wpa_cli

~ # wpa_cli -v
wpa_cli v2.4
Copyright (c) 2004-2015, Jouni Malinen <j@w1.fi> and contributors
~ # 
~ # wpa_cli -h
wpa_cli [-p<path to ctrl sockets>] [-i<ifname>] [-hvB] [-a<action file>] \
        [-P<pid file>] [-g<global ctrl>] [-G<ping interval>]  [command..]
  -h = help (show this usage text)
  -v = shown version information
  -a = run in daemon mode executing the action file based on events from
       wpa_supplicant
  -B = run a daemon in the background
  default path: /var/run/wpa_supplicant
  default interface: first interface found in socket path
commands:
  status [verbose] = get current WPA/EAPOL/EAP status
  ifname = get current interface name
  ping = pings wpa_supplicant
  relog = re-open log-file (allow rolling logs)
  note <text> = add a note to wpa_supplicant debug log
  mib = get MIB variables (dot1x, dot11)
  help [command] = show usage help
  interface [ifname] = show interfaces/select interface
  level <debug level> = change debug level
  license = show full wpa_cli license
  quit = exit wpa_cli
  set = set variables (shows list of variables when run without arguments)
  dump = dump config variables
  get <name> = get information
  logon = IEEE 802.1X EAPOL state machine logon
  logoff = IEEE 802.1X EAPOL state machine logoff
  pmksa = show PMKSA cache
  pmksa_flush = flush PMKSA cache entries
  reassociate = force reassociation
  reattach = force reassociation back to the same BSS
  preauthenticate <BSSID> = force preauthentication
  identity <network id> <identity> = configure identity for an SSID
  password <network id> <password> = configure password for an SSID
  new_password <network id> <password> = change password for an SSID
  pin <network id> <pin> = configure pin for an SSID
  otp <network id> <password> = configure one-time-password for an SSID
  passphrase <network id> <passphrase> = configure private key passphrase
    for an SSID
  sim <network id> <pin> = report SIM operation result
  bssid <network id> <BSSID> = set preferred BSSID for an SSID
  blacklist <BSSID> = add a BSSID to the blacklist
  blacklist clear = clear the blacklist
  blacklist = display the blacklist
  log_level <level> [<timestamp>] = update the log level/timestamp
  log_level = display the current log level and log options
  list_networks = list configured networks
  select_network <network id> = select a network (disable others)
  enable_network <network id> = enable a network
  disable_network <network id> = disable a network
  add_network = add a network
  remove_network <network id> = remove a network
  set_network <network id> <variable> <value> = set network variables (shows
    list of variables when run without arguments)
  get_network <network id> <variable> = get network variables
  dup_network <src network id> <dst network id> <variable> = duplicate network variables
  list_creds = list configured credentials
  add_cred = add a credential
  remove_cred <cred id> = remove a credential
  set_cred <cred id> <variable> <value> = set credential variables
  get_cred <cred id> <variable> = get credential variables
  save_config = save the current configuration
  disconnect = disconnect and wait for reassociate/reconnect command before
    connecting
  reconnect = like reassociate, but only takes effect if already disconnected
  scan = request new BSS scan
  scan_results = get latest scan results
  bss <<idx> | <bssid>> = get detailed scan result info
  get_capability <eap/pairwise/group/key_mgmt/proto/auth_alg/channels/freq/modes> = get capabilies
  reconfigure = force wpa_supplicant to re-read its configuration file
  terminate = terminate wpa_supplicant
  interface_add <ifname> <confname> <driver> <ctrl_interface> <driver_param>
    <bridge_name> = adds new interface, all parameters but <ifname>
    are optional
  interface_remove <ifname> = removes the interface
  interface_list = list available interfaces
  ap_scan <value> = set ap_scan parameter
  scan_interval <value> = set scan_interval parameter (in seconds)
  bss_expire_age <value> = set BSS expiration age parameter
  bss_expire_count <value> = set BSS expiration scan count parameter
  bss_flush <value> = set BSS flush age (0 by default)
  stkstart <addr> = request STK negotiation with <addr>
  ft_ds <addr> = request over-the-DS FT with <addr>
  wps_pbc [BSSID] = start Wi-Fi Protected Setup: Push Button Configuration
  wps_pin <BSSID> [PIN] = start WPS PIN method (returns PIN, if not hardcoded)
  wps_check_pin <PIN> = verify PIN checksum
  wps_cancel Cancels the pending WPS operation
  wps_nfc [BSSID] = start Wi-Fi Protected Setup: NFC
  wps_nfc_config_token <WPS|NDEF> = build configuration token
  wps_nfc_token <WPS|NDEF> = create password token
  wps_nfc_tag_read <hexdump of payload> = report read NFC tag with WPS data
  nfc_get_handover_req <NDEF> <WPS> = create NFC handover request
  nfc_get_handover_sel <NDEF> <WPS> = create NFC handover select
  nfc_report_handover <role> <type> <hexdump of req> <hexdump of sel> = report completed NFC handover
  wps_reg <BSSID> <AP PIN> = start WPS Registrar to configure an AP
  wps_ap_pin [params..] = enable/disable AP PIN
  wps_er_start [IP address] = start Wi-Fi Protected Setup External Registrar
  wps_er_stop = stop Wi-Fi Protected Setup External Registrar
  wps_er_pin <UUID> <PIN> = add an Enrollee PIN to External Registrar
  wps_er_pbc <UUID> = accept an Enrollee PBC using External Registrar
  wps_er_learn <UUID> <PIN> = learn AP configuration
  wps_er_set_config <UUID> <network id> = set AP configuration for enrolling
  wps_er_config <UUID> <PIN> <SSID> <auth> <encr> <key> = configure AP
  wps_er_nfc_config_token <WPS/NDEF> <UUID> = build NFC configuration token
  ibss_rsn <addr> = request RSN authentication with <addr> in IBSS
  sta <addr> = get information about an associated station (AP)
  all_sta = get information about all associated stations (AP)
  deauthenticate <addr> = deauthenticate a station
  disassociate <addr> = disassociate a station
  chan_switch <cs_count> <freq> [sec_channel_offset=] [center_freq1=] [center_freq2=] [bandwidth=] [blocktx] [ht|vht] = CSA parameters
  suspend = notification of suspend/hibernate
  resume = notification of resume/thaw
  roam <addr> = roam to the specified BSS
  p2p_find [timeout] [type=*] = find P2P Devices for up-to timeout seconds
  p2p_stop_find = stop P2P Devices search
  p2p_asp_provision <addr> adv_id=<adv_id> conncap=<conncap> [info=<infodata>] = provision with a P2P ASP Device
  p2p_asp_provision_resp <addr> adv_id=<adv_id> [role<conncap>] [info=<infodata>] = provision with a P2P ASP Device
  p2p_connect <addr> <"pbc"|PIN> [ht40] = connect to a P2P Device
  p2p_listen [timeout] = listen for P2P Devices for up-to timeout seconds
  p2p_group_remove <ifname> = remove P2P group interface (terminate group if GO)
  p2p_group_add [ht40] = add a new P2P group (local end as GO)
  p2p_prov_disc <addr> <method> = request provisioning discovery
  p2p_get_passphrase = get the passphrase for a group (GO only)
  p2p_serv_disc_req <addr> <TLVs> = schedule service discovery request
  p2p_serv_disc_cancel_req <id> = cancel pending service discovery request
  p2p_serv_disc_resp <freq> <addr> <dialog token> <TLVs> = service discovery response
  p2p_service_update = indicate change in local services
  p2p_serv_disc_external <external> = set external processing of service discovery
  p2p_service_flush = remove all stored service entries
  p2p_service_add <bonjour|upnp|asp> <query|version> <response|service> = add a local service
  p2p_service_rep asp <auto> <adv_id> <svc_state> <svc_string> [<svc_info>] = replace local ASP service
  p2p_service_del <bonjour|upnp> <query|version> [|service] = remove a local service
  p2p_reject <addr> = reject connection attempts from a specific peer
  p2p_invite <cmd> [peer=addr] = invite peer
  p2p_peers [discovered] = list known (optionally, only fully discovered) P2P peers
  p2p_peer <address> = show information about known P2P peer
  p2p_set <field> <value> = set a P2P parameter
  p2p_flush = flush P2P state
  p2p_cancel = cancel P2P group formation
  p2p_unauthorize <address> = unauthorize a peer
  p2p_presence_req [<duration> <interval>] [<duration> <interval>] = request GO presence
  p2p_ext_listen [<period> <interval>] = set extended listen timing
  p2p_remove_client <address|iface=address> = remove a peer from all groups
  wfd_subelem_set <subelem> [contents] = set Wi-Fi Display subelement
  wfd_subelem_get <subelem> = get Wi-Fi Display subelement
  fetch_anqp = fetch ANQP information for all APs
  stop_fetch_anqp = stop fetch_anqp operation
  interworking_select [auto] = perform Interworking network selection
  interworking_connect <BSSID> = connect using Interworking credentials
  interworking_add_network <BSSID> = connect using Interworking credentials
  anqp_get <addr> <info id>[,<info id>]... = request ANQP information
  gas_request <addr> <AdvProtoID> [QueryReq] = GAS request
  gas_response_get <addr> <dialog token> [start,len] = Fetch last GAS response
  hs20_anqp_get <addr> <subtype>[,<subtype>]... = request HS 2.0 ANQP information
  nai_home_realm_list <addr> <home realm> = get HS20 nai home realm list
  hs20_icon_request <addr> <icon name> = get Hotspot 2.0 OSU icon
  fetch_osu = fetch OSU provider information from all APs
  cancel_fetch_osu = cancel fetch_osu command
  sta_autoconnect <0/1> = disable/enable automatic reconnection
  tdls_discover <addr> = request TDLS discovery with <addr>
  tdls_setup <addr> = request TDLS setup with <addr>
  tdls_teardown <addr> = tear down TDLS with <addr>
  wmm_ac_addts <uplink/downlink/bidi> <tsid=0..7> <up=0..7> [nominal_msdu_size=#] [mean_data_rate=#] [min_phy_rate=#] [sba=#] [fixed_nominal_msdu] = add WMM-AC traffic stream
  wmm_ac_delts <tsid> = delete WMM-AC traffic stream
  wmm_ac_status = show status for Wireless Multi-Media Admission-Control
  tdls_chan_switch <addr> <oper class> <freq> [sec_channel_offset=] [center_freq1=] [center_freq2=] [bandwidth=] [ht|vht] = enable channel switching with TDLS peer
  tdls_cancel_chan_switch <addr> = disable channel switching with TDLS peer <addr>
  signal_poll = get signal parameters
  pktcnt_poll = get TX/RX packet counters
  reauthenticate = trigger IEEE 802.1X/EAPOL reauthentication
  raw <params..> = Sent unprocessed command
  flush = flush wpa_supplicant state
  driver <command> = driver private commands
  radio_work = radio_work <show/add/done>
  vendor <vendor id> <command id> [<hex formatted command argument>] = Send vendor command
  neighbor_rep_request [ssid=<SSID>] = Trigger request to AP for neighboring AP report (with optional given SSID, default: current SSID)
  erp_flush = flush ERP keys
  mac_rand_scan <scan|sched|pno|all> enable=<0/1> [addr=mac-address mask=mac-address-mask] = scan MAC randomization
  p2p_ago_enable ch=<ch> [ht40] [vht] = start an anonymous p2p group (local end as GO)
  p2p_ago_disable = stop an anonymous p2p group
~ # 

~ # wpa_cli dump
Selected interface 'p2p0'
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=null
eapol_version=1
ap_scan=1
disable_scan_offload=0
fast_reauth=1
opensc_engine_path=null
pkcs11_engine_path=null
pkcs11_module_path=null
openssl_ciphers=null
pcsc_reader=null
pcsc_pin=null
external_sim=0
driver_param=null
dot11RSNAConfigPMKLifetime=0
dot11RSNAConfigPMKReauthThreshold=0
dot11RSNAConfigSATimeout=0
update_config=1
device_name=AAA
manufacturer=BBB
model_name=CCC
model_number=0.0.0.1
serial_number=1234567
config_methods=virtual_push_button physical_display
wps_cred_processing=0
p2p_listen_reg_class=0
p2p_listen_channel=0
p2p_oper_reg_class=0
p2p_oper_channel=11
p2p_go_intent=1
p2p_ssid_postfix=1195linux
persistent_reconnect=1
p2p_intra_bss=1
p2p_group_idle=0
p2p_passphrase_len=0
p2p_add_cli_chan=0
p2p_optimize_listen_chan=0
p2p_go_ht40=0
p2p_go_vht=0
p2p_disabled=0
p2p_go_ctwindow=0
p2p_no_group_iface=1
p2p_ignore_shared_freq=0
bss_max_count=200
bss_expiration_age=180
bss_expiration_scan_count=2
filter_ssids=0
filter_rssi=0
max_num_sta=128
disassoc_low_ack=0
hs20=0
interworking=0
access_network_type=15
pbc_in_m1=0
autoscan=null
wps_nfc_dev_pw_id=0
ext_password_backend=null
p2p_go_max_inactivity=300
auto_interworking=0
okc=0
pmf=0
dtim_period=0
beacon_int=0
ignore_old_scan_res=0
scan_cur_freq=0
sched_scan_interval=0
tdls_external_control=0
osu_dir=null
wowlan_triggers=null
p2p_search_delay=500
mac_addr=0
rand_addr_lifetime=60
preassoc_mac_addr=0
key_mgmt_offload=1
passive_scan=0
reassoc_same_bss_optim=0
p2p_go_ssid=DIRECT-xyfeb7d1
p2p_go_passphrase=12345678
enforce_pin=0
static_pin=12345670
~ # 

~ # wpa_cli p2p_peer 0c:8b:fd:e5:1b:50
Selected interface 'p2p0'
0c:8b:fd:e5:1b:50
pri_dev_type=1-0050F200-0
device_name=DESKTOP-5VBHCUA
manufacturer=
model_name=
model_number=
serial_number=
config_methods=0x11e8
dev_capab=0x24
group_capab=0x82
level=0
persistent=1
age=45
listen_freq=2462
wps_method=not-ready
interface_addr=00:00:00:00:00:00
member_in_go_dev=00:00:00:00:00:00
member_in_go_iface=00:00:00:00:00:00
go_neg_req_sent=0
go_state=remote
dialog_token=7
intended_addr=0e:8b:fd:e5:1b:50
country=XX
oper_freq=2412
req_config_methods=0x0
flags=[REPORTED][PREFER_PERSISTENT_GROUP]
status=0
invitation_reqs=0
ext_listen_period=336
ext_listen_interval=486
wfd_subelems=00000601101c440006
~ # 

P2P-DEVICE-FOUND 12:9f:a9:fe:fd:39 p2p_dev_addr=12:9f:a9:fe:fd:39 pri_dev_type=7-0050F204-1 name='SBMC FEFD39' config_methods=0x88 dev_capab=0x21 group_capab=0x0 wfd_dev_info=0x0111216a0032 new=1

P2P-DEVICE-FOUND 12:9f:a9:fe:fd:39 p2p_dev_addr=12:9f:a9:fe:fd:39 pri_dev_type=7-0050F204-1 name='SBMC FEFD39' config_methods=0x88 dev_capab=0x21 group_capab=0x2a wfd_dev_info=0x0111216a0032 new=1

P2P-PROV-DISC-PBC-REQ 12:9f:a9:fe:fd:39 p2p_dev_addr=12:9f:a9:fe:fd:39 pri_dev_type=7-0050F204-1 name='SBMC FEFD39' config_methods=0x88 dev_capab=0x21 group_capab=0x0

P2PS-PROV-DONE 12:9f:a9:fe:fd:39 status=0 conncap=1 adv_id=4d6fc8 adv_mac=12:9f:a9:fe:b7:d1 session=12ab34 mac=12:9f:a9:fe:b7:d1 dev_passwd_id=1

P2P-PROV-DISC-SHOW-PIN 12:9f:a9:fe:fd:39 12345670 p2p_dev_addr=12:9f:a9:fe:fd:39 pri_dev_type=7-0050F204-1 name='SBMC FEFD39' config_methods=0x88 dev_capab=0x21 group_capab=0x2a