I2C驱动（2）——读写eeprom

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/mutex.h>
#include <linux/fs.h>
#include <asm/uaccess.h>

static unsigned short ignore[]      = { I2C_CLIENT_END };
static unsigned short normal_addr[] = { 0x50, I2C_CLIENT_END }; /* 地址值是7位 */
                                        /* 改为0x60的话, 由于不存在设备地址为0x60的设备, 所以at24cxx_detect不被调用 */

static unsigned short force_addr[] = {ANY_I2C_BUS, 0x60, I2C_CLIENT_END};
static unsigned short * forces[] = {force_addr, NULL};
										
static struct i2c_client_address_data addr_data = {
	.normal_i2c	= normal_addr,  /* 要发出S信号和设备地址并得到ACK信号,才能确定存在这个设备 */
	.probe		= ignore,
	.ignore		= ignore,
	//.forces     = forces, /* 强制认为存在这个设备 */
};

static struct i2c_driver at24cxx_driver;


static int major;
static struct class