华硕笔记本电脑的风扇转速正常是多少

本文介绍华硕笔记本电脑风扇的正常转速,并提供多种调整方法,包括通过BIOS设置、手动调速电机及使用特定软件进行调节。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

有很多朋友反映他们的华硕笔记本电脑风扇速度问题,与过去相比不是很正常,有时不动,热排放不好,所以我想知道华硕笔记本电脑如何调整散热器风扇。接下来,小边将分享华硕笔记本电脑风扇的正常速度及其控制方法。

专用工具/原材料:

系统版本:windows7系统软件

品牌型号:华硕飞行堡垒7

方法/流程:

一.笔记本散热器转速正常多少?

在调整散热器风扇之前,我们应该弄清楚笔记本电脑散热器风扇是否有问题。只需在电脑上操作鲁大师或360硬件大师等手机软件即可自动识别散热器风扇。一般来说,笔记本电脑散热器风扇是针对它的CPU热值确定,CPU还有热传感器,风扇的转速比因条件而异。一般来说,CPU如果温度正常,散热器风扇将在2000-2500转/min上下比较正常。除了一些,比如用笔记本玩一些高配置的网络游戏,CPU温度可能超过60度,散热器风扇将达到5000转/min,这样的事情也很正常。

二.华硕笔记本风扇转速调节

方法1:进入华硕bios调整系统中的转速比

1.开机,期间不断按压Del键进到BIOS设置,然后用左右键盘按钮选择PCHealthStatus,在其中CPUSmartFanControl是风扇调速,选择enabled打开变速效果。

2.设置CPUTargetTemp=50度,CPUToleranceTemp=5度,CPUFanStopPWM(%)=30%;存储设置后,计算机重启再次进入BIOS中,查询“PCHealthStatus”。

3.仔细观察风扇值,显著观察CPU智能风扇的功能正在发生。修改设置:CPUFanStopPWM(%)=储存后再进入10%BIOS中,CPU风扇转速比下降到1300多转。然后笔记本电脑会根据环境温度调整转速比。

4.再次修改设置:CPUFanStopPWM(%)=储存后再进入60%BIOS中,CPU风扇转速比再次下降到2200转左右。当温度下降到45~55度段下限值45度后,CPU速比逐渐自动降低。

方法2:手动调速电机调节

笔记本电脑散热器风扇的调整可通过手动调速电机完成。将控制器串接收到热管散热器的风扇电源插头中,然后摇动旋钮,调整到3500到5200转中间。整个过程涉及拆卸,不了解的网民必须让专业人员实际操作。

方法3:一些华硕知名品牌可以进入GamingCenter内调节

华硕ZX53系列产品如ZX53VW笔记本电脑适用于调整风机速率百分比。操作模式如下:根据Cortana检索并进到【GamingCenter】,在【打开专用工具程序流程】栏中搜索【系统软件风扇控制】。点击箭头符号后,可以拖动操作条选择【AUTO】全自动模式,或选择1%到【MAX】(100%)。

方法4:可使用bios里的Monitor选项调节散热器风扇

华硕电脑主板可以通过BIOS里的Monitor列表中设定CPU风扇转速比。实际设置流程如下:

  1. 华硕电脑开机后按压“DEL”或“F2”进到BIOS。

2.根据电脑键盘上右键盘按钮选择Monitor。

3.Monitor菜单栏中的CPUFANSpeed选择项即是CPU风扇转速比的人物设置。设置后点击F10键即可存储BIOS设间设置,设备重启。

笔记本风扇控制 ---------------------------------------- 09 November 2006. Summary of changes for version 20061109: 1) ACPI CA Core Subsystem: Optimized the Load ASL operator in the case where the source operand is an operation region. Simply map the operation region memory, instead of performing a bytewise read. (Region must be of type SystemMemory, see below.) Fixed the Load ASL operator for the case where the source operand is a region field. A buffer object is also allowed as the source operand. BZ 480 Fixed a problem where the Load ASL operator allowed the source operand to be an operation region of any type. It is now restricted to regions of type SystemMemory, as per the ACPI specification. BZ 481 Additional cleanup and optimizations for the new Table Manager code. AcpiEnable will now fail if all of the required ACPI tables are not loaded (FADT, FACS, DSDT). BZ 477 Added #pragma pack(8/4) to acobject.h to ensure that the structures in this header are always compiled as aligned. The ACPI_OPERAND_OBJECT has been manually optimized to be aligned and will not work if it is byte-packed. Example Code and Data Size: These are the sizes for the OS- independent acpica.lib produced by the Microsoft Visual C++ 6.0 32- bit compiler. The debug version of the code includes the debug output trace mechanism and has a much larger code and data size. Previous Release: Non-Debug Version: 78.1K Code, 17.1K Data, 95.2K Total Debug Version: 155.4K Code, 63.1K Data, 218.5K Total Current Release: Non-Debug Version: 77.9K Code, 17.0K Data, 94.9K Total Debug Version: 155.2K Code, 63.1K Data, 218.3K Total 2) iASL Compiler/Disassembler and Tools: Fixed a problem where the presence of the _OSI predefined control method within complex expressions could cause an internal compiler error. AcpiExec: Implemented full region support for multiple address spaces. SpaceId is now part of the REGION object. BZ 429 ---------------------------------------- 11 Oc
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值