【RV1126】瑞芯微RV1126开发板双网口问题

今天新拿到瑞芯微RV1126的开发板，是双网口双百兆接口，内存为2G，emmc flash为32G，一开始无法分辨物理接口和系统的eth是对应的，遂想用ethtool工具来查看网速，发现：

ethtool eth0 # 可以正常返回网络相关信息及当前连接速率

root@aioter:~# ethtool eth0
Settings for eth0:
	Supported ports: [ TP AUI BNC MII FIBRE ]
	Supported link modes:   10baseT/Half 10baseT/Full 
	                        100baseT/Half 100baseT/Full 
	                        1000baseT/Full 
	Supported pause frame use: Symmetric Receive-only
	Supports auto-negotiation: Yes
	Supported FEC modes: Not reported
	Advertised link modes:  10baseT/Half 10baseT/Full 
	                        100baseT/Half 100baseT/Full 
	                        1000baseT/Full 
	Advertised pause frame use: No
	Advertised auto-negotiation: Yes
	Advertised FEC modes: Not reported
	Link partner advertised link modes:  10baseT/Half 10baseT/Full 
	                                     100baseT/Half 100baseT/Full 
	                                     1000baseT/Full 
	Link partner advertised pause frame use: Symmetric Receive-only
	Link partner advertised auto-negotiation: Yes
	Link partner advertised FEC modes: Not reported
	Speed: 1000Mb/s
	Duplex: Full
	Port: MII
	PHYAD: 0
	Transceiver: internal
	Auto-negotiation: on
	Supports Wake-on: ug
	Wake-on: d
	Current message level: 0x0000003f (63)
			       drv probe link timer ifdown ifup
	Link detected: yes



ethtool eth1 # 不能正常显示当前速率，只显示为：

current message level ：0x00000007

然后经过查询资料解答为:

因为ethtool通常用于查询物理网络接口（如以太网接口）的速率和其他属性，而USB转换器通常被视为虚拟接口。

那么如果要查询usb转换后的网速呢?

通过查看sysfs中的信息

ls /sys/class/net/
cat /sys/class/net/<interface_name>/speed

请确保替换命令中的 <interface_name> 为你USB转换的网络适配器的名称。

如果这些方法仍无法解决问题，请检查USB转换器制造商的文档，以确定如何查询其速率信息。