按照提示,可以将原来的代码作一些修改,主要是STMFD的寄存器个数改为偶数个,还要对代码段加上PRESERVE 8的限定。
把ARM资料提供的更改方法列在下面:
There are two possible solutions to work-around this issue:
1) Rebuild all your objects/libraries using RVCT 2.x.
If you have any assembler files, you will need to:
i) check that all instructions preserve 8-byte stack alignment, and if necessary, correct them. (保留8字节堆栈对齐)
e.g. change: 将进栈寄存器数由奇数个改为偶数个
STMFD sp!, {r0-r3, lr} ; push an odd number of registers
to
STMFD sp!, {r0-r3, r12, lr} ; push an even number of registers
and:
ii) add the PRESERVE8 directive to the top of each assembler file. 将PRESERVE8保留字加在每个汇编文件前
e.g. change:
AREA Init, CODE, READONLY
to:
PRESERVE8
AREA Init, CODE, READONLY
(the PRES8 attribute applies to the whole object, not just the code section).
PRESERVE8 这是字节对齐关键词,以前用ADS编译器的时候可以不用,但是后来的keil编译器时需要加上