需要在PCB板子上加个logo图标。客户提供了矢量图或图片。
1、安装Wintopo软件。
2、打开图片,然后选择“矢量”选项,选择“提取”或“精细”,再选择“矢量提取-交叉点外延伸”选项。开始进行矢量化。
3、矢量结束之后,保存dxf文件。
4、通过pads导入dxf文件即可。
需要在PCB板子上加个logo图标。客户提供了矢量图或图片。
1、安装Wintopo软件。
2、打开图片,然后选择“矢量”选项,选择“提取”或“精细”,再选择“矢量提取-交叉点外延伸”选项。开始进行矢量化。
3、矢量结束之后,保存dxf文件。
4、通过pads导入dxf文件即可。