DSP28_DevEmu.h头文件寄存器说明

//
// TMDX ALPHA RELEASE
// Intended for product evaluation purposes
//
//###########################################################################
//
// FILE: DSP28_SysCtrl.c
//
// TITLE: DSP28 Device System Control Initialization & Support Functions.
//
//###########################################################################
//
// Ver | dd mmm yyyy | Who | Description of changes
// =====|=============|======|===============================================
// 0.55| 06 May 2002 | L.H. | EzDSP Alpha Release
// 0.56| 20 May 2002 | L.H. | No change
// 0.57| 24 May 2002 | L.H. | Added initialization of RAM control registers
// | | | for TMX samples.
//###########################################################################

#include "DSP28_Device.h"

//—————————————————————————
// InitSysCtrl:
//—————————————————————————
// This function initializes the System Control registers to a known state.
//
void InitSysCtrl(void)
{
Uint16 i;
EALLOW;
// On TMX samples, to get the best performance of on chip RAM blocks M0/M1/L0/L1/H0 internal
// control registers bit have to be enabled. The bits are in Device emulation registers.
DevEmuRegs.M0RAMDFT = 0×0300;
DevEmuRegs.M1RAMDFT = 0×0300;
DevEmuRegs.L0RAMDFT = 0×0300;
DevEmuRegs.L1RAMDFT = 0×0300;
DevEmuRegs.H0RAMDFT = 0×0300;
// Disable watchdog module
SysCtrlRegs.WDCR= 0×0068;

// Initalize PLL
SysCtrlRegs.PLLCR = 0xA;
// Wait for PLL to lock
for(i= 0; i< 5000; i++){}
// HISPCP/LOSPCP prescale register settings, normally it will be set to default values
SysCtrlRegs.HISPCP.all = 0×0001;
SysCtrlRegs.LOSPCP.all = 0×0002;
// Peripheral clock enables set for the selected peripherals.
SysCtrlRegs.PCLKCR.bit.EVAENCLK=1;
SysCtrlRegs.PCLKCR.bit.EVBENCLK=1;
SysCtrlRegs.PCLKCR.bit.SCIENCLKA=1;
// SysCtrlRegs.PCLKCR.bit.SCIENCLKB=1;
EDIS;
}

//—————————————————————————
// KickDog:
//—————————————————————————
// This function resets the watchdog timer.
// Enable this function for using KickDog in the application
/*
void KickDog(void)
{
EALLOW;
SysCtrlRegs.WDKEY = 0×0055;
SysCtrlRegs.WDKEY = 0x00AA;
EDIS;
}
*/
//===========================================================================
// No more.
//===========================================================================

在这个头文件中主要牵涉到与器件仿真相关的一组寄存器，包括器件配置寄存器DEVICECNF，部件ID寄存器PARTID，芯片修订ID寄存器REVID，先写后读保护寄存器PROTSTART和PROTRANGE，另外还有五组寄存器M0RAMDFT，M1RAMDFT，L0RAMDFT，L1RAMDFT，H0RAMDFT，这五组寄存器是TMX系列使用的，TMS系列的DSP上述地址为保留地址，不再使用。