multicast(一) (转自network programming for microsoft windows, second edition.)

 

看完这个就知道IGMPV3怎么实现了 。。。
Multicasting with Setsockopt

Originally, the only way to join or leave a multicast group was via the setsockopt API. Winsock 2 introduces a protocol-independent method of multicasting with the WSAJoinLeaf API (discussed in the next section), but as we will soon see, the setsockopt method is much more flexible even though it is more closely tied to the protocol being used.

IPv4

There are two socket options that control joining and leaving groups: IP_ADD_MEMBERSHIP and IP_DROP_MEMBERSHIP. The socket option level is IPPROTO_IP. The input parameter is a struct ip_mreq structure, which is defined as

struct ip_mreq {
   struct in_addr imr_multiaddr;   /* IP multicast address of group */
   struct in_addr imr_interface;   /* local IP address of interface */
};

The imr_multiaddr field is the 32-bit IPv4 address of the multicast group in network-byte order and imr_interface is the 32-bit IPv4 address of the local interface on which to join the multicast group (also specified in network-byte order). The following code snippet illustrates joining a multicast group.

SOCKET			      s;
SOCKADDR_IN    localif;
struct ip_mreq mreq;

s = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP);

localif.sin_family = AF_INET;
localif.sin_port   = htons(5150);
localif.sin_addr.s_addr = htonl(INADDR_ANY);
bind(s, (SOCKADDR *)&localif, sizeof(localif));

mreq.imr_interface.s_addr = inet_addr("157.124.22.104");
mreq.imr_multiaddr.s_addr = inet_addr("234.5.6.7");

setsockopt(s, IPPROTO_IP, IP_ADD_MEMBERSHIP, (char *)&mreq, 
sizeof(mreq));

Note that the socket should be bound to the wildcard address (INADDR_ANY) before joining the group. In this example, the socket is joined to the multicast group 234.5.6.7 on the local interface 157.124.22.104. Multiple groups may be joined on the same socket on the same or different interface.

Once one or more multicast groups are joined, the IP_DROP_MEMBERSHIP option is used to leave a particular group. Again, the struct ip_mreq structure is the input parameter. The local interface and multicast group to drop are the arguments of the structure. For example, given the code sample you just saw, the following code drops the multicast group previously joined:

// Join the group as shown above

mreq.imr_interface.s_addr = inet_addr("157.124.22.104");
mreq.imr_multiaddr.s_addr = inet_addr("234.5.6.7");

setsockopt(s, IPPROTO_IP, IP_DROP_MEMBERSHIP, (char *)&mreq, 
sizeof(mreq));

Finally, if the application exits or the socket is closed, any multicast groups joined by that process or socket are cleaned up.

note

An IPv4 multicasting sample that uses setsockopt is provided on the companion CD in the directory IP-SETSOCKOPT.

IPv4 with Multicast Sourcing

IP source multicasting is available on systems that support the IGMPv3 protocol and allows a socket to join a multicast group on an interface while specifying a set of source addresses to accept data from. There are two possible modes in which a socket may join a group. The first is the INCLUDE mode, in which a socket joins a group specifying N number of valid source addresses to accept data from. The other mode is EXCLUDE, in which a socket joins a group specifying to accept data from anyone except the N source addresses listed. Depending on which mode is used, the socket options differ.

To join a multicast group while using the INCLUDE mode, the socket options are IP_ADD_SOURCE_MEMBERSHIP and IP_DROP_SOURCE_MEMBERSHIP. The first step is to add one or more sources. Both socket options take a struct ip_mreq_source structure, which is defined as

struct ip_mreq_source {
   struct in_addr imr_multiaddr;   /* IP multicast address of group */
   struct in_addr imr_sourceaddr;  /* IP address of source          */
   struct in_addr imr_interface;   /* local IP address of interface */
};

The imr_multiaddr and imr_interface fields are the same as in the struct ip_mreq structure. The new field imr_sourceaddr specifies the 32-bit IP address of the source to accept data from. If there are multiple valid sources, then the IP_ADD_SOURCE_MEMBERSHIP is called again with the same multicast address and interface with the other valid source. The following code sample joins a multicast group on a local interface with two valid sources:

SOCKET                s;
SOCKADDR_IN           localif;
struct ip_mreq_source mreqsrc;

s = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP);

localif.sin_family = AF_INET;
localif.sin_port   = htons(5150);
localif.sin_addr.s_addr = htonl(INADDR_ANY);
bind(s, (SOCKADDR *)&localif, sizeof(localif));

mreqsrc.imr_interface.s_addr = inet_addr("157.124.22.104");
mreqsrc.imr_multiaddr.s_addr = inet_addr("234.5.6.7");
mreqsrc.imr_sourceaddr.s_addr = inet_addr("172.138.104.10");

setsockopt(s, IPPROTO_IP, IP_ADD_SOURCE_MEMBERSHIP,
 		(char *)&mreqsrc, sizeof(mreqsrc));

mreqsrc.imr_sourceaddr.s_addr = inet_addr("172.141.87.101");

setsockopt(s, IPPROTO_IP, IP_ADD_SOURCE_MEMBERSHIP,
		(char *)&mreqsrc, sizeof(mreqsrc));

To remove a source from the INCLUDE set, the IP_DROP_SOURCE_ MEMBERSHIP is called with the multicast group, local interface, and source to be removed.

To join a multicast group that excludes one or more sources, the multicast group is joined with IP_ADD_MEMBERSHIP. Using IP_ADD_MEMBERSHIP to join a group is equivalent to joining a group in the EXCLUDE mode except that no one is excluded. Data sent to the joined group is accepted regardless of the source. Once the group is joined, then the IP_BLOCK_SOURCE option is called to exclude the given source. Again, the struct ip_mreq_source structure is the input parameter that specifies the source to block. The following example joins a group and then excludes a single source:

SOCKET                s;
SOCKADDR_IN           localif;
struct ip_mreq        mreq;
struct ip_mreq_source mreqsrc;

s = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP);

localif.sin_family = AF_INET;
localif.sin_port   = htons(5150);
localif.sin_addr.s_addr = htonl(INADDR_ANY);
bind(s, (SOCKADDR *)&localif, sizeof(localif));

// Join a group - the filter is EXCLUDE none
mreq.imr_interface.s_addr = inet_addr("157.124.22.104");
mreq.imr_multiaddr.s_addr = inet_addr("234.5.6.7");

setsockopt(s, IPPROTO_IP, IP_ADD_MEMBERSHIP, (char *)&mreq, 
 		sizeof(mreq));

mreqsrc.imr_interface = mreq.imr_interface;
mreqsrc.imr_multiaddr = mreq.imr_multiaddr;
mreqsrc.imr_sourceaddr.s_addr = inet_addr("172.138.104.10");

setsockopt(s, IPPROTO_IP, IP_BLOCK_SOURCE, (char *)&mreqsrc, 
 		sizeof(mreqsrc));

If after some point, the application wishes to accept data from a source previously blocked, it may remove that source from the exclude set by calling setsockopt with IP_UNBLOCK_SOURCE. A struct ip_mreq_source is the input parameter that specifies the source to accept data from.

note

An IPv4 source multicasting sample that uses setsockopt is provided on the companion CD in the directory IP-SOURCE.

 

  • 0
    点赞
  • 1
    收藏
    觉得还不错? 一键收藏
  • 5
    评论
评论 5
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值