T6911UXE是一款高性能HDMI2.0到MIPI DSI/CSI转换器

1. 描述

LT6911UXE是一款高性能HDMI2.0到MIPI DSI/CSI转换器，适用于VR，智能手机，显示应用。

HDMI2.0输入支持高达6Gbps的数据速率，为4k@60Hz视频提供足够的带宽。HDCP2.3也支持数据解密。

对于MIPI DSI/CSI输出，LT6911UXE具有可配置的单端口或双端口MIPI DSI/CSI，具有1个高速时钟通道和1~4个高速数据通道，最大运行速度为2.5Gbps/lane，可支持总带宽高达20Gbps。LT6911UXE支持突发模式DSI视频数据传输，还支持灵活的视频数据映射路径。提供I2S和SPDIF两个数字音频输出接口。I2S接口支持2-ch LPCM, SPDIF接口支持2-ch LPCM或压缩音频，最大采样率均为192kHz。

该设备能够通过集成的微处理器实现自动操作，该微处理器使用嵌入式SPI闪存进行固件存储。系统控制也可通过配置I2C从接口。

2. 特性

•HDMI2.0接收器

•单/双端口MIPI DSI/CSI发射器

•数字音频输出

3.应用程序

•移动系统

•显示

•虚拟现实

1. Description

The LT6911UXE is a high performance HDMI2.0 to MIPI DSI/CSI converter for VR, Smart phone, Display applications.

The HDMI2.0 input supports data rate up to 6Gbps which provides sufficient bandwidth for 4k@60Hz video. Also HDCP2.3 is supported for data decryption.

For MIPI DSI/CSI output, LT6911UXE features configurable single-port or dual-port MIPI DSI/CSI with 1 high-speed clock lane, and 1~4 high-speed data lanes operating at maximum 2.5Gbps/lane, which can support a total bandwidth of up to 20Gbps. LT6911UXE supports burst mode DSI video data transferring, also supports flexible video data mapping path. Two digital audio output interfaces are available, I2S and SPDIF. The I2S interface supports 2-ch LPCM and the SPDIF interface supports 2-ch LPCM or compressed audio, both at maximum 192kHz sample rate.

The device is capable of automatic operation which is enabled by an integrated microprocessor that uses an embedded SPI flash for firmware storage. System control is also available through the configuration I2C slave interface. 

2. Features

• HDMI2.0 Receiver

• Single/Dual-Port MIPI DSI/CSI Transmitter

• Digital Audio Output

3. Applications

• Mobile system

• Display

• VR