vsftpd-3.0.3移植

##############################################################################

这里是busybox里面的ftpd运行方式。

server服务器配置

不能直接在ftpd服务器上直接创建目录，不能上传带文名的文件
方法1:
mkdir /gliethttp_ftpd_dir
cp /bin/busybox /gliethttp_ftpd_dir
tcpsvd 0 21 ftpd -w /gliethttp_ftpd_dir &
//可以通过tcpsvd --help：tcpsvd [-hEv] [-c N] [-C N[:MSG]] [-b N] [-u USER] [-l NAME] IP PORT PROG

//0是所有ip，21端口，运行ftpd（ftpd --help可以看到），-w允许上传，操作目录。

方法2:
# mkdir /gliethttp_ftpd_dir
# cp /bin/busybox /gliethttp_ftpd_dir
# vi /etc/inetd.conf
21 stream tcp nowait root ftpd ftpd -w /gliethttp_ftpd_dir

####################################################################################

简单一点的stupid-ftpd

####################################################################################

 

1.下载源码包:我是在git上面找的一个

git clone https://github.com/sverre/vsftpd-3.0.3.git

2.编译:

修改Makefile:

#CC     =       gcc
CC=arm-xxx-linux-gcc

然后直接make

3.配置vsftpd.conf(网上一大把),拷贝vsftpd.conf到/etc/目录下, vsftpd到/usr/sbin

因为配置文件有:chroot_list_file=/etc/vsftpd.chroot_list

所以创建/etc/vsftpd.chroot_list准入名单.并添加username

4.adduser username -h /home/testdir

passwd username

输入密码

5.运行vsftpd

6.我们用window的cmd窗口来连接ftp,进行测试:

ftp 192.168.1.22

错误:500 OOPS: failed to open vsftpd log file:/var/log/vsftpd.log

那就创建对应目录,文件.或者屏蔽掉#xferlog_file=/var/log/vsftpd.log

错误500 OOPS: vsftpd: not found: directory given in 'secure_chroot_dir':/var/run/vsftpd/empty

创建对应目录

错误500 OOPS: cannot locate user entry:nobody

修改vsftpd.conf配置:

nopriv_user=username(已经有的用户).

错误500 OOPS: vsftpd: refusing to run with writable root inside chroot()

去掉名单:

#chroot_local_user=YES
#chroot_list_enable=YES
#chroot_list_file=/etc/vsftpd.chroot_list

 

启动脚本参考:

dyAdduserFun()
{
    cat /etc/passwd > /tmp/userTempId.txt;
    tempfv=`sed -n "/^$dyFtpName/p" /tmp/userTempId.txt`;
    echo ==tempDyfind=$tempfv;
    if [ "$tempfv" = "" ];then
        adduser $dyFtpName -h $mntDir&
    fi
}

    mkdir -p $mntDir
    dyAdduserFun;
    mkdir -p /var/run/vsftpd/empty;
    #touch /etc/vsftpd.chroot_list;
    #echo root > /etc/vsftpd.chroot_list;
    #echo $dyFtpName > /etc/vsftpd.chroot_list;
    ifconfig eth0 192.168.1.xx;
    killall -9 vsftpd;
    $dySampleDir/vsftpd $dySampleDir/vsftpd.conf&

 

我的config文件参考:

# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
#
# Run standalone?  vsftpd can run either from an inetd or as a standalone
# daemon started from an initscript.
listen=NO
#
# This directive enables listening on IPv6 sockets. By default, listening
# on the IPv6 "any" address (::) will accept connections from both IPv6
# and IPv4 clients. It is not necessary to listen on *both* IPv4 and IPv6
# sockets. If you want that (perhaps because you want to listen on specific
# addresses) then you must run two copies of vsftpd with two configuration
# files.
listen_ipv6=YES
#
# Allow anonymous FTP? (Disabled by default).
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
local_enable=YES
local_root=/mnt/sdcard
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# If enabled, vsftpd will display directory listings with the time
# in  your  local  time  zone.  The default is to display GMT. The
# times returned by the MDTM FTP command are also affected by this
# option.
use_localtime=YES
#
# Activate logging of uploads/downloads.
#xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format.
# Note that the default log file location is /var/log/xferlog in this case.
#xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
nopriv_user=surpass
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
ascii_upload_enable=YES
ascii_download_enable=YES
#
# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
#
# You may restrict local users to their home directories.  See the FAQ for
# the possible risks in this before using chroot_local_user or
# chroot_list_enable below.
#chroot_local_user=YES
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
# (Warning! chroot'ing can be very dangerous. If using chroot, make sure that
# the user does not have write access to the top level directory within the
# chroot)
allow_writeable_chroot=YES
#chroot_local_user=YES
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd.chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
# Customization
#
# Some of vsftpd's settings don't fit the filesystem layout by
# default.
#
# This option should be the name of a directory which is empty.  Also, the
# directory should not be writable by the ftp user. This directory is used
# as a secure chroot() jail at times vsftpd does not require filesystem
# access.
secure_chroot_dir=/var/run/vsftpd/empty
#
# This string is the name of the PAM service vsftpd will use.
pam_service_name=vsftpd
#
# This option specifies the location of the RSA certificate to use for SSL
# encrypted connections.
rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
ssl_enable=NO

#
# Uncomment this to indicate that vsftpd use a utf8 filesystem.
#utf8_filesystem=YES