xbuild.sh

最新推荐文章于 2024-04-12 09:48:26 发布
最新推荐文章于 2024-04-12 09:48:26 发布
阅读量143 收藏
点赞数
分类专栏： UNIX
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/iteye_20559/article/details/82357925
版权
ME=xbuild.sh

#echo - Check for updates ......
if [ /home/sh13256/$ME -nt $0 ]; then
# echo - New version found. Update ...
cp /home/sh13256/$ME $0
echo - $0 Updated. Relaunching ...
echo
echo "$0 $*"
$0 $*
exit
fi
#echo - $0 is up to date

#set -x

Usage(){
echo
echo " Usage:"
echo
echo " - 1 - Compilation Jobs - "
echo
echo " $0 lqtfront : build LQT front end (CVS Update, Compile)"
echo " $0 lqtback : build LQT back end (CVS Update, Compile)"
echo " $0 lqt : build LQT front & back (CVS Update, Compile)"
echo
echo " $0 lqtfront [N] : build LQT front end lazily"
echo " $0 lqtback [N] : build LQT back end lazily"
echo " $0 lqt [N] : build LQT front & back lazily"
echo
echo " $0 lqtfrontC : build LQT front end (Compile Only)"
echo " $0 lqtbackC : build LQT back end (Compile Only)"
echo
echo " $0 loanwl : build Loan WL"
echo " $0 loanwl [N] : build Loan WL lazily"
echo
echo " [N] : number of updated files, will skip compile if there are not enough updates."
echo
echo " Create a file 'To' at the same dir. Enter email addresses in it, one email each line."
echo " Logs will be send to these emails."
echo
echo " - 2 - Hermes Jobs - "
echo
echo " $0 lqtfrontH releasetype [config file] : send LQT front end to Hermes "
echo " $0 lqtbackH releasetype [config file] : send LQT back end to Hermes "
echo " $0 loanwlH releasetype [config file] : send LoanWL to Hermes "
echo " $0 lqtDBH releasetype [config file] : send LoansQTDB to Hermes "
echo
echo " releasetype = integration | major | minor | bugfix | resubmission"
echo " in [config file]: AdditionalEmailList=[comma separated list of email addresses to CC.]"
echo

exit

}

if [ $# -lt 1 ]; then
Usage
fi

CMD=$1
CMD_LQT='lqt'
CMD_FRONT='lqtfront'
CMD_BACK='lqtback'
CMD_LWL='loanwl'
CMD_LQTDBH='lqtDBH'
xROOT=`pwd`
LOGFRONT=$xROOT/.$CMD_FRONT.log
LOGBACK=$xROOT/.$CMD_BACK.log
LOGLWL=$xROOT/.$CMD_LWL.log
LOGCVS=$xROOT/.cvs.log
LOG_DB=$xROOT/.$CMD_LQTDBH.log
TO=$xROOT/To

LWL_COMPILE=lwlCompile
BRANCH_FILE=$xROOT/.branch
LQT_BRANCH=`cat ${BRANCH_FILE} | grep '^LQT:' | sed 's/^LQT://'`
LWL_BRANCH=`cat ${BRANCH_FILE} | grep '^LWL:' | sed 's/^LWL://'`


sendMail(){
# #set -x

TOLIST=`echo shangshang.hu@iuo.citi.com`
MY_MAIL=$TOLIST
if [ -f $TO ]; then
TOLIST=`cat $TO | tr '\n' ' '`
elif [ -f /home/sh13256/To ]; then
TOLIST=`cat /home/sh13256/To | tr '\n' ' '`
fi

echo "---------------- Send Mail Start ------------------"

mailx -b $MY_MAIL -t <<EOF
To: $TOLIST
Subject: $1
Mime-Version: 1.0;
Content-Type: text/html; charset="ISO-8859-1";
Content-Transfer-Encoding: 7bit;
<html><body><pre style='font-size:12px; color:003366'>
`cat $2`
</pre></body></html>
EOF

echo " Subject : $1"
echo " Attach : $2"
echo " Sent to : ${TOLIST}"
echo "---------------- Send Mail Finish ------------------"

# mailx -s $1 -b shangshang.hu@citi.com "$TOLIST" < $2

# for to in $TOLIST
# do
# mailx -s $1 ${to}< $2
# echo " - Mail sent to ${to}"
# done
}

updateCode(){
# set -x

echo
echo "========== Updating Code from CVS STARTED: `date` =========="
echo "========== Updating Code from CVS STARTED: `date` ==========" >> $1
rm -f ./checkout
cp /home/sh13256/checkout.sh checkout
chmod +x ./checkout

if [ $1 = $LOGLWL ]; then
if [ -d $xROOT/zTRSBackEnd ]; then
echo " - Source code found, start update. (zTRSBackEnd) "
./checkout updateLWL $1
else
echo " - No source code found, please do checkout first. "
exit
fi
else
# if [ $1 = $LOGBACK ] or [ $1 = $LOGFRONT ]; then
if [ -d $xROOT/LoansQuickTicket/LQT ]; then
echo " - Source code found, start update. (LoansQuickTicket/LQT) "
./checkout updateLQT $1
else
echo " - No source code found, please do checkout first. "
exit
fi
fi

rm -f ./checkout
}

lazyPrepare(){
# set -x

rm $LOGCVS
cat $1 | grep "^[UPARMC]" | sed '/LQT\/libBack\/CBIdl\/idl\/CBTicket\.idl/d' >> $LOGCVS
COUNT=`wc -l $LOGCVS | sed 's/ \/.*$//' | sed 's/ //g'`
echo "" >> $LOGCVS
echo "$COUNT file(s) updated" >> $LOGCVS

echo " - $COUNT file(s) updated"

BRANCH='Trunk'

if [ $LQT_BRANCH ]; then
BRANCH=$LQT_BRANCH
fi
if [ $1 = $LOGLWL ]; then
if [ $LWL_BRANCH ]; then
BRANCH=$LWL_BRANCH
fi
fi

if [ $# -gt 1 ]; then
if [ $COUNT -le $2 ]; then
echo " - Required changes for compile: [$2] - Skip !"
echo "Not Enough Changes. [$2] - Skip Compile" >> $LOGCVS
if [ $COUNT -gt 0 ]; then
sendMail "CVS_${BRANCH}_${xROOT}" $LOGCVS
fi
exit
fi
fi

if [ $COUNT -gt 0 ]; then
sendMail "CVS_${BRANCH}_${xROOT}" $LOGCVS
fi

echo
echo "========== Prepare Code STARTED: `date` =========="
rm -f ./checkout
cp /home/sh13256/checkout.sh checkout

chmod +x ./checkout

if [ $1 = $LOGLWL ]; then
if [ -d $xROOT/zTRSBackEnd ]; then
echo " - Source code found, start prepare. (zTRSBackEnd) "
./checkout prepareLWL $1
else
echo " - No source code found, please do checkout first. "
exit
fi
else
# if [ $1 = $LOGFRONT ] or [ $1 = $LOGBACK ]; then
if [ -d $xROOT/LoansQuickTicket/LQT ]; then
echo " - Source code found, start prepare. (LoansQuickTicket/LQT) "
./checkout prepareLQT $1
else
echo " - No source code found, please do checkout first. "
exit
fi
fi

rm -f ./checkout

}

doCompile(){
# #set -x

echo
echo "========== Compile STARTED: `date` Logging to $1 =========="
echo
echo " Please wait ....... "
echo
echo "========== Compile STARTED: `date` Logging to $1 ==========" >> $1

if [ $1 = $LOGFRONT ]; then
cd $xROOT/LoansQuickTicket/compile
cp /home/sh13256/build.sh build
chmod +x ./build
./build build_front $1
rm -f ./build
elif [ $1 = $LOGBACK ]; then
cd $xROOT/LoansQuickTicket/compile
cp /home/sh13256/build.sh build
chmod +x ./build
./build build_back $1
rm -f ./build
elif [ $1 = $LOGLWL ]; then
cp /home/sh13256/build.sh build
chmod +x ./build
./build build_loanWL $1 "${xROOT}/$LWL_COMPILE/"
rm -f ./build
else
echo Unknown Log file for do compile: $1
fi

echo "========== Compile ENDED: `date` Logged to $1 =========="
echo "========== Compile ENDED: `date` Logged to $1 ==========" >> $1
}


achive(){

currdate=`date '+%m%d%H%M%S'`
cd $xROOT

archivePath=$xROOT/archive

find $archivePath -mtime +10 -exec rm -rf {} \;

if [ ! -d $archivePath ]; then
mkdir $archivePath
fi

msg=". - Archive failed"

if [ $1 = $LOGFRONT ]; then
cp $xROOT/LoansQuickTicket/compile/front/LQTFront.dstream $archivePath/LQTFront.dstream.$currdate
if [ -f $archivePath/LQTFront.dstream.$currdate ]; then
msg=". - Archived to $archivePath/LQTFront.dstream.$currdate"
fi
elif [ $1 = $LOGBACK ]; then
cp $xROOT/LoansQuickTicket/compile/back/LoansQT.dstream $archivePath/LoansQT.dstream.$currdate
if [ -f $archivePath/LoansQT.dstream.$currdate ]; then
msg=". - Archived to $archivePath/LoansQT.dstream.$currdate"
fi
elif [ $1 = $LOGLWL ]; then
cp $xROOT/$LWL_COMPILE/LoanWL.dstream $archivePath/LoanWL.dstream.$currdate
if [ -f $archivePath/LoanWL.dstream.$currdate ]; then
msg=". - Archived to $archivePath/LoanWL.dstream.$currdate"
fi
fi

chmod 777 $archivePath/*

echo $msg
echo $msg >> $1

}

sendToHermes(){

cp /home/sh13256/build.sh build
chmod +x ./build
if [ $# -lt 2 ]; then
./build hermes
rm ./build
exit
fi

if [ $1 = $LOGFRONT ]; then
./build hermes $2 lqtfront $3
elif [ $1 = $LOGBACK ]; then
./build hermes $2 lqtback $3
elif [ $1 = $LOGLWL ]; then
./build hermes $2 loanwl $3
elif [ $1 = $LOG_DB ]; then
./build hermes $2 lqtdb $3
fi

rm ./build

}

doPrepareProcess(){
rm -f $1
updateCode $1
lazyPrepare $1 $2
}

doPostPreparePorcess(){
doCompile $1
achive $1

BRANCH='Trunk'
RESULT='FAILED'
PROJ_NAME=''

if [ $1 = $LOGFRONT ]; then
if [ ${LQT_BRANCH} ]; then
BRANCH=${LQT_BRANCH}
fi
DSTREAM=$xROOT/LoansQuickTicket/compile/front/LQTFront.dstream
if [ -f $DSTREAM ] and [ $DSTREAM -nt $1 ]; then
RESULT='SUCCESS'
fi
PROJ_NAME='LQTFront'
elif [ $1 = $LOGBACK ]; then
if [ ${LQT_BRANCH} ]; then
BRANCH=${LQT_BRANCH}
fi
DSTREAM=$xROOT/LoansQuickTicket/compile/back/LoansQT.dstream
if [ -f $DSTREAM ] and [ $DSTREAM -nt $1 ]; then
RESULT='SUCCESS'
fi
PROJ_NAME='LoansQT'
elif [ $1 = $LOGLWL ]; then
if [ ${LWL_BRANCH} ]; then
BRANCH=${LWL_BRANCH}
fi
DSTREAM=$xROOT/$LWL_COMPILE/LoanWL.dstream
if [ -f $DSTREAM ] and [ $DSTREAM -nt $1 ]; then
RESULT='SUCCESS'
fi
PROJ_NAME='LoanWL'
fi

sendMail "${RESULT}_${PROJ_NAME}_${BRANCH}_${xROOT}" $1

}


#====================== LQT Update - Compile ======================
if [ $CMD = $CMD_BACK ]; then

if [ -d $xROOT/LoansQuickTicket/LQT ]; then
doPrepareProcess $LOGBACK $2
doPostPreparePorcess $LOGBACK
else
echo
echo "Build folder not fund."
echo "Required $xROOT/LoansQuickTicket/LQT"
fi

elif [ $CMD = $CMD_FRONT ]; then

if [ -d $xROOT/LoansQuickTicket/LQT ]; then
doPrepareProcess $LOGFRONT $2
doPostPreparePorcess $LOGFRONT
else
echo
echo "Build folder not fund."
echo "Required $xROOT/LoansQuickTicket/LQT"
fi

#====================== LQT Compile Only ======================
elif [ $CMD = ${CMD_BACK}C ]; then

if [ -d $xROOT/LoansQuickTicket/LQT ]; then
rm -f $LOGBACK
doPostPreparePorcess $LOGBACK
else
echo
echo "Build folder not fund."
echo "Required $xROOT/LoansQuickTicket/LQT"
fi

elif [ $CMD = ${CMD_FRONT}C ]; then

if [ -d $xROOT/LoansQuickTicket/LQT ]; then
rm -f $LOGFRONT
doPostPreparePorcess $LOGFRONT
else
echo
echo "Build folder not fund."
echo "Required $xROOT/LoansQuickTicket/LQT"
fi

#====================== LQT Update - Compile Together ======================
elif [ $CMD = ${CMD_LQT} ]; then

rm -f ${LOGFRONT}
updateCode ${LOGFRONT}
lazyPrepare ${LOGFRONT} $2
doPostPreparePorcess $LOGFRONT &
rm -f $LOGBACK
doPostPreparePorcess $LOGBACK

#====================== LQT Hermes ======================
elif [ $CMD = ${CMD_BACK}H ]; then

if [ $# -lt 2 ]; then
Usage
fi

if [ -d $xROOT/LoansQuickTicket/LQT ]; then
doPrepareProcess $LOGBACK
sendToHermes $LOGBACK $2 $3
else
echo
echo "Build folder not fund."
echo "Required $xROOT/LoansQuickTicket/LQT"
fi

elif [ $CMD = ${CMD_FRONT}H ]; then

if [ $# -lt 2 ]; then
Usage
fi

if [ -d $xROOT/LoansQuickTicket/LQT ]; then
doPrepareProcess $LOGFRONT
sendToHermes $LOGFRONT $2 $3
else
echo
echo "Build folder not fund."
echo "Required $xROOT/LoansQuickTicket/LQT"
fi

#====================== LWL Update - Compile Together ======================
elif [ $CMD = $CMD_LWL ]; then

if [ -d $xROOT/zTRSBackEnd ]; then
doPrepareProcess $LOGLWL $2
doPostPreparePorcess $LOGLWL
else
echo
echo "Build folder not fund."
echo "Required $xROOT/zTRSBackEnd"
fi

#====================== LWL Hermes ======================
elif [ $CMD = ${CMD_LWL}H ]; then

if [ $# -lt 2 ]; then
Usage
fi

if [ -d $xROOT/zTRSBackEnd ]; then
doPrepareProcess $LOGLWL
sendToHermes $LOGLWL $2 $3
else
echo
echo "Build folder not fund."
echo "Required $xROOT/LoansQuickTicket/LQT"
fi

#====================== LQT DB Hermes ======================
elif [ $CMD = ${CMD_LQTDBH} ]; then

if [ $# -lt 2 ]; then
Usage
fi

echo " -- checking out -- "
cp /home/sh13256/checkout.sh checkout
chmod +x ./checkout
./checkout DB >> $LOG_DB 2>&1
rm ./checkout

echo " -- sending to Hermes -- "
sendToHermes $LOG_DB $2 $3 >> $LOG_DB 2>&1

sendMail "LoansQTDB_Send_To_Hermes_${xROOT}" $LOG_DB

else

Usage
fi
iteye_20559
关注
  • 0
    点赞
  • 踩
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
专栏目录
实例解析服务部署脚本build.sh
热爱我的热爱
06-06 5706
在我们的现实生活中，我们经常面临着迁移服务的工作，对于这部分，我也是属于一个小白的一样的人员所以开始写下这篇文章，来记录一下学习过程，好的，我们开始今天的课程，如何看懂build.sh这个部署服务的脚本1.以下面这个脚本为例，我们来看下这个部署的脚本的内容#!/bin/bash #初始变量设定 set -x set -e JOB_ENV=${1} CLUSTER=`python analyze_v...
qnap-acme.sh
09-18
威联通QNAP自动续签更新SSL证书脚本（配合acme.sh使用），支持Let's Encrypt免费证书，支持域名泛解析证书，如：*.xx.com。
Xbuild
weixin_33923762的博客
11-21 696
https://github.com/zhuayi/xbuild 转载于:https://www.cnblogs.com/xsyl/p/6085828.html
探秘X-Build：高效构建工具的革新之作
最新发布
gitblog_00031的博客
04-12 448
探秘X-Build：高效构建工具的革新之作 项目地址:https://gitcode.com/codexu/x-build X-Build是一个现代化、高性能的构建工具，旨在简化和加速开发流程，为开发者提供更便捷的项目构建体验。本文将深入探讨X-Build的核心技术、应用场景及其独特优势。 项目简介 X-Build是基于GitOps理念设计的，它利用先进的编译技术和容器化策略，能够自动化处理项目的...
模块化工程构建工具 - XBuild
金属狂人
11-28 1244
Xbuild is project auto build tool, it's just a simple wrapper of GNUMake. The home page is [url]https://sourceforge.net/projects/xbuild/[/url] 1.How to install ---------------- tar -xzvf xbuild...
一次xbuild编译失败的排查
dinghui2004的博客
11-28 397
今天一个待上线服务测试完毕，需要构建CI，按照模板配置好包还原，xbuild编译，报错，错误信息如下： EtcdRegister.cs(8,15): error CS0234: The type or namespace name `LawDissector' does not exist in the namespace `Gridsum'. Are you missin...
springboot启动脚本start.sh和停止脚本 stop.sh的详细教程
08-24
Spring Boot 启动脚本 start.sh 和停止脚本 stop.sh 详细教程 本文主要介绍了 Spring Boot 启动脚本 start.sh 和停止脚本 stop.sh 的详细教程，对大家的学习或工作具有一定的参考借鉴价值。下面将详细讲解 Spring ...
tinyos.sh文件
02-26
tinyos.sh文件，在linux环境下生成，cygwin环境下可用，tinyos.sh文件总出问题的可以下载，将绝对路径修改成自己的
Ubuntu下运行.sh文件
04-02
在Ubuntu操作系统中，`.sh` 文件通常是一种shell脚本，用于执行一系列的命令或自动化任务。这类文件在Linux和类Unix系统中广泛使用。要成功地在Ubuntu上运行`.sh` 文件，你需要遵循一系列步骤，确保文件具有正确的...
startServer.sh
06-07
startServer.sh
xbuild联合编译器
08-16
xbuild联合编译器
linux中的sh脚本语法
billxin2012的专栏
12-23 3146
1 开头 程序必须以下面的行开始（必须方在文件的第一行）： #!/bin/sh 符号#!用来告诉系统它后面的参数是用来执行该文件的程序。在这个例子中我们使用/bin/sh来执行程序。 当编写脚本完成时，如果要执行该脚本，还必须使其可执行。 要使编写脚本可执行： 编译 chmod +x filename 这样才能用./filename 来运行 2 注释 在进行shell编程时
创建可执行文件build.sh
weixin_42555131的博客
06-29 8902
$echo 'sudo apt-get update' &gt;&gt; build.sh    #向build.sh文件写入内容 $chmod +x build.sh    #生成可执行程序 $./build.sh    #执行可执行程序 $nano build.sh    #编辑可执行程序...
Hbuilder 云打包发布app教程 （Android）
热门推荐
H的博客
03-22 1万+
Hbuilder X 云打包教程 （Android ） - 准备所需开发环境以及项目 Java SE Development Kit8u201（Android签名证书所需） 1. 正确安装JRE，下面将使用使用JRE自带的创建和管理数字证书的工具Keytool 2. 准备生成Android签名证书命令(命令指示符) keytool -genkey -alias ceshi -k...
IrisBuild: 一个跨平台跨语言的构建系统
Vivid Frames
06-08 3517
背景 现代的游戏引擎都支持多平台，既然要支持多平台的话，自定义的构建系统在引擎工具链上就必不可少了。比如Unity需要同时支持C#,C++语言的编译，由此引入了Jamplus以及后来自己基于Jam和C#改造的UnityBuildSystem构建系统，Unreal则基于自己的需求（UHT生成）开发了UBT；CryEngine则是基于CMake修改了一套构建系统。 游戏引擎涉及的编程语言也会比较多...
【错误解决】- Jnekins部署Vue项目脚本命令不执行
孙小凯的博客
05-15 892
问题 因为之前在弄Vue项目的jenkins自动化构建，遇到的问题！ Jenkins 部署 Vue 项目链接： Jenkins部署-vue项目 在部署Vue项目时，batch command中的 shell命令不执行。 场景 Jenkins安装在Windows系统中； batch command 中命令为 npm install npm run build：sit 但是执行完 install 之后 下面的 build 就不执行了 解决方法 在命令中加入 call 更改之后的命令为： call npm
【原创】用shell+ant构建apk
aea26044的博客
05-21 100
1 #!/bin/bash 2 ######################################################################### 3 ## $PRODVERSION:产品发布版本号码，在发布产品前由产品经理确认。 4 ## $BRANCH :代码版本分支，与stash上相同 5 ## $SECTION:Al...
HBuilder X打包流程
weixin_41850709的博客
10-23 3327
HBuilder X打包流程 App包名：Android应用包名，推荐使用反向域名风格的字符串，如“com.domainname.appname”； 证书别名：生成证书时使用-alias参数设置的证书别名； 私钥密码：生成证书时使用的keystore密码； 证书文件：生成证书时使用-keystore参数设置的证书保存路径； *获取证书文件 生成Android签名证书，确保电脑上安装了JRE...
详谈git checkout命令
飘过的春风
10-07 5807
在日常的git操作中，git checkout——检出，是我们的常用命令。最为常用的两种情形是创建分支和切换分支。 在下面的命令中，使用了一些简写，在这里说明一下： git st # git status git ci # git commit git br # git branch git co # git checkout git mg # git merge git line
Oracle11g安装：详解root.sh脚本的作用
"Oracle 11g安装过程中，运行root.sh脚本是关键步骤，它主要负责设置系统级别的权限和配置，确保数据库服务能够正确运行。root.sh脚本通常位于Oracle软件目录下的特定路径，有两个同名文件，但功能略有不同。本文...

“相关推荐”对你有帮助么？

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值