errno全局变量各值含义

原创 2013年07月15日 09:17:01

Linux下最常见的就是errno了,一般当发生错误时便会给全局变量errno赋值,其所有可能的值可查看linux的库文件,以下是查看linux v3.0的结果:


/usr/include/asm-generic/errno-base.h

#ifndef _ASM_GENERIC_ERRNO_BASE_H
#define _ASM_GENERIC_ERRNO_BASE_H

#define EPERM        1  /* Operation not permitted */
#define ENOENT       2  /* No such file or directory */
#define ESRCH        3  /* No such process */
#define EINTR        4  /* Interrupted system call */
#define EIO      5  /* I/O error */
#define ENXIO        6  /* No such device or address */
#define E2BIG        7  /* Argument list too long */
#define ENOEXEC      8  /* Exec format error */
#define EBADF        9  /* Bad file number */
#define ECHILD      10  /* No child processes */
#define EAGAIN      11  /* Try again */
#define ENOMEM      12  /* Out of memory */
#define EACCES      13  /* Permission denied */
#define EFAULT      14  /* Bad address */
#define ENOTBLK     15  /* Block device required */
#define EBUSY       16  /* Device or resource busy */
#define EEXIST      17  /* File exists */
#define EXDEV       18  /* Cross-device link */
#define ENODEV      19  /* No such device */
#define ENOTDIR     20  /* Not a directory */
#define EISDIR      21  /* Is a directory */
#define EINVAL      22  /* Invalid argument */
#define ENFILE      23  /* File table overflow */
#define EMFILE      24  /* Too many open files */
#define ENOTTY      25  /* Not a typewriter */
#define ETXTBSY     26  /* Text file busy */
#define EFBIG       27  /* File too large */
#define ENOSPC      28  /* No space left on device */
#define ESPIPE      29  /* Illegal seek */
#define EROFS       30  /* Read-only file system */
#define EMLINK      31  /* Too many links */
#define EPIPE       32  /* Broken pipe */
#define EDOM        33  /* Math argument out of domain of func */
#define ERANGE      34  /* Math result not representable */

#endif


/usr/include/asm-generic/errno.h


#ifndef _ASM_GENERIC_ERRNO_H
#define _ASM_GENERIC_ERRNO_H

#include <asm-generic/errno-base.h>

#define EDEADLK     35  /* Resource deadlock would occur */
#define ENAMETOOLONG    36  /* File name too long */
#define ENOLCK      37  /* No record locks available */
#define ENOSYS      38  /* Function not implemented */
#define ENOTEMPTY   39  /* Directory not empty */
#define ELOOP       40  /* Too many symbolic links encountered */
#define EWOULDBLOCK EAGAIN  /* Operation would block */
#define ENOMSG      42  /* No message of desired type */
#define EIDRM       43  /* Identifier removed */
#define ECHRNG      44  /* Channel number out of range */
#define EL2NSYNC    45  /* Level 2 not synchronized */
#define EL3HLT      46  /* Level 3 halted */
#define EL3RST      47  /* Level 3 reset */
#define ELNRNG      48  /* Link number out of range */
#define EUNATCH     49  /* Protocol driver not attached */
#define ENOCSI      50  /* No CSI structure available */
#define EL2HLT      51  /* Level 2 halted */
#define EBADE       52  /* Invalid exchange */
#define EBADR       53  /* Invalid request descriptor */
#define EXFULL      54  /* Exchange full */
#define ENOANO      55  /* No anode */
#define EBADRQC     56  /* Invalid request code */
#define EBADSLT     57  /* Invalid slot */

#define EDEADLOCK   EDEADLK

#define EBFONT      59  /* Bad font file format */
#define ENOSTR      60  /* Device not a stream */
#define ENODATA     61  /* No data available */
#define ETIME       62  /* Timer expired */
#define ENOSR       63  /* Out of streams resources */
#define ENONET      64  /* Machine is not on the network */
#define ENOPKG      65  /* Package not installed */
#define EREMOTE     66  /* Object is remote */
#define ENOLINK     67  /* Link has been severed */
#define EADV        68  /* Advertise error */
#define ESRMNT      69  /* Srmount error */
#define ECOMM       70  /* Communication error on send */
#define EPROTO      71  /* Protocol error */
#define EMULTIHOP   72  /* Multihop attempted */
#define EDOTDOT     73  /* RFS specific error */
#define EBADMSG     74  /* Not a data message */
#define EOVERFLOW   75  /* Value too large for defined data type */
#define ENOTUNIQ    76  /* Name not unique on network */
#define EBADFD      77  /* File descriptor in bad state */
#define EREMCHG     78  /* Remote address changed */
#define ELIBACC     79  /* Can not access a needed shared library */
#define ELIBBAD     80  /* Accessing a corrupted shared library */
#define ELIBSCN     81  /* .lib section in a.out corrupted */
#define ELIBMAX     82  /* Attempting to link in too many shared libraries */
#define ELIBEXEC    83  /* Cannot exec a shared library directly */
#define EILSEQ      84  /* Illegal byte sequence */
#define ERESTART    85  /* Interrupted system call should be restarted */
#define ESTRPIPE    86  /* Streams pipe error */
#define EUSERS      87  /* Too many users */
#define ENOTSOCK    88  /* Socket operation on non-socket */
#define EDESTADDRREQ    89  /* Destination address required */
#define EMSGSIZE    90  /* Message too long */
#define EPROTOTYPE  91  /* Protocol wrong type for socket */
#define ENOPROTOOPT 92  /* Protocol not available */
#define EPROTONOSUPPORT 93  /* Protocol not supported */
#define ESOCKTNOSUPPORT 94  /* Socket type not supported */
#define EOPNOTSUPP  95  /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT    96  /* Protocol family not supported */
#define EAFNOSUPPORT    97  /* Address family not supported by protocol */
#define EADDRINUSE  98  /* Address already in use */
#define EADDRNOTAVAIL   99  /* Cannot assign requested address */
#define ENETDOWN    100 /* Network is down */
#define ENETUNREACH 101 /* Network is unreachable */
#define ENETRESET   102 /* Network dropped connection because of reset */
#define ECONNABORTED    103 /* Software caused connection abort */
#define ECONNRESET  104 /* Connection reset by peer */
#define ENOBUFS     105 /* No buffer space available */
#define EISCONN     106 /* Transport endpoint is already connected */
#define ENOTCONN    107 /* Transport endpoint is not connected */
#define ESHUTDOWN   108 /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS    109 /* Too many references: cannot splice */
#define ETIMEDOUT   110 /* Connection timed out */
#define ECONNREFUSED    111 /* Connection refused */
#define EHOSTDOWN   112 /* Host is down */
#define EHOSTUNREACH    113 /* No route to host */
#define EALREADY    114 /* Operation already in progress */
#define EINPROGRESS 115 /* Operation now in progress */
#define ESTALE      116 /* Stale NFS file handle */
#define EUCLEAN     117 /* Structure needs cleaning */
#define ENOTNAM     118 /* Not a XENIX named type file */
#define ENAVAIL     119 /* No XENIX semaphores available */
#define EISNAM      120 /* Is a named type file */
#define EREMOTEIO   121 /* Remote I/O error */
#define EDQUOT      122 /* Quota exceeded */

#define ENOMEDIUM   123 /* No medium found */
#define EMEDIUMTYPE 124 /* Wrong medium type */
#define ECANCELED   125 /* Operation Canceled */
#define ENOKEY      126 /* Required key not available */
#define EKEYEXPIRED 127 /* Key has expired */
#define EKEYREVOKED 128 /* Key has been revoked */
#define EKEYREJECTED    129 /* Key was rejected by service */

/* for robust mutexes */
#define EOWNERDEAD  130 /* Owner died */
#define ENOTRECOVERABLE 131 /* State not recoverable */

#endif


                

errno的值的解释

ifndef _I386_ERRNO_H #define _I386_ERRNO_H #define EPERM 1 /* Operation not permitted */ #define ...
  • petershina
  • petershina
  • 2012-09-07 19:46:44
  • 7381

如何在Linux实现自定义的errno

如何在Linux实现自定义的errno问题引入上个月我在知乎问了一个问题 如何用C实现一个简单的线程安全的errno? 然而因为项目的问题,最后不了了之了回顾再次回过头研究了这个问题,我还是对多线...
  • toudsour
  • toudsour
  • 2017-03-28 17:55:20
  • 480

C++那些细节--extern关键字&&全局变量定义问题

最近在学Lua,关于Lua编译的地方,由于Lua是用C语言写的,在C++中使用C语言的函数,需要使用extern "C“编译才能过,之前貌似没有接触过这方面的知识,写个blog纪念一下,顺便整理一下e...
  • puppet_master
  • puppet_master
  • 2015-08-16 18:06:00
  • 2940

errno详解

由于errno的重要性,在这里翻译一下Linux中man手册关于errno的内容以及errno涉及的要点注意点1 就像errno的名字一样,它是最后一个错误的编号,因此要小心在查看错误之前又出现了新...
  • xtydtc
  • xtydtc
  • 2017-05-18 22:42:39
  • 2691

linux 的errno定义

当linux中的C api函数发生异常时,一般会将errno变量(需include errno.h)赋一个整数值,不同的值表示不同的含义,可以通过查看该值推测出错的原因,在实际编程中用这一招解决了不少...
  • zhu114wei
  • zhu114wei
  • 2012-03-13 17:04:36
  • 1295

linux 下各errno的含义

124 EMEDIUMTYPE   Wrong medium type   123 ENOMEDIUM     No medium found   122 EDQUOT        Disk q...
  • ling459903347
  • ling459903347
  • 2014-05-23 14:37:34
  • 724

Linux下write、read方式

一旦,我们建立好了tcp连接之后,我们就可以把得到的fd当作文件描述符来使用。 由此网络程序里最基本的函数就是read和write函数了。 ssize_t write(int fd, const vo...
  • xxgxgx
  • xxgxgx
  • 2015-06-24 20:24:49
  • 286

Linux编程之errno

原文出处:http://mylinuxbook.com/error-handling-in-c-programming-on-linux/ 本文
  • zqxnum1
  • zqxnum1
  • 2014-11-12 19:42:35
  • 2948

linux errno 值的含义

http://pgh-panda.blog.163.com/blog/static/477723492010827102244263/   #ifndef _I386_ERRNO_H #defi...
  • sleeproy
  • sleeproy
  • 2011-08-13 10:59:04
  • 491

错误代码errno值的含义

 查看错误代码errno是调试程序的一个重要方法。当C api函数发生异常时,一般会将errno变量(需include errno.h)赋一个整数值,不同的值表示不同的含义,可以通过查看该值推测出错的...
  • jyxx_117
  • jyxx_117
  • 2009-08-03 22:35:00
  • 703
收藏助手
不良信息举报
您举报文章:errno全局变量各值含义
举报原因:
原因补充:

(最多只允许输入30个字)