一,概述
List将元素按顺序储存在链表中.与向量(vectors)相比,它允许快速的插入和删除,但是随机访问却比较慢。
list 不仅是一个双向链表,而且是一个环状双向链表
二,使用
#include <list>
using namespace std;
注意:list是一个“前闭后开”的区间,即
list<int> lt(10,6); //建立10个元素为6的链表
cout<<*(lt.end()) ; //输出乱码
cout<<*(--lt.end());//输出最后一个元素 6
三,主要函数
assign()给list赋值
back()返回最后一个元素
begin() 返回指向第一个元素的迭代器
clear()删除所有元素
empty()如果list是空的则返回true
end() 返回末尾的迭代器
erase()删除一个元素
front()返回第一个元素
get_allocator()返回list的配置器
insert(iteator,10) 插入一个元素10到元素迭代其 iteator之前,一般iteator=find(list.begin(),list.end(),3)
max_size() 返回list能容纳的最大元素数量
merge(list<T> &x) 将x合并到 *this
pop_back()删除最后一个元素
pop_front() 删除第一个元素
push_back() 在list的末尾添加一个元素
push_front()在list的头部添加一个元素
rbegin()返回指向第一个元素的逆向迭代器
remove()从list删除元素
remove_if()按指定条件删除元素
rend()指向list末尾的逆向迭代器
resize()改变list的大小
reverse()把list的元素倒转
size()返回list中的元素个数
sort()给list排序
splice(iterator position ,list &x) // list.splice(position,list2) //list2合并到list中position 之前
splice(iterator position ,list &x,iterator i) // 元素插入到list中position 之前
splice(iterator position ,list &x,iterator first,iterator last) //first - last 之间的元素插入到 list中position之前
swap() 交换两个list
unique() 删除list中重复的元素
四,示例
#include <iostream>
#include <list>
#include <numeric>
#include <algorithm>
using namespace std;
//创建一个list容器的实例LISTINT
typedef list<int> LISTINT;
//创建一个list容器的实例LISTCHAR
typedef list<char> LISTCHAR;
int main(void)
{
LISTINT listOne;//创建一个名为listOne的list对象
LISTINT::iterator i;//声明i为迭代器
listOne.push_front (2);//从list容器前面添加数据
listOne.push_front (1);
listOne.push_back (3);//从list容器后面添加数据
listOne.push_back (4);
cout<<"listOne.begin()--- listOne.end():"<<endl;//从后面显示数据
for (i = listOne.begin(); i != listOne.end(); ++i)
cout << *i << ""<<endl;
//从后向后显示listOne中的数据
LISTINT::reverse_iterator ir;
cout<<"listOne.rbegin()---listOne.rend():"<<endl;
for (ir =listOne.rbegin(); ir!=listOne.rend();ir++) {
cout << *ir << "";
}
cout << endl;
//使用STL的accumulate(累加)算法
int result = accumulate(listOne.begin(), listOne.end(),0);
cout<<"Sum="<<result<<endl;
cout<<"------------------"<<endl;
//--------------------------
//用list容器处理字符型数据
//--------------------------
//用LISTCHAR创建一个名为listOne的list对象
LISTCHAR listTwo;
//声明i为迭代器
LISTCHAR::iterator j;
//从前面向listTwo容器中添加数据
listTwo.push_front ('A');
listTwo.push_front ('B');
//从后面向listTwo容器中添加数据
listTwo.push_back ('x');
listTwo.push_back ('y');
//从前向后显示listTwo中的数据
cout<<"listTwo.begin()---listTwo.end():"<<endl;
for (j = listTwo.begin(); j != listTwo.end(); ++j)
cout << char(*j) <<" ";
cout << endl;
//使用STL的max_element算法求listTwo中的最大元素并显示
j=max_element(listTwo.begin(),listTwo.end());
cout << "The maximum element in listTwo is:"<<char(*j)<<endl;
return 0;
}
五,示例
#include <iostream>
#include <list>
using namespace std;
typedef list<int> INTLIST; //定义双向链表
void put_list(INTLIST list,const char *name)//从前向后显示list队列的全部元素
{
INTLIST::iterator plist;
cout << "The contents of" << name << " : ";
for(plist = list.begin(); plist != list.end(); plist++)
cout << *plist << " ";
cout<<endl;
}
int main(void)
{
INTLIST list1; //list1对象初始为空
INTLIST list2(10,6); //list2对象最初有10个值为6的元素
INTLIST list3(list2.begin(),--list2.end());//list3对象最初有9个值为6的元素
INTLIST::iterator i; //声明一个名为i的双向迭代器
put_list(list1,"list1"); //从前向后显示各list对象的元素
put_list(list2,"list2");
put_list(list3,"list3");
list1.push_back(2);//从list1序列后面添加两个元素
list1.push_back(4);
cout<<"list1.push_back(2) and list1.push_back(4):"<<endl;
put_list(list1,"list1");
list1.push_front(5);//从list1序列前面添加两个元素
list1.push_front(7);
cout<<"list1.push_front(5) andlist1.push_front(7):"<<endl;
put_list(list1,"list1");
list1.insert(++list1.begin(),3,9);//在list1序列中间插入数据 3个9
cout<<"list1.insert(list1.begin()+1,3,9):"<<endl;
put_list(list1,"list1");
cout<<"list1.front()="<<list1.front()<<endl;//测试引用类函数
cout<<"list1.back()="<<list1.back()<<endl;
list1.pop_front();//从list1序列的前后各移去一个元素
list1.pop_back();
cout<<"list1.pop_front() and list1.pop_back():"<<endl;
put_list(list1,"list1");
list1.erase(++list1.begin());//清除list1中的第2个元素
cout<<"list1.erase(++list1.begin()):"<<endl;
put_list(list1,"list1");
list2.assign(8,1);//对list2赋值并显示
cout<<"list2.assign(8,1):"<<endl;
put_list(list2,"list2");
cout<<"list1.max_size(): "<<list1.max_size()<<endl;//显示序列的状态信息
cout<<"list1.size(): "<<list1.size()<<endl;
cout<<"list1.empty(): "<<list1.empty()<<endl;
put_list(list1,"list1");//list序列容器的运算
put_list(list3,"list3");
cout<<"list1>list3: "<<(list1>list3)<<endl;
cout<<"list1<list3: "<<(list1<list3)<<endl;
list1.sort();//对list1容器排序
put_list(list1,"list1");
list1.splice(++list1.begin(), list3);//将list3结合到 list1中 ++list1.begin()之前
put_list(list1,"list1");
put_list(list3,"list3");
return 0;
}
输出:
The contents oflist1 :
The contents oflist2 : 6 6 6 6 6 6 6 6 6 6
The contents oflist3 : 6 6 6 6 6 6 6 6 6
list1.push_back(2) and list1.push_back(4):
The contents oflist1 : 2 4
list1.push_front(5) andlist1.push_front(7):
The contents oflist1 : 7 5 2 4
list1.insert(list1.begin()+1,3,9):
The contents oflist1 : 7 9 9 9 5 2 4
list1.front()=7
list1.back()=4
list1.pop_front() and list1.pop_back():
The contents oflist1 : 9 9 9 5 2
list1.erase(++list1.begin()):
The contents oflist1 : 9 9 5 2
list2.assign(8,1):
The contents oflist2 : 1 1 1 1 1 1 1 1
list1.max_size(): 357913941
list1.size(): 4
list1.empty(): 0
The contents oflist1 : 9 9 5 2
The contents oflist3 : 6 6 6 6 6 6 6 6 6
list1>list3: 1
list1<list3: 0
The contents oflist1 : 2 5 9 9
The contents oflist1 : 2 6 6 6 6 6 6 6 6 6 5 9 9
The contents oflist3 :
四,补充:STL标准函数find进行vector 、list链表查找
#include <vector>
#include <algorithm>
#include <iostream>
using namespace std;
class example
{
public:
example(int val) // 构造函数
{
i = val;
}
bool operator==(example const & rhs) //操作符重载
{
return (i == rhs.i) ? true : false;
}
private:
int i;
};
int main(void)
{
vector<example> ve;
ve.push_back(1);
vector<example>::iterator it;
example elem(1);
it = find(ve.begin(), ve.end(), elem);
cout<<boolalpha<<(*it == elem); //boolalpha 用符号形式表示真假
return 0;
}