imx6 修改uboot log串口输出

1， 修改include/configs/mx6sabresd.h

/*

#define CONFIG_MXC_UART_BASE UART1_BASE

#define CONFIG_CONSOLE_DEV "ttymxc0"

*/

#define CONFIG_MXC_UART_BASE UART2_BASE

#define CONFIG_CONSOLE_DEV "ttymxc1"

 

2,修改\board\freescale\mx6sabresd\mx6sabresd.c

添加

static iomux_v3_cfg_t const uart2_pads[] = {

MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),

MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),

};

 

static void setup_iomux_uart(void)

{

// imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));

//add

imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));

}