4G专网模块RIL层调试LOG分析

系统版本:Android4.4

D/RILJ    (  623): Starting RILReceiver
I/RILJ    (  623): Connected to 'rild' socket  =》RIL层log分析一般都是从rild已经连接开始

D/RILJ    (  623): [UNSL]< UNSOL_RIL_CONNECTED {9} =》一旦rild连接后,reference-ril.cpp会上报“UNSOL_RIL_CONNECTED"

D/RILJ    (  623): [3648]> RADIO_POWER off
D/RILJ    (  623): [3649]> REQUEST_SET_PREFERRED_NETWORK_TYPE : 0
D/RILJ    (  623): [3650]> RIL_REQUEST_CDMA_SET_SUBSCRIPTION_SOURCE : 1

D/RILJ    (  623): [3651]> RIL_REQUEST_SET_CELL_INFO_LIST_RATE

RIL.java一旦受到“UNSOL_RIL_CONNECTED”会做如下处理(对应上面几行log)：

case RIL_UNSOL_RIL_CONNECTED: {
                if (RILJ_LOGD) unsljLogRet(response, ret);

                // Initial conditions
                setRadioPower(false, null); //RADIO_POWER off
                setPreferredNetworkType(mPreferredNetworkType, null); //REQUEST_SET_PREFERRED_NETWORK_TYPE
                setCdmaSubscriptionSource(mCdmaSubscription, null); //RIL_REQUEST_CDMA_SET_SUBSCRIPTION_SOURCE
                setCellInfoListRate(Integer.MAX_VALUE, null); //RIL_REQUEST_SET_CELL_INFO_LIST_RATE
                notifyRegistrantsRilConnectionChanged(((int[])ret)[0]);
                break;

D/RILJ    (  623): [UNSL]< UNSOL_RESPONSE_RADIO_STATE_CHANGED RADIO_OFF
D/RILJ    (  623): [3652]> SCREEN_STATE: true
D/RILJ    (  623): [3648]< RADIO_POWER 
D/RILJ    (  623): setPhoneType=1 old value=0

D/RILJ    (  623): [3653]> RADIO_POWER on

switch(response) {
            case RIL_UNSOL_RESPONSE_RADIO_STATE_CHANGED:
                /* has bonus radio state int */
                RadioState newState = getRadioStateFromInt(p.readInt());
                if (RILJ_LOGD) unsljLogMore(response, newState.toString());

                switchToRadioState(newState);
            break;

D/RILJ    (  623): [UNSL]< UNSOL_RESPONSE_VOICE_NETWORK_STATE_CHANGED
D/RILJ    (  623): [3658]> OPERATOR
D/RILJ    (  623): [3659]> DATA_REGISTRATION_STATE
D/RILJ    (  623): [3660]> VOICE_REGISTRATION_STATE

D/RILJ    (  623): [3661]> QUERY_NETWORK_SELECTION_MODE

“UNSOL_RESPONSE_VOICE_NETWORK_STATE_CHANGED”是“reference-ril.cpp”上报给RIL.java最重要的一个状态，一旦模块的网络状态改变都要上报“UNSOL_RESPONSE_VOICE_NETWORK_STATE_CHANGED”，“CEREG:/CREG/CGREG”等状态改变都要上报；

reference-ril.cpp代码上报：

static void onUnsolicited (const char *s, const char *sms_pdu)
{
......................
else if (strStartsWith(s,"+CGREG:")
    ) {
        RIL_onUnsolicitedResponse (
            RIL_UNSOL_RESPONSE_VOICE_NETWORK_STATE_CHANGED,
            NULL, 0);
#ifdef WORKAROUND_FAKE_CGEV		
        RIL_requestTimedCallback (onDataCallListChanged, NULL, NULL);
#endif /* WORKAROUND_FAKE_CGEV */
    }
......................
}

RIL.java收到“UNSOL_RESPONSE_VOICE_NETWORK_STATE_CHANGED”会调用到“ pollState();”轮询当前网络状态：

RIL.java

case RIL_UNSOL_RESPONSE_VOICE_NETWORK_STATE_CHANGED:
                if (RILJ_LOGD) unsljLog(response);

                mVoiceNetworkStateRegistrants
                    .notifyRegistrants(new AsyncResult(null, null, null));
            break;

GsmServiceStateTracker.java

 mCi.registerForVoiceNetworkStateChanged(this, EVENT_NETWORK_STATE_CHANGED, null);

case EVENT_NETWORK_STATE_CHANGED:
                pollState();
                break;

private void pollState() {
        mPollingContext = new int[1];
        mPollingContext[0] = 0;

        switch (mCi.getRadioState()) {
            case RADIO_UNAVAILABLE:
                mNewSS.setStateOutOfService();
                mNewCellLoc.setStateInvalid();
                setSignalStrengthDefaultValues();
                mGotCountryCode = false;
                mNitzUpdatedTime = false;
                pollStateDone();
            break;

            case RADIO_OFF:
                mNewSS.setStateOff();
                mNewCellLoc.setStateInvalid();
                setSignalStrengthDefaultValues();
                mGotCountryCode = false;
                mNitzUpdatedTime = false;
                pollStateDone();
            break;

            default:
                // Issue all poll-related commands at once
                // then count down the responses, which
                // are allowed to arrive out-of-order


                mPollingContext[0]++;
                mCi.getOperator(
                    obtainMessage(
                        EVENT_POLL_STATE_OPERATOR, mPollingContext));    //OPERATOR


                mPollingContext[0]++;
                mCi.getDataRegistrationState(
                    obtainMessage(
                        EVENT_POLL_STATE_GPRS, mPollingContext));  //DATA_REGISTRATION_STATE


                mPollingContext[0]++;
                mCi.getVoiceRegistrationState(
                    obtainMessage(
                        EVENT_POLL_STATE_REGISTRATION, mPollingContext)); //VOICE_REGISTRATION_STATE


                mPollingContext[0]++;
                mCi.getNetworkSelectionMode(
                    obtainMessage(
                        EVENT_POLL_STATE_NETWORK_SELECTION_MODE, mPollingContext));  //QUERY_NETWORK_SELECTION_MODE
            break;
        }
    }