H3C WX3024

aux模式登录，看到以下说明在无线引擎上
<H3C>dir
Directory of flash:/

   0     -rw-  14969756  Aug 08 2008 20:00:00   WX3000-CMW520-B3103.bin

54610 KB total (39989 KB free)

<H3C>
切换到交换引擎：
<H3C>oap connect slot 0
Connected to OAP!
<CQ_PXL_WX3024_1>dir
Directory of unit1>flash:/

   1 (*)   -rw-      3066  Apr 07 2000 08:25:14   startup.cfg

6858 KB total (6852 KB free)

(*) -with main attribute   (b) -with backup attribute
(*b) -with both main and backup attribute

<CQ_PXL_WX3024_1>
ctrl＋k可以退出到无线引擎。
无线引擎也需要配置管理ip及静态路由：
interface Vlan-interface1
 ip address 10.1.1.118 255.255.255.0
#
interface GigabitEthernet1/0/1
#
 ip route-static 0.0.0.0 0.0.0.0 10.1.1.16

之后在无线引擎里面就可以使用telnet和ftp啦！

WX3000有线无线一体化交换机由两个虚拟的系统组成，分别是无线控制引擎和交换引擎，是两
个独立的文件系统，有四类文件需要管理，分别是：
?    BootWare程序文件                        无线控制引擎上管理
?    应用程序文件                                无线控制引擎上管理
?    配置文件                                       两者分别存放管理
?    Web文件                                       只交换引擎

升级bootware，以tftp为例。

以太网口只能使用1/0/1接PC。

PC建好tftp服务器，ip 192.168.1.2 ，需要传送的文件放程序根目录。

 

Press Ctrl+B to enter extended boot menu...

Please input BootWare password:

 

Note: The current operating device is flash

Enter < Storage Device Operation > to select device.

 

===========================<EXTEND-BOOTWARE MENU>===========================

|<1> Boot System                                                           |

|<2> Enter Serial SubMenu                                                  |

|<3> Enter Ethernet SubMenu                                                |

|<4> File Control                                                          |

|<5> Modify BootWare Password                                              |

|<6> Skip Current System Configuration                                     |

|<7> BootWare Operation Menu                                               |

|<8> Clear Super Password                                                  |

|<9> Storage Device Operation                                              |

|<0> Reboot                                                                |

============================================================================

Enter your choice(0-9): 7

 

=========================<BootWare Operation Menu>==========================

|Note:the operating device is flash                                        |

|<1> Backup Full BootWare                                                  |

|<2> Restore Full BootWare                                                 |

|<3> Update BootWare By Serial                                             |

|<4> Update BootWare By Ethernet                                           |

|<0> Exit To Main Menu                                                     |

============================================================================

Enter your choice(0-4): 4

 

===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================

|<1> Update Full BootWare                                                  |

|<2> Update Extend BootWare                                                |

|<3> Update Basic BootWare                                                 |

|<4> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

============================================================================

Enter your choice(0-4): 4

 

==========================<ETHERNET PARAMETER SET>==========================

|Note:       '.' = Clear field.                                            |

|            '-' = Go to previous field.                                   |

|          Ctrl+D = Quit.                                                  |

============================================================================

Protocol (FTP or TFTP) :ftp tftp

Load File Name         :x.x

                       :WX3000-CMW520-R3111P12.bin

Target File Name       :x.x

                       :WX3000-CMW520-R3111P12.bin

Server IP Address      :x.x.x.x  192.168.1.2

Local IP Address       :x.x.x.x  192.168.1.1

Gateway IP Address     :x.x.x.x 不填

FTP User Name         :x     不填

FTP User Password      :x     不填

 

===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================

|<1> Update Full BootWare                                                  |

|<2> Update Extend BootWare                                                |

|<3> Update Basic BootWare                                                 |

|<4> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

============================================================================

Enter your choice(0-4): 1

Loading.....................................................................

............................................................................

............................................................................

............................................................................

............................................................................

..................................Done!

20701932 bytes downloaded!

Updating Basic BootWare? [Y/N]Y

Updating Basic BootWare.....Done!

Updating Extend BootWare? [Y/N]Y

Updating Extend BootWare......Done!

 

重启之后再到主菜单里面的
|<3> Enter Ethernet SubMenu              里面去升级应用程序。
升级完成后，交换引擎也会随之更新，并且所需相关web配置文件会自动解压出来。