模拟IIC

标记下模拟IIC驱动代码

#if 1
///
//I2C    sound
/
// Set I2C SCL pin high/low.
//
// Arguments: bSet - high/low bit
/
void i2cSetSCL_tw8823(BYTE bSet)
{


    if(bSet) GPIO_SetBits(P_TW8823_SCL_PORT, P_TW8823_SCL);
    else GPIO_ResetBits(P_TW8823_SCL_PORT, P_TW8823_SCL);


}
/
// Set I2C SDA pin high/low
//
// Arguments: bSet - high/low bit
/
void i2cSetSDA_tw8823(BYTE bSet)
{


  if(bSet) GPIO_SetBits(P_TW8823_SDA_PORT, P_TW8823_SDA);
  else   GPIO_ResetBits(P_TW8823_SDA_PORT, P_TW8823_SDA);
  
}
//
// Delay 4us
//
#define i2c_Delay_tw8823()
//{
   //delay_10us();
   //delay_5us();
//delay_1us();
//delay_1us();
//delay_1us();
//}
//
// I2C start signal.
// <comment>
//  SCL ________
//              \_________
//  SDA _____
//           \____________
//
// Return value: None
//
BYTE i2c_Start_tw8823(void)
{
    BYTE bStatus = TRUE; // success status
   
    i2cSetSDA_tw8823(_HIGH);
    i2c_Delay_tw8823();
    i2cSetSCL_tw8823(_HIGH);
    i2c_Delay_tw8823();




   if ((i2cSCL_PIN_STATUS_tw8823() == _LOW) || (i2cSDA_PIN_STATUS_tw8823() == _LOW))
    {

        bStatus = FALSE;
    }
    else
    {

        i2cSetSDA_tw8823(_LOW);
        i2c_Delay_tw8823();
        i2cSetSCL_tw8823(_LOW);
i2c_Delay_tw8823();

    }


    return bStatus;
}
/
// I2C stop signal.
// <comment>
//              ____________
//  SCL _______/
//                 _________
//  SDA __________/
/
void i2c_Stop_tw8823(void)
{
  /* Configure I2C1 pins: SCL and SDA */ 


    i2cSetSCL_tw8823(_LOW);
    i2c_Delay_tw8823();
    i2cSetSDA_tw8823(_LOW);
    i2c_Delay_tw8823();
    i2cSetSCL_tw8823(_HIGH);
    i2c_Delay_tw8823();
    i2cSetSDA_tw8823(_HIGH);
    i2c_Delay_tw8823();


}


//
// I2C send byte to device.
//
// Arguments: ucVal - send byte
// Return value: I2C acknowledge bit
//               I2C_ACKNOWLEDGE/I2C_NON_ACKNOWLEDGE
//
BYTE i2c_SendByte_tw8823(BYTE ucVal)
{
    BYTE    ucMask = 0x80;
    BYTE     bAck=FALSE; // acknowledge bit
    BYTE     i;


    while(ucMask)
    {
        if (ucVal & ucMask)
            i2cSetSDA_tw8823(_HIGH);
        else
            i2cSetSDA_tw8823(_LOW);
        i2c_Delay_tw8823();
        i2cSetSCL_tw8823(_HIGH); // clock
        i2c_Delay_tw8823();
        i2cSetSCL_tw8823(_LOW);
        i2c_Delay_tw8823();


        ucMask >>= 1; // next
    } // while


    // recieve acknowledge
    i2cSetSDA_tw8823(_HIGH);
    i2c_Delay_tw8823();
    i2cSetSCL_tw8823(_HIGH);
    i2c_Delay_tw8823();


   
   ///ACK check




   for(i=0;i<100;i++)
   {
if(i2cSDA_PIN_STATUS_tw8823()==0)
{
break;
}


    i2c_Delay_tw8823();
   }


// if(i<100)
// i=9;
// else
// i=0;
    bAck = i2cSDA_PIN_STATUS_tw8823(); // recieve acknowlege


    ///
    i2cSetSCL_tw8823(_LOW);

    return (bAck);
}
//
// I2C receive byte from device.
//
// Return value: receive byte
//
BYTE i2c_ReceiveByte_tw8823(BYTE bAck)
{
    BYTE    ucReceive = 0;
    BYTE    ucMask = 0x80;


   i2cSetSDA_tw8823(_HIGH);


    while(ucMask)
    {
i2cSetSCL_tw8823(_HIGH);
i2c_Delay_tw8823();
if(GPIO_ReadInputDataBit(P_TW8823_SDA_PORT, P_TW8823_SDA) == _HIGH)
ucReceive |= ucMask;

i2cSetSCL_tw8823(_LOW);
i2c_Delay_tw8823();


        ucMask >>= 1;
    } // while
   
  if (bAck) // acknowledge
        i2cSetSDA_tw8823(I2C_ACKNOWLEDGE);
    else // non-acknowledge
        i2cSetSDA_tw8823(I2C_NON_ACKNOWLEDGE);


    i2c_Delay_tw8823();
    i2cSetSCL_tw8823(_HIGH);
    i2c_Delay_tw8823();
    i2cSetSCL_tw8823(_LOW);


    return ucReceive;


}


//
// I2C access start.
//
// Arguments: ucSlaveAdr - slave address
//            trans_t - I2C_TRANS_WRITE/I2C_TRANS_READ
//
BYTE i2c_AccessStart_tw8823(BYTE ucSlaveAdr, I2C_Direction trans_t)
{
    BYTE ucDummy; // loop dummy


    if (trans_t == I2C_READ) // check i2c read or write
        ucSlaveAdr = I2C_DEVICE_ADR_READ(ucSlaveAdr); // read
    else
        ucSlaveAdr = I2C_DEVICE_ADR_WRITE(ucSlaveAdr); // write


    ucDummy = I2C_ACCESS_DUMMY_TIME;
    while (ucDummy--)
    {    
i2c_Delay_tw8823();
        if (i2c_Start_tw8823() == FALSE)
            continue;


        if (i2c_SendByte_tw8823(ucSlaveAdr) == I2C_ACKNOWLEDGE) // check acknowledge
            return TRUE;
//printf("ucSlaveAdr====%x", ucSlaveAdr);
       // i2c_Stop_tw8823();
       // Delay_1ms(1);
    }


    return FALSE;
}
/
// I2C write bytes to device.
//
// Arguments: ucSlaveAdr - slave address
//            ucSubAdr - sub address
//            pBuf - pointer of buffer
//            ucBufLen - length of buffer
/
BOOL i2cWrite_Sub_tw8823(BYTE ucSlaveAdr, BYTE ucSubAdr, BYTE *pBuf, BYTE ucBufLen)
{
    BYTE ucDummy; // loop dummy
//BYTE i;


    //i2c_Stop_tw8823();
    ucDummy = I2C_ACCESS_DUMMY_TIME;
    while(ucDummy--)
    {
        if (i2c_AccessStart_tw8823(ucSlaveAdr, I2C_WRITE) == FALSE)
        {
            continue;
        }
        if (i2c_SendByte_tw8823(ucSubAdr) == I2C_NON_ACKNOWLEDGE) // check non-acknowledge
            continue;


        while(ucBufLen--) // loop of writting data
        {
            i2c_SendByte_tw8823(*pBuf); // send byte
            pBuf++; // next byte pointer
        } // while


        break;
    } // while


i2c_Stop_tw8823();


    if(ucDummy==0)
    {
return FALSE;
    }
    else
    {
return TRUE;
    }
}


/
// I2C read bytes from device.
//
// Arguments: ucSlaveAdr - slave address
//            ucSubAdr - sub address
//            pBuf - pointer of buffer
//            ucBufLen - length of buffer
/


BOOL i2cRead_Sub_tw8823(BYTE ucSlaveAdr, BYTE ucSubAdr, BYTE *pBuf, BYTE ucBufLen)
{
    BYTE ucDummy; // loop dummy


    //i2c_Stop_tw8823();
    ucDummy = I2C_ACCESS_DUMMY_TIME;
    while(ucDummy--)
    {
        if (i2c_AccessStart_tw8823(ucSlaveAdr, I2C_WRITE) == FALSE)
            continue;


        if (i2c_SendByte_tw8823(ucSubAdr) == I2C_NON_ACKNOWLEDGE) // check non-acknowledge
            continue;


        if (i2c_AccessStart_tw8823(ucSlaveAdr, I2C_READ) == FALSE)
            continue;


        while(ucBufLen--) // loop to burst read
        {
            *pBuf = i2c_ReceiveByte_tw8823(ucBufLen); // receive byte


            pBuf++; // next byte pointer
        } // while


        break;
    } // while


i2c_Stop_tw8823();


    if(ucDummy==0)
    {
return FALSE;
    }
    else
    {
return TRUE;
    }
}


void WriteTW88(Byte addr,Byte b)
{
Byte buff[1];


buff[0]=b;
    i2cWrite_Sub_tw8823(TW8823_ADDRESS,addr,buff,1);
}
Byte ReadTW88(Byte addr)
{
Byte buff[1];


i2cRead_Sub_tw8823(TW8823_ADDRESS,addr,buff,1);
return buff[0];
}
void WriteTW88_Page(WORD addr,Byte b)
{
WriteTW88( 0xff, HIBYTE(addr ));
WriteTW88(LOBYTE(addr),b);
}
Byte ReadTW88_Page(WORD addr)
{
WriteTW88( 0xff, HIBYTE(addr) );
return  ReadTW88(LOBYTE(addr));
}




void WriteRadioFM(Byte addr,Byte b)
{
Byte buff[1];


buff[0]=b;
    i2cWrite_Sub_tw8823(RadioFM_ADDRESS,addr,buff,1);
}
Byte ReadRadioFM(Byte addr)
{
Byte buff[1];


i2cRead_Sub_tw8823(RadioFM_ADDRESS,addr,buff,1);
return buff[0];
}


#endif