovmdata myserver(no_root_squash,rw)
/ovm3/mypool1/poolfs 192.168.1.0/24(no_root_squash,rw)